Diamond grinding disc CC-GRIND®-SOLID DIAMOND

Diamond Grinding Disc, CC-GRIND-SOLID Diamond, 4-1/2" x 7/8"

GritD852Drive typeAngle grinderDrive type 2RobotDrive type 3Stationary machinesDia. hole7/8 InchMax. RPM13300Pack qty1Diamond Grinding Disc, CC-GRIND-SOLID Diamond, 4-1/2" x 7/8"The CC-GRIND®-SOLID-DIAMOND has been specially developed for applications on hard materials which cannot be machined with conventional tools made of aluminum oxide or silicon carbide. The CC-GRIND®-SOLID-DIAMOND is used for both wet and dry grinding. Matching clamping flange set (M14 thread) is included.Special featuresFast, aggressive grinding with maximum stock removal rateEasy and quick elimination of metal contamination due to diamond’s super-hard abrasive qualitiesLower dust load due to the dimensional stability of the grinding tool (no tool wear)ApplicationsDeburringDescalingGrinding outLevelingRemoving oxide layersRougheningRoundingSurface workTrimmingWork on weld seamsWorking on edgesWorking on edges (chamfering, rounding)Materials that can be workedTechnical ceramicsTungsten carbideWear-resistant coatings (powder metal alloys and hardfacing alloys)Grey/nodular cast iron (GG/GJL, GGG/GJS)Nickel or titanium-based superalloysScaleRecommendations for useOnly use the face of the disc, not suitable for peripheral grinding (on edge).To extend the service life of the grinding disc on scale and wear-resistant coatings, reduce the cutting speed of the speed-adjustable angle grinder to 30 to 40 m/s.For the best results, use with the CC-GRIND®-SOLID/FLEX clamping flange set.When used on angle grinders with a 5/8-11 thread, the matching clamping flange set must be ordered separately.