Coated abrasives
Abrasive Benchstand Belt
Abrasive Benchstand BeltFor universal applications from coarse to fine grinding. Long belts are compatible with commonly available belt grinders.Special featuresHigh tear strength with optimum flexibility.Consistent work results due to high grain adhesion.Cost-effective due to high abrasive performance and durability.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyFollow all safety instructions for abrasive belt use.Technical informationWidth2 inDrive typeBelt grinderGrit36Pack qty10
Abrasive File Belt
Abrasive File BeltFor universal applications from coarse to fine grinding. Short belts are compatible with commonly available belt grinders.Special featuresHigh tear strength with optimum flexibility.Consistent work results due to high grain adhesion.Cost-effective due to high abrasive performance and durability.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyFollow all safety instructions for abrasive belt use.Technical informationWidth1/4 inDrive typeBelt grinderGrit36Pack qty50
Abrasive spiral bands, conical
Spiral BandFor aggressive grinding with maximum stock removal on hard materials that do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding. In ISO 2421, abrasive spiral bands are designated as "cylindrical sleeves". GSB = bulk pack of abrasive spiral bandsSpecial featuresThe packaging size is ideally suited to industrial requirements.Abrasive spiral bands fit securely on the rubber drum holder as the holder expands during use.Outstanding service life even under the toughest work conditions, due to special manufacturing.Highest possible cost-effectiveness due to particularly high stock removal rate and aggressiveness of the abrasive.ApplicationsDeburringStep-by-step fine grindingLevelingRougheningSharpeningSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)TitaniumAluminumAnnealed cast ironBronzeCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTo easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the power tool.To ensure the abrasive spiral band is securely attached, follow the minimum speed for the rubber drum holder.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 6,000 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.Technical informationDia. External3/4 inDrive typeFlexible shaft driveGrit36Pack qty100
Cloth Backed Abrasive Sheet
Cloth Backed Abrasive SheetThe brown cloth-backed sheet is ideal for universal, heavy-duty use on alloyed and non-alloyed steels, as well as non-ferrous metals. The cloth-backed abrasive sheets comply with ISO 21948.Special featuresHigh grain adhesion on very flexible cloth.High abrasive performance.Oil and kerosene-resistant.High tear strength with optimum quality.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTear to the necessary size as needed.Technical informationWidth9 inDrive typeManual applicationGrit40Pack qty50
Fiber Disc
Fiber DiscPFERD fiber discs are manufactured in accordance with ISO 16057 in shape A2 version F under the designation "vulcanized fiber disc". For universal grinding work from coarse to fine grinding in industry and professional trades.Special featuresHigh productivity due to long service life and very high stock removal rate.Consistent surface finish resulting from high-quality abrasives.Conforms to contours due to high flexibility.ApplicationsDeburringStep-by-step fine grindingLevelingSurface workWork on weld seamsWorking on edgesMaterials that can be workedSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useUse fiber disc in accordance with ISO 15636 with backing pad on commercially available angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 15,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External7 inDrive typeAngle grinderGrit16Max. RPM8500Pack qty25
POLICAP® abrasive caps, cylindrical with pointed cone end, shape WKG
POLICAP Seamless Abrasive CapPOLICAP® abrasive caps in tapered conical shape with radius end, shape G. The taper angle of the cone is 30°. POLICAP® products have a seamless design and the entire surface area can be used. For universal use on steel workpieces (hardened, heat-treated, non-hardened). Specifically developed for special applications, e.g. in tool and die-making and repair. Also works on plastics, wood and fillers in model crafting. Color code for grit size 60 = brownSpecial featuresAbrasive caps and cones fit securely on the holder as it expands during use.Consistent shape accuracy and excellent fine grinding due to special manufacturing.Easy product change.ApplicationsStep-by-step fine grindingLevelingSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast steelHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useTo easily change the abrasive caps and cones, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder clamped in the power tool, and fix in place.For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.SafetyThe maximum permitted peripheral speed is 5,500 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External9/32 inDrive typeFlexible shaft driveGrit60Pack qty50
POLICAP® abrasive caps, cylindrical, shape A
