Shop
POLICAP® Cylindrical Holder
POLICAP Cylindrical HolderMatching POLICAP® abrasive cap holder in cylindrical shape, shape A (ZYA).Special featuresAbrasive caps and cones fit securely on the holder as it expands during use.Easy product change.Recommendations for useTo easily change the abrasive caps and abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder engaged in the power tool and fix in place.For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.SafetyThe maximum permitted peripheral speed is 5,500 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External3/16 inWidth3/8 inDia. shank1/8 InchDrive typeFlexible shaft driveMax. RPM95000Pack qty5
POLICAP® Seamless Abrasive Cap Set
POLICAP Seamless Abrasive Cap SetSet of different POLICAP® abrasive caps with matching holder. POLICAP® products have a seamless design and the entire surface area can be used. Grit size color code: 60 and 80 = brown, 150 = black, 280 = red brown Cylindrical shape A (ZYA).Special featuresSturdy, reusable plastic packaging.Abrasive caps and cones fit securely on the holder as it expands during use.Consistent shape accuracy and excellent fine grinding due to special manufacturing.Easy product change.ApplicationsStep-by-step fine grindingLevelingSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast steelHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useTo easily change the abrasive caps and cones, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder clamped in the power tool, and fix in place.For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.SafetyThe maximum permitted peripheral speed is 5,000 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationShapeAWidth5 3/4 inDrive typeFlexible shaft drivePack qty1
POLICAP® Seamless Abrasive Cone
POLICAP Seamless Abrasive ConePOLICAP® abrasive spiral bands with a conical shape. POLICAP® products have a seamless design and the entire surface area can be used. For universal use on steel workpieces (hardened, heat-treated, non-hardened). Specifically developed for special applications, e.g. in tool and die-making and repair. Also works on plastics, wood and fillers in model crafting.Special featuresConsistent shape accuracy and excellent fine grinding due to special manufacturing.Easy product change.ApplicationsStep-by-step fine grindingLevelingSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast steelHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useTo easily change the abrasive caps and cones, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder clamped in the power tool, and fix in place.For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.SafetyThe maximum permitted peripheral speed is 5,500 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External9/32 inDrive typeFlexible shaft driveGrit60Pack qty10
POLICLEAN® Drive Arbor
POLICLEAN Drive ArborArbors for mounting fine-grinding and polishing products are available in different versions with different threads and shank diameters. Arbor for POLICLEAN® wheels. This type has space for one disc.Special featuresReduced down time due to quick changes.Recommendations for useWhen replacing discs, leave the arbor clamped in the power tool.Technical informationVersionPackaging, 1xDia. shank1/4 InchDrive typeFlexible shaft drivePack qty1
POLICLEAN® PLUS Disc
POLICLEAN PLUS DiscThe non-woven cleaning material is glued to a fiberglass backer. This makes POLICLEAN® PLUS discs ideal for face-down grinding. For coarse cleaning work such as removing paint, scale, heat discoloration, rust and adhesive residues. POLICLEAN® is a coarsely structured, abrasive, non-woven cleaning fabric that was developed from a special combination of synthetic fibers and abrasive grain.Special featuresThe PLUS version (blue) has a considerably higher stock removal rate and a very good service life, and it is very aggressive.High flexibility and open structure mean optimal adaptation to contours and no loading of the product itself.ApplicationsCleaningRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperElastomersFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 6,000-7,000 SFPM.Preferably for use on slow-running angle grinders.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionPCLD PLUSDia. External4 1/2 inWidth1/2 inDrive typeFlexible shaft driveMax. RPM10000Pack qty5
POLICLEAN® PLUS Unmounted Wheel
POLICLEAN PLUS Unmounted WheelFor coarse cleaning work such as removing paint, scale, heat discoloration, rust and adhesive residues in peripheral grinding. POLICLEAN® is a coarsely structured, abrasive, non-woven cleaning fabric that was developed from a special combination of synthetic fibers and abrasive grain.Special featuresThe PLUS version (blue) has a considerably higher stock removal rate and a very good service life, and it is very aggressive.High flexibility and open structure mean optimal adaptation to contours and no loading of the product itself.ApplicationsCleaningRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperElastomersFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.For work on larger surfaces, stack several POLICLEAN® discs on the appropriate arbor.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionPCLS PLUSDia. External4 inWidth1/2 inDrive typeFlexible shaft driveMax. RPM7500Pack qty4
POLIFLAP® Abrasive Flaps
