Shop

4-1/2"/5" ALUMASTER Carbide Insert Set - 10 Inserts

Specially developed cutting inserts from PFERD are durable and achieve a high stock removal rate. Cutting insert set for ALUMASTER High Speed Disc.

4-1/2"/5" ALUMASTER Service Set - TORX Key, 2 Screws, 2 Inserts

These service sets from PFERD allow the most common parts to be replaced in case of loss or damage. PFERD offers a replacement parts set for hole saw arbors and a service set for the ALUMASTER High Speed Disc. For swapping individual cutting inserts on the ALUMASTER High Speed Disc. This set contains two cutting inserts, two screws, and a hexalobular socket wrench.

Abrasive Benchstand Belt

Abrasive Benchstand BeltFor universal applications from coarse to fine grinding. Long belts are compatible with commonly available belt grinders.Special featuresHigh tear strength with optimum flexibility.Consistent work results due to high grain adhesion.Cost-effective due to high abrasive performance and durability.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyFollow all safety instructions for abrasive belt use.Technical informationWidth2 inDrive typeBelt grinderGrit36Pack qty10

Abrasive File Belt

Abrasive File BeltFor universal applications from coarse to fine grinding. Short belts are compatible with commonly available belt grinders.Special featuresHigh tear strength with optimum flexibility.Consistent work results due to high grain adhesion.Cost-effective due to high abrasive performance and durability.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyFollow all safety instructions for abrasive belt use.Technical informationWidth1/4 inDrive typeBelt grinderGrit36Pack qty50

Abrasive spiral bands, conical

Spiral BandFor aggressive grinding with maximum stock removal on hard materials that do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding. In ISO 2421, abrasive spiral bands are designated as "cylindrical sleeves". GSB = bulk pack of abrasive spiral bandsSpecial featuresThe packaging size is ideally suited to industrial requirements.Abrasive spiral bands fit securely on the rubber drum holder as the holder expands during use.Outstanding service life even under the toughest work conditions, due to special manufacturing.Highest possible cost-effectiveness due to particularly high stock removal rate and aggressiveness of the abrasive.ApplicationsDeburringStep-by-step fine grindingLevelingRougheningSharpeningSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)TitaniumAluminumAnnealed cast ironBronzeCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTo easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the power tool.To ensure the abrasive spiral band is securely attached, follow the minimum speed for the rubber drum holder.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 6,000 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.Technical informationDia. External3/4 inDrive typeFlexible shaft driveGrit36Pack qty100

BADGER | EZ Strip Wheel | 4" x 1" x 1/4" | Coarse

Non-Woven Strip Wheel, Series: EZ Series, Double Spindle Attachment, Silicon Carbide Abrasive, 4 in Wheel Diameter, 1/4 in Center Hole, 1 in Face Width, Coarse Grade, 8000 rpm Maximum, Black

Badger | Grinding & Pipeline Disc | Zirconia | Type 27

Badger | Grinding & Pipeline Discs | Aluminum Oxide | Type 27

Badger | Xtreme Cutting Wheel | Zirconia | Type 1

Badger | Xtreme Cutting Wheel | Zirconia | Type 27

Badger | Xtreme Flap Disc | Zirconia | HIGH DENSITY | Type 29

Premium Zirconia X weight Poly/Cotton blend. Most preferred material for flap discs worldwide.  This zirconia is a self sharpening grain offering continuous rate of cut and longevity. Ideally suited for all general grinding and blending of most materials.

Badger | Xtreme Flap Disc | Zirconia | STANDARD DENSITY | Type 29

Premium Zirconia X weight Poly/Cotton blend. Most preferred material for flap discs worldwide.  This zirconia is a self sharpening grain offering continuous rate of cut and longevity. Ideally suited for all general grinding and blending of most materials.

Bench grinding wheels CARBIDE

Bench grinding wheels CARBIDEPFERD bench grinding wheels have been designed to work with standard bench grinders. CARBIDE type bench grinding wheels are used on hard materials, such as for sharpening tungsten carbide tools.Special featuresDurable.High dimensional stability.High abrasive performance.Integrated telescopic bushings for mounting on almost any bench grinder spindle.ApplicationsDeburringSharpeningWorking on edges (chamfering, rounding)Materials that can be workedSteel materials with a hardness > 54 HRCTungsten carbideGlassHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useDressing the wheel on a regular basis exposes sharp grain and maintains an even grinding area.Constantly adjust the workpiece support to the grinding wheel diameter (gap width max. 1/8").SafetyThe maximum permitted peripheral speed is 6,900 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Before clamping, the grinding tool must be ring tested to make sure that it does not have any cracks (undamaged grinding tools give a clear tone).

Bench grinding wheels HSS

Bench grinding wheels HSSPFERD bench grinding wheels have been designed to work with standard bench grinders. The HSS design is ideal for sharpening HSS pilot drills or machining other high-alloy steels.Special featuresDurable.High dimensional stability.High abrasive performance.Integrated telescopic bushings for mounting on almost any bench grinder spindle.ApplicationsDeburringSharpeningWorking on edges (chamfering, rounding)Materials that can be workedTool steelsCase-hardened steelsHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useDressing the wheel on a regular basis exposes sharp grain and maintains an even grinding area.Constantly adjust the workpiece support to the grinding wheel diameter (gap width max. 1/8").SafetyThe maximum permitted peripheral speed is 6,900 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Before clamping, the grinding tool must be ring tested to make sure that it does not have any cracks (undamaged grinding tools give a clear tone).