POLICAP Seamless Abrasive CapPOLICAP® abrasive caps in cylindrical shape, shape A. POLICAP® products have a seamless design and the entire surface area can be used. For universal use on steel workpieces (hardened, heat-treated, non-hardened). Specifically developed for special applications, e.g. in tool and die-making and repair. Also works on plastics, wood and fillers in model crafting. Color code for grit size 60 = brownSpecial featuresAbrasive caps and cones fit securely on the holder as it expands during use.Consistent shape accuracy and excellent fine grinding due to special manufacturing.Easy product change.ApplicationsStep-by-step fine grindingLevelingSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast steelHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useTo easily change the abrasive caps and cones, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder clamped in the power tool, and fix in place.For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.SafetyThe maximum permitted peripheral speed is 5,500 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External9/32 inDrive typeFlexible shaft driveGrit60Pack qty50
POLICAP® abrasive caps, tapered with radius end, shape KEL
POLICAP Seamless Abrasive CapPOLICAP® abrasive caps in conical shape with radius end, shape L. POLICAP® products have a seamless design and the entire surface area can be used. For universal use on steel workpieces (hardened, heat-treated, non-hardened). Specifically developed for special applications, e.g. in tool and die-making and repair. Also works on plastics, wood and fillers in model crafting. Color code for grit size 60 = brownSpecial featuresAbrasive caps and cones fit securely on the holder as it expands during use.Consistent shape accuracy and excellent fine grinding due to special manufacturing.Easy product change.ApplicationsStep-by-step fine grindingLevelingSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast steelHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useTo easily change the abrasive caps and cones, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder clamped in the power tool, and fix in place.For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.SafetyThe maximum permitted peripheral speed is 5,500 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External7/16 inDrive typeFlexible shaft driveGrit60Pack qty50
POLIFLAP® Abrasive Flaps
POLIFLAP Abrasive FlapsThe POLIFLAP® system is ideal for blending and restoring surface textures, fine grinding of radii, contours, curved areas, and large surfaces. Abrasive flaps designed for POLIFLAP® grinding wheels, used to create a range of visual effects from coarse to very fine.Special featuresComfortable to use and easy to replace once worn.ApplicationsDeburringStep-by-step fine grindingLevelingStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationWidth2 3/8 inDrive typeFlexible shaft driveGrit60Pack qty12
POLIROLL® cartridge rolls, conical
Cartridge RollFor universal grinding work on metals and other materials. POLIROLL cartridge rolls consist of spirally wound coated abrasives. The abrasive grain is embedded in the resinoid coating on the sturdy backing material, which achieves the best possible abrasive performance.Special featuresConsistently high grinding performance due to self-sharpening abrasive grain.Secure fit when in use due to self-tensioning provided by grooved, conical arbor.Easy product change.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumAnnealed cast ironBrassCast steelCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useGrind with the tip instead of the flat surface so as to not damage the bond through exposure to heat.Mount POLIROLL with the bonded side facing toward the arbor.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 2,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External3/8 inWidth1 1/2 inDrive typeFlexible shaft driveGrit60Max. RPM24000Pack qty50
Unmounted Flap Wheel
Unmounted Flap WheelWith unmounted flap wheels, coated abrasive flaps are arranged radially around the core in a fan-like structure. The flexible flaps perfectly adapt to surface contours. The abrasive grain is embedded in the sturdy, flexible cloth backing material with a resinoid bond. In ISO 5429, unmounted flap wheels are designated as "flap wheels." For universal applications from coarse to fine grinding.Special featuresConforms to contours due to high flexibility.Consistently high stock removal rate throughout the entire service life as new, aggressive abrasive is constantly exposed.Can be used face-down very close to edges and in corners thanks to special clamping system.ApplicationsDeburringStep-by-step fine grindingLevelingStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useFlap wheel wear and the thermal load on the workpiece are reduced by decreasing the contact pressure and peripheral speed, and by adding grinding oil.Stock removal rate should be increased by using a coarser grit, not by increasing the contact pressure. This avoids unnecessary flap wheel wear and prevents the thermal load of the workpiece.Increasing the speed results in a slightly finer surface quality. An increase in contact pressure results in a slightly coarser surface. The softer the workpiece material, the coarser the resulting surface (when using the same grit size).For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.For the best results, use a power tool with 1,000–1,500 watts.SafetyUnmounted flap wheels should only be used with the appropriate clamping flanges.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.The contact pressure has to be reduced significantly when the optimum rotational speed is exceeded.The maximum permitted peripheral speed is 9,800 SFPM.Technical informationDia. External4 inWidth1 inDrive typeFlexible shaft driveGrit40Max. RPM9500Pack qty2