POLIFLAP Abrasive FlapsThe POLIFLAP® system is ideal for blending and restoring surface textures, fine grinding of radii, contours, curved areas, and large surfaces. Abrasive flaps designed for POLIFLAP® grinding wheels, used to create a range of visual effects from coarse to very fine.Special featuresComfortable to use and easy to replace once worn.ApplicationsDeburringStep-by-step fine grindingLevelingStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationWidth2 3/8 inDrive typeFlexible shaft driveGrit60Pack qty12
Poliflex Mounted Point, Leather Bond, B122 Shape
Poliflex Mounted Point, Leather Bond, B122 ShapePoliflex® fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances. They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and die-making applications. Poliflex® finishing points with the leather bond are manufactured with white aluminum oxide. The leather (LR) bond is a hard, sturdy bond. Ideal for use on surfaces. Finishing point in spherical shape for fine grinding inner radii, contours and transitions.Special featuresProduces a fine, shiny surface finish.Produces very good surface quality.Cost-effective due to durability and high stock removal rate.Highly convenient to use due to precise concentricity.ApplicationsStep-by-step fine grindingMaterials that can be workedSteel materials with a hardness > 54 HRCTitaniumTitanium alloysAluminumBrassBronzeCobalt-based alloysCopperHardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useDepending on the intended use, profile using a dressing diamond or ceramic dressing stone at a low rotational speed.For best performance, use at a recommended peripheral speed of 3,000-4,000 SFPM.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.The clamping length of the shank must be at least 1/2".Technical informationShapeB 122BondLRDia. External3/8 inWidth3/8 inDia. shank1/8 InchDrive typeFlexible shaft driveGrit120Max. RPM68740Pack qty10
POLINOX® Convolute Wheel
POLINOX Convolute WheelPOLINOX® convolute wheels produce matte surface finishes. POLINOX® convolute wheels are made of spiral-shaped, non-woven abrasive which is wound around a core and foamed up. The foam supports the non-woven component and positively impacts its service life and abrasive performance. This particular bond results in non-woven wheels with a very good surface finish, high stock removal rate and long service life. These properties are particularly apparent when deburring, blending, finishing and polishing soft metals, alloyed and high-alloy steels, in addition to titanium alloys. The wheels can be used on stationary machines and bench grinders, as well as portable power tools like straight grinders. Dressing the wheels allows them to adapt to different workpiece geometries. Medium-soft variant with increased flexibility and extended service life, for tough blending and polishing applications. Well suited to machining contours.Special featuresCost-effective due to high abrasive performance and durability.Produces very good surface quality.Can be profiled as desired, enabling optimal adjustment to the contour.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useConsiderably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.For the best performance, use with a recommended peripheral speed of 4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.The spiral-wound construction requires that these wheels only be run in a single indicated direction. Failure to do so will lead to destruction of the wheel and increased risk of accidents.Technical informationVersionMW (medium-soft)Dia. External6 inWidth1/2 inDrive typeBench grinderGritfineMax. RPM5100Pack qty1
POLINOX® Cross Buff
POLINOX Cross BuffPOLINOX® cross buffs are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive is staggered and stacked around a core and resembles a star. Ideal for hard-to-reach places like drilled holes and indentations. POLINOX® cross buffs are designed for cleaning, deburring and fine grinding of inner surfaces and contours.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External1 inDrive typeFlexible shaft driveGrit80Max. RPM19100Pack qty20
POLINOX® fibre-backing discs, radial construction
POLINOX Fibre-backing discPOLINOX® grinding discs are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive flaps are attached to a fiberglass backer, for face-down finishing work. Densely stacked flaps make the disc durable. The tool is designed for working on large surfaces with variable speed angle grinders.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 1/2 inWidth3/4 inDrive typeAngle grinderGrit100Max. RPM5300Pack qty5
POLINOX® fibre-backing discs, interleaved construction
POLINOX Fibre-backing discPOLINOX® grinding discs are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven and abrasive-cloth flaps are attached to a fiberglass baker, for face-down finishing work on large surfaces. Densely stacked flaps make the disc durable. The tool is designed for working on large surfaces with variable speed angle grinders.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 1/2 inWidth3/4 inDrive typeAngle grinderGrit100Max. RPM5300Pack qty5
POLINOX® finishing drums, radial construction
POLINOX Non-Woven Finishing DrumPOLINOX® finishing drums are designed for work on large surfaces. Made of radially arranged non-woven abrasive flaps. Densely packed flaps make the finishing drums durable.Special featuresLong service life due to tightly packed flaps.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 inWidth4 inDrive typeDrum grindersGrit80Max. RPM4800Pack qty1
POLINOX® finishing drums, corrugated construction