Bench grinding wheels UNIVERSAL

Bench grinding wheels UNIVERSALPFERD bench grinding wheels have been designed to work with standard bench grinders. The UNIVERSAL type is ideal for general workshop use.Special featuresDurable.High dimensional stability.High abrasive performance.Integrated telescopic bushings for mounting on almost any bench grinder spindle.ApplicationsDeburringSharpeningWorking on edges (chamfering, rounding)Materials that can be workedStainless steel (INOX)SteelCast ironRecommendations for useDressing the wheel on a regular basis exposes sharp grain and maintains an even grinding area.Constantly adjust the workpiece support to the grinding wheel diameter (gap width max. 1/8").SafetyThe maximum permitted peripheral speed is 6,900 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Before clamping, the grinding tool must be ring tested to make sure that it does not have any cracks (undamaged grinding tools give a clear tone).

Cant saw file

Technical informationPFERD Cant Saw File 8" Three Square Second CutItem number11633202Cut2Cut files typeSecondEDP no.17014Height1/2 InchLength8 InchPFERD TOOLS type1230Width7/8 InchPackaging unit10 EACHThree square saw files from PFERD are triangular tapered tanged files. The saw files are suitable for use on steel and cast steel and especially suitable for sharpening sawing tools. PFERD offers three square saw files in various versions and shapes. Triangular file, tanged. Cut on three sides, non-equilateral triangular shape. Second cut for universal sharpening tasks. Files come in industrial packaging without handles.Special featuresGood stock removal rate.Durable.Versatile.Workpiece materialsSteels up to 370 HV (< 38 HRC)Cast steelApplicationsSharpeningCompatible power toolsManual application

Car body file blades hand

Technical informationPFERD Car Body File 14" Milled Tooth Cut 1Item number14101351Cut1EDP no.14006Height7/32 InchLength14 InchPFERD TOOLS type299 bWidth1.34375 InchVersioncoarsePackaging unit1 EACHCar body file blades in the holder can be precisely tensioned and adjusted to match the surface contour of the workpiece. Radial special coarse cut for very coarse stock removal and roughing. The cut is designed to achieve score-free surfaces. These car body files comes in industrial packaging without car body file holders. They are also individually packaged in plastic sleeves.Special featuresThe tensioning system makes it easy to adjust the bending radius of the file.Precise handling.Razor-sharp tooth edges.Convex shape of the file prevents unwanted scratches.Workpiece materialsSteels up to 370 HV (< 38 HRC)AluminumApplicationsLevelingSurface workCompatible power toolsManual application

Car body file holder

Technical informationPFERD Adjustable Holder 12" for Car Body FileItem number14000167EDP no.14012PFERD TOOLS typeKFHPackaging unit1 EACHPFERD offers holders for a range of files and file blades. The PFERD product range includes riffler file holders, adjustable holders for car body files and holders for file blades, tungsten carbide files and hand deburrers. Adjustable car body file holders allow precise tensioning of the file blade to match the workpiece surface contour. The tensioning system makes it easy to adjust the bending radius of the file to be adjusted. This ergonomic and particularly lightweight holder enables precise tensioning of car body file blades to match the workpiece surface contour.Special featuresThe tensioning system makes it easy to adjust the bending radius of the file.Particularly lightweight plastic design containing no plasticizers.Can be curved or straight, allowing it to be used on a specific spot or a wide area.Vibration-damping rubber pad reduces fatigue.Compatible power toolsManual application

Car body files tanged hand

Technical informationPFERD Car Body File 14" Cut 3 Milled Tooth with TangItem number14103353Cut3Cut files typeSmoothEDP no.14010Height5/16 InchLength14 InchPFERD TOOLS type299 cWidth1.375 InchPackaging unit5 EACHFile curved in longitudinal and transverse direction (convex), tanged. Cut on one side. Radial fine cut for fine stock removal and finishing. The cut is designed to achieve score-free surfaces. These tanged car body files come in industrial packaging without handles.Special featuresConvex shape of the file prevents unwanted scratches.Precise handling.Workpiece materialsSteels up to 370 HV (< 38 HRC)AluminumApplicationsDeburringLevelingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application

CGW | Cut-Off | Chop-Saw | Aluminum Oxide | Type 1

• A: Aluminum Oxide - Metal & Steel. 14" available in single (SR) and double (DR) fiberglass reinforced. • Fast Cut: Economical choice for metal, steel and general applications.

CGW | Cut-Off | Contaminant Free | WA - White Aluminum Oxide | Type 1

• WA: White Aluminum Oxide grain for stainless steel. • Contaminant free wheels contains 0.1% iron, sulfur, or chlorine for rust-free and corrosion-free results. • High quality grain mixture is more friable and cuts freely.

CGW | Cut-Off | High Speed Gas Saws | Aluminum Oxide | Type 1

• A24R: Aluminum Oxide - Metal & Steel, Stainless. General purpose. 14" are available in both double and triple reinforced. • A24T: Aluminum Oxide - Metal Decking & Cable. Harder bond for more cuts on thinner metals. 14" are triple reinforced. • AC: (Mix of A/C) - Used on Ductile Iron. 14" are available in both double and triple reinforced. • C16: Silicon Carbide - Asphalt/Green Concrete • C24: Silicon Carbide - Stone/Concrete

CGW | Cut-Off | Quickie Cut | Zirconia | Type 1

• ZA: Zirconia and Aluminum Oxide mixture. All purpose wheel. Zirconia grain allows for faster cutting and longer life. Excellent on Steel/Stainless. • ZA60-TB-Flex: Flexible wheel design for fast cutting and easy work penetration. • ZA-36-T-Rigid: Thicker (.045), rigid wheel design for fast cutting and longer life.

CGW | Cut-Off Blades | Stationary Saw | Aluminum Oxide | Type 1

Stationary saw cut-off wheels cut structural steel, bar stock, tubing and non-ferrous metals. • A: Aluminum Oxide - Metal & Steel. • Economical choice for metal, steel and general applications.