Shop
POLINOX® mounted flap wheels, corrugated construction
POLINOX Mounted Flap WheelPOLINOX® mounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. Several wavily arranged strips of non-woven abrasive material are wound around a core. The wavy structure of the non-woven abrasive material creates a seamless matte finish on surfaces.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 inWidth2 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit100Max. RPM6000Pack qty5
POLINOX® Unitized Disc
POLINOX Unitized DiscPOLINOX® unitized discs are used for face-down grinding with variable speed angle grinders. Ideal for larger surfaces. The compressed, non-woven material is bonded to a fiberglass back. POLINOX® unitized discs are made of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The different combinations of compression, fibers, grain, and the appropriate bond create non-woven products that offer a very good surface finish, high stock removal rate and long tool life. These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing. Medium-hard version with increased edge strength and service life for coarse deburring and cleaning applications.Special featuresCost-effective due to high abrasive performance and durability.Produces very good surface quality.Can be profiled as desired, enabling optimal adjustment to the contour.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useConsiderably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionMH (medium-hard)Dia. External4 1/2 inWidth1/2 inDrive typeAngle grinderGritfineMax. RPM10000Pack qty5
POLINOX® Unitized Wheel
POLINOX Unitized WheelPOLINOX® unitized wheels are made of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. This particular bond results in non-woven products that create very good surface finishes and have high stock removal rate and long service life. These properties come into play especially when deburring, blending, finishing, and polishing soft metals, alloyed and high-alloy steels, as well as titanium alloys. This version for straight grinders, flexible shafts and bench grinders is designed for working on smaller surfaces. Hard version with very high stock removal rate, good edge strength, and long service life for tough deburring and polishing applications.Special featuresCost-effective due to high abrasive performance and durability.Produces very good surface quality.Can be profiled as desired, enabling optimal adjustment to the contour.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useConsiderably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionH (hard)Dia. External2 inWidth1/8 inDrive typeFlexible shaft driveGritfineMax. RPM15300Pack qty10
POLINOX® Unmounted Flap Wheel
POLINOX Unmounted Flap WheelPOLINOX® unmounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. This flap structure improves stock removal and achieves a coarser surface finish.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External6 inWidth2 inDrive typeBench grinderGrit100Max. RPM4000Pack qty1
POLINOX® unmounted flap wheels, radial construction
POLINOX Non-Woven Finishing DrumPOLINOX® unmounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. Non-woven abrasive flaps are arranged radially, and the wheels are durable due to the dense packing of the flaps. Ideal for surface work. The product is designed for working on medium-sized surfaces with speed-adjustable angle grinders and fillet weld grinders, and can be mounted directly onto the drive system's spindle without the need for additional clamping devices.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.Technical informationDia. External4 inWidth2 inDrive typeAngle grinderGrit100Max. RPM6000Pack qty5
POLINOX® unmounted flap wheels, interleaved construction
POLINOX Non-Woven Finishing DrumPOLINOX® unmounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. This flap structure improves stock removal and achieves a coarser surface finish. The product is designed for working on medium-sized surfaces with speed-adjustable angle grinders and fillet weld grinders, and can be mounted directly onto the drive system's spindle without the need for additional clamping devices. This product is mainly used for work on large surfaces.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 inWidth2 inDrive typeAngle grinderGrit100Max. RPM6000Pack qty5
POLIROLL® cartridge rolls, cylindrical
