POLINOX® mounted flap wheels, corrugated construction
PFERD TOOLS
$0.00
Product number:
47802478-P
Product information "POLINOX® mounted flap wheels, corrugated construction"
POLINOX Mounted Flap Wheel
POLINOX® mounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. Several wavily arranged strips of non-woven abrasive material are wound around a core. The wavy structure of the non-woven abrasive material creates a seamless matte finish on surfaces.
Special features
- Conforms to contours due to high flexibility.
- Cool grinding and low thermal load on the workpiece.
- The open structure and high flexibility of the non-woven material prevents loading.
Applications
- Cleaning
- Deburring
- Step-by-step fine grinding
- Roughening
- Structuring (matt finishing, brush matting and satin finishing)
- Surface work
Materials that can be worked
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Zinc
- Aluminum
- Brass
- Bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Hardened, heat-treated steels over 370 HV (38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
Recommendations for use
- For the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.
Safety
- The maximum permitted peripheral speed is 6,300 SFPM.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Technical information
| Dia. External | 4 in |
| Width | 2 in |
| Dia. shank | 1/4 Inch |
| Drive type | Flexible shaft drive |
| Grit | 100 |
| Max. RPM | 6000 |
| Pack qty | 5 |
| Dia. shank: | 1/4 Inch |
|---|---|
| Drive Type: | Flexible shaft drive |
Login
No reviews found. Share your insights with others.