POLIROLL® cartridge rolls, 1/4 x 1 1/2", 60 Grit
PFERD TOOLS
$0.00
Product number:
47101129
Product information "POLIROLL® cartridge rolls, 1/4 x 1 1/2", 60 Grit"
Technical information
1/4 x 1 1/2", 60 Grit
| Dia. External | 1/4 in |
| Width | 1 1/2 in |
| Drive type | Flexible shaft drive |
| Grit | 60 |
| Max. RPM | 25000 |
| Pack qty | 50 |
For universal grinding work on metals and other materials. POLIROLL cartridge rolls consist of spirally wound coated abrasives. The abrasive grain is embedded in the resinoid coating on the sturdy backing material, which achieves the best possible abrasive performance.
Special features
- Consistently high grinding performance due to self-sharpening abrasive grain.
- Secure fit when in use due to self-tensioning provided by grooved, conical arbor.
- Easy product change.
Applications
- Deburring
- Step-by-step fine grinding
- Leveling
- Sharpening
- Work on weld seams
- Working on edges
Materials that can be worked
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Thermoplastics
- Titanium
- Annealed cast iron
- Brass
- Cast steel
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Hardened, heat-treated steels over 370 HV (38 HRC)
Recommendations for use
- Grind with the tip instead of the flat surface so as to not damage the bond through exposure to heat.
- Mount POLIROLL with the bonded side facing toward the arbor.
- Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
Safety
- The maximum permitted peripheral speed is 2,300 SFPM.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
| Pack Qty: | 50 |
|---|
Login
No reviews found. Share your insights with others.