Cartridge RollFor universal grinding work on metals and other materials. POLIROLL cartridge rolls consist of spirally wound coated abrasives. The abrasive grain is embedded in the resinoid coating on the sturdy backing material, which achieves the best possible abrasive performance.Special featuresConsistently high grinding performance due to self-sharpening abrasive grain.Secure fit when in use due to self-tensioning provided by grooved, conical arbor.Easy product change.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumAnnealed cast ironBrassCast steelCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useGrind with the tip instead of the flat surface so as to not damage the bond through exposure to heat.Mount POLIROLL with the bonded side facing toward the arbor.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 2,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External1/4 inWidth1 inDrive typeFlexible shaft driveGrit60Max. RPM25000Pack qty50
POLIROLL® cartridge rolls, conical
Cartridge RollFor universal grinding work on metals and other materials. POLIROLL cartridge rolls consist of spirally wound coated abrasives. The abrasive grain is embedded in the resinoid coating on the sturdy backing material, which achieves the best possible abrasive performance.Special featuresConsistently high grinding performance due to self-sharpening abrasive grain.Secure fit when in use due to self-tensioning provided by grooved, conical arbor.Easy product change.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumAnnealed cast ironBrassCast steelCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useGrind with the tip instead of the flat surface so as to not damage the bond through exposure to heat.Mount POLIROLL with the bonded side facing toward the arbor.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 2,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External3/8 inWidth1 1/2 inDrive typeFlexible shaft driveGrit60Max. RPM24000Pack qty50
POLISTAR-TUBE Abrasive Star
POLISTAR-TUBE Abrasive StarPOLISTAR-TUBE products are made of multi-layered cross buffs that are riveted together. They are designed for working on the inner surfaces of pipes and pipe bends. Use cross buffs with the suitable flexible shafts 4 PST-T DIN 10/M4 (EDP 94264).Special featuresConforms to contours due to high flexibility.Stainless steel rivets prevent contamination of stainless steel (INOX) workpieces.Achieves very fine surface quality grades of up to 8 ?in (0.2 ?m).ApplicationsDeburringStep-by-step fine grindingLevelingStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useFor the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM.Select the POLISTAR diameter based on the respective pipe's inner diameter: Dia. 2" for inner pipe dia. 1-3/8" - 1-5/8"Grit size 60 designed for roughness value 1.0-1.3 ?m Ra.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External2 inDrive typeFlexible shaft driveGrit60Max. RPM7650Pack qty10
POLIVLIES® flap discs, aluminum oxide A
POLIVLIES Non-Woven Flap DiscFor universal coarse to fine grinding applications in industry and professional trades. These are ideal for large stainless steel (INOX) surfaces. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.Creates a consistently high surface quality throughout the entire service life, as new sharp abrasive material is constantly exposed.Conforms to contours due to high flexibility.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 6,000-7,000 SFPM.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersioncoarse, yellow-brownDia. External4 1/2 inWidth3/4 inDrive typeAngle grinderGrit100 GMax. RPM13300Pack qty5
POLIVLIES® flap discs, Ceramic oxide CO-COOL
POLIVLIES Non-Woven Flap DiscFor aggressive grinding with maximum stock removal rate on hard materials that do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding. These are ideal for large stainless steel (INOX) surfaces. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.Creates a consistently high surface quality throughout the entire service life, as new sharp abrasive material is constantly exposed.Conforms to contours due to high flexibility.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 6,000-7,000 SFPM.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 1/2 inWidth3/4 inDrive typeAngle grinderGritCO-COOL 60 / A 100 GMax. RPM13300Pack qty5
POLIVLIES® Hand Pad
POLIVLIES Hand PadDesigned for very fine grinding on small to large surfaces and contours, and for manually cleaning metal and painted surfaces. Achieve matte and satin-finished surfaces. Highly open structure.Special featuresConforms to contours due to high flexibility.Access hard-to-reach areas.ApplicationsCleaningStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)StoneThermoplasticsTitaniumTitanium alloysAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useCut to the necessary size if needed.Technical informationWidth6 inDrive typeManual applicationGrit100Pack qty20
POLIVLIES® Hook & Loop Disc
POLIVLIES Hook & Loop DiscPOLIVLIES® hook and loop discs are designed for grinding larger surfaces. The flexible system includes a POLIVLIES® hook and loop disc and the associated POLIVLIES® hook and loop disc holder for use on contours. The pre-punched holes mean the discs can be centered and used with various backing pads. These are ideal for large stainless steel (INOX) surfaces. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.Creates a consistently high surface quality throughout the entire service life, as new sharp abrasive material is constantly exposed.Conforms to contours due to high flexibility.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM.Use with POLIVLIES® hook and loop disc holder.Break out the pre-punched centering hole if needed.Technical informationVersioncoarse, yellow-brownDia. External4 1/2 inDrive typeAngle grinderGrit100 GMax. RPM5300Pack qty10
Portable Cut-Off Wheel, PSF CHOP STEEL
Technical informationDiameter14 InchWall thickness1/8 InchArbor hole20 mmShapeEHT / 41 / T1AbrasiveAluminum oxide ADrive typeElectric angle grinder, Gas sawMax. RPM5500Pack qty10Choose the Universal Line PSF for processing the most common materials. These robust products achieve good results with increased economic efficiency. PFERD TOOLS offers a variety of cut-off wheels for portable gas saws and electric cut-off grinder. These robust cut-off wheels are designed to cut steel, stone, concrete, cast iron and other materials.AdvantagesFast work due to high cutting performance.High economic efficiency due to good durability.ApplicationsCuttingMaterials that can be workedCast ironSteel
Portable Cut-Off Wheel, SG CAST+STONE
ShapeEHT / 41 / T1AbrasiveACDrive typeElectric angle grinder, Petrol cutterMax. RPM4800Pack qty10Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. PFERD offers a variety of cut-off wheels for portable gas saws and electric cut-off grinder. These robust cut-off wheels are designed to cut steel, stone, concrete, cast iron and other materials. Cut-off wheel for use on portable gas saws and cut-off grinders. High cutting performance and maximum service life.AdvantagesFast work due to high cutting performance.Maximum economic efficiency due to maximum durability.ApplicationsCuttingMaterials that can be workedConcreteCast ironDuctile cast ironReinforced concrete
Portable Cut-Off Wheel, SG STEEL
ShapeEHT / 41 / T1AbrasiveAluminum oxide ADrive typeElectric angle grinder, Petrol cutterMax. RPM6400Pack qty20Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. PFERD offers a variety of cut-off wheels for portable gas saws and electric cut-off grinder. These robust cut-off wheels are designed to cut steel, stone, concrete, cast iron and other materials. Cut-off wheel for use on portable gas saws and cut-off grinders. High cutting performance and maximum service life.AdvantagesFast work due to high cutting performance.Maximum economic efficiency due to maximum durability.ApplicationsCuttingMaterials that can be workedSteelCast iron
Portable Cut-Off Wheel, SG STONE
ShapeEHT / 41 / T1AbrasiveSilicon carbide SiCDrive typeElectric angle grinder, Petrol cutterMax. RPM6400Pack qty20Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. PFERD offers a variety of cut-off wheels for portable gas saws and electric cut-off grinder. These robust cut-off wheels are designed to cut steel, stone, concrete, cast iron and other materials. Cut-off wheel for use on portable gas saws and cut-off grinders. High cutting performance and maximum service life.AdvantagesFast work due to high cutting performance.Maximum economic efficiency due to maximum durability.ApplicationsCuttingMaterials that can be workedStoneConcreteAluminumAsphaltCast ironOther non-ferrous metals
Portable Cut-Off Wheel, SG STUD STEEL
Technical informationDiameter14 InchWall thickness7/64 InchArbor hole1 InchShapeEHT / 41 / T1AbrasiveAluminum oxide ABond hardnessK (very soft)Drive typeCHOPSAW HD, Stationary machinesMax. RPM4400Pack qty10PFERD offers cut-off wheels for chopsaws (CHOPSAW) in different versions and dimensions. Cut-off wheels for chopsaws are used for cutting solid material, profiles and pipes. The wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. K hardness wheel with two outer reinforcement layers. For cutting work that requires high stability.AdvantagesHigh lateral stability due to outer reinforcement layers.Maximum economic efficiency due to very long service life.Designed for cutting bundled or stacked drywall profiles and other thin steel profiles.ApplicationsCuttingCutting of pipesCutting of profilesCutting of solid materialMaterials that can be workedSteelSafetyUse only on stationary machines with an output of up to 5 horsepower or less.
Power Tube Brush
Technical informationBrush Diameter3/8 InchFilament MaterialBrass wire (MES)Wire Diameter0.005 InchShank Diameter5/32 InchMax. RPM2500 RPMPack Qty36For light cleaning and deburring work on threaded holes or recesses, e.g. keyways. Brass wire filament brushes are designed for applications like surface finishing on copper or brass workpieces. Compared to steel wire, brass wire is softer and more flexible. For all brushes with brass wire, PFERD uses wire quality CuZn37. Brass wire is temperature-resistant up to 350°F.AdvantagesHighly flexible, enabling optimal adaptation to the workpiece contour.Longer service life due to the design of the stem.In tube brushes with a short eyelet, the filament reaches up to the tip of the brush.The bent end of the wire does not have any sharp edges, which prevents delicate surfaces from getting scratched.Low-sparking.Creates fine surfaces.ApplicationsCleaningDeburringRemoving oxide layersMaterials that can be workedZincBrassCopperOther non-ferrous metalsDrive TypesFlexible shaft driveManual applicationPower drillSafetyFor safe use, guide the brush into the workpiece before beginning work. When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Power Tube Brush
Technical informationBrush Diameter1/2 InchFilament MaterialStainless steel wire (INOX)Wire Diameter0.004 InchShank Diameter5/32 InchMax. RPM2500 RPMPack Qty10The high-performance tube brush is highly designed for deburring cross holes and for cleaning threads. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.AdvantagesLong tool life due to high filament density and double spirals.Very corrosion-resistant.Creates fine surfaces.ApplicationsCleaningDeburringDerustingRemoving heat discolourationRemoving oxide layersPaint strippingRougheningMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)TitaniumTitanium alloysAluminumBronzeCobalt-based alloysHard non-ferrous metalHigh-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Drive TypesFlexible shaft driveManual applicationPower drillSafetyFor safe use, guide the brush into the workpiece before beginning work. When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Pressure-Sensitive Adhesive Disc (PSA)
Pressure-Sensitive Adhesive Disc (PSA)The flexible system includes hook and loop abrasive discs and holder and can be used on contours. The holder allows hook and loop abrasive discs to be used with commercially available speed-adjustable or slow-running angle grinders.Special featuresConforms to contours due to high flexibility.Quick and easy product change.High-quality adhesive keeps disc secured to holder.ApplicationsFinishingStep-by-step fine grindingLevelingSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumCast steelCopperHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useUse abrasive discs with abrasive disc holder.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 5,000 SFPM.Technical informationDia. External5 inDrive typeFlexible shaft driveGrit36Max. RPM4850Pack qty50
Quick-Mounting 3-Adapter Set for 9/16"-1-3/16" Hole Saws
PFERD offers hole saw adapters. These adapters allow for quick and easy switching between hole saws while using the same arbor. These adapter sets contain three adapters with the same dimensions.Recommendations for useQuickly and easily screw the adapters into the desired hole saw and clamp them into the quick-mounting system.Due to the high torque levels involved, when using large hole saws PFERD recommends the use of the PSL quick-mounting systems in conjunction with the AD-PSL 102-210 HEAVY DUTY adapter.
Quick-mounting handles
Technical informationPFERD Quick Mount File Handle for Needle Diamond and Small FilesItem number12605004EDP no.16174Length3.5 InchPFERD TOOLS typeSH 220Packaging unit10 EACHPFERD offers file handles in different versions and dimensions. From wooden handles for chain saw files to ergonomic file handles for machinist's files, sharpening files or rasps, to quick-mounting handles for needle files or precision files, PFERD has handles for a wide variety of files. Quick-mounting handles for needle files, diamond files and smaller machinist and precision files. The handle design enables quick and easy file clamping. Quick-mounting handle for needle files, diamond files, and smaller machinist and precision files.Special featuresReliably clamp the file tang into the handle by simply twisting the two halves of the handle.Compatible power toolsManual application
Replacement file depth gauge files
Technical informationPFERD Replacement Depth Gauge File for the CHAIN SHARP CS-XItem number11692202Cut2Cut files typeSecondEDP no.17310Height15/64 InchLength8 InchPFERD TOOLS type4132Width23/64 InchPackaging unit10 EACHPFERD offers replacement files for different filing tools, such as replacement files for paint peelers, replacement file blades for universal chamfer files, chain saw files, and depth gauge files for chain saw sharpeners. Rectangular file with cut on two sides. Designed for the CHAIN SHARP CS-X chain saw sharpener.Special featuresStock removal rate is precisely tailored to the depth gauge.Workpiece materialsSteels up to 370 HV (< 38 HRC)ApplicationsSharpeningCompatible power toolsManual application