POLINOX Non-Woven Finishing DrumPOLINOX® finishing drums are designed for work on large surfaces. In the corrugated construction design, several wavily arranged strips of non-woven abrasive material are wound around a core. The wavy structure of the non-woven abrasive material creates a seamless matte finish on large surfaces.Special featuresLong service life due to tightly packed flaps.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 inWidth4 inDrive typeDrum grindersGrit100Max. RPM4800Pack qty1
POLINOX® finishing drums, interleaved construction
POLINOX Non-Woven Finishing DrumPOLINOX® finishing drums are designed for work on large surfaces. In the interleaved construction, non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. The flap structure increases stock removal and achieves a coarser surface finish.Special featuresLong service life due to tightly packed flaps.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 inWidth4 inDrive typeDrum grindersGrit60Max. RPM4800Pack qty1
POLINOX® mounted flap wheels, radial construction
POLINOX Mounted Flap WheelPOLINOX® mounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. Non-woven abrasive flaps are arranged radially, and the wheels are durable due to the dense packing of the flaps. Ideal for surface work.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External1 1/2 inWidth3/4 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit80Max. RPM15000Pack qty10
POLINOX® mounted flap wheels, interleaved construction
POLINOX Mounted Flap WheelPOLINOX® mounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. This flap structure improves stock removal and achieves a coarser surface finish.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External1 1/2 inWidth3/4 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit80Max. RPM15000Pack qty10
POLINOX® mounted flap wheels, axial-layered construction
POLINOX Mounted Flap WheelPOLINOX® mounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple (axial) disc layers. Since the individual non-woven discs are not interconnected, the abrasive surface adapts easily to different workpiece contours, e.g. when working on profiles or pipes.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External2 3/8 inWidth2 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit100Max. RPM10000Pack qty10
POLINOX® mounted flap wheels, corrugated construction
POLINOX Mounted Flap WheelPOLINOX® mounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. Several wavily arranged strips of non-woven abrasive material are wound around a core. The wavy structure of the non-woven abrasive material creates a seamless matte finish on surfaces.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 inWidth2 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit100Max. RPM6000Pack qty5
POLINOX® Unitized Disc
POLINOX Unitized DiscPOLINOX® unitized discs are used for face-down grinding with variable speed angle grinders. Ideal for larger surfaces. The compressed, non-woven material is bonded to a fiberglass back. POLINOX® unitized discs are made of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The different combinations of compression, fibers, grain, and the appropriate bond create non-woven products that offer a very good surface finish, high stock removal rate and long tool life. These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing. Medium-hard version with increased edge strength and service life for coarse deburring and cleaning applications.Special featuresCost-effective due to high abrasive performance and durability.Produces very good surface quality.Can be profiled as desired, enabling optimal adjustment to the contour.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useConsiderably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionMH (medium-hard)Dia. External4 1/2 inWidth1/2 inDrive typeAngle grinderGritfineMax. RPM10000Pack qty5
POLINOX® Unitized Wheel
POLINOX Unitized WheelPOLINOX® unitized wheels are made of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. This particular bond results in non-woven products that create very good surface finishes and have high stock removal rate and long service life. These properties come into play especially when deburring, blending, finishing, and polishing soft metals, alloyed and high-alloy steels, as well as titanium alloys. This version for straight grinders, flexible shafts and bench grinders is designed for working on smaller surfaces. Hard version with very high stock removal rate, good edge strength, and long service life for tough deburring and polishing applications.Special featuresCost-effective due to high abrasive performance and durability.Produces very good surface quality.Can be profiled as desired, enabling optimal adjustment to the contour.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useConsiderably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionH (hard)Dia. External2 inWidth1/8 inDrive typeFlexible shaft driveGritfineMax. RPM15300Pack qty10
POLINOX® Unmounted Flap Wheel
POLINOX Unmounted Flap WheelPOLINOX® unmounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. This flap structure improves stock removal and achieves a coarser surface finish.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External6 inWidth2 inDrive typeBench grinderGrit100Max. RPM4000Pack qty1
POLINOX® unmounted flap wheels, radial construction
POLINOX Non-Woven Finishing DrumPOLINOX® unmounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. Non-woven abrasive flaps are arranged radially, and the wheels are durable due to the dense packing of the flaps. Ideal for surface work. The product is designed for working on medium-sized surfaces with speed-adjustable angle grinders and fillet weld grinders, and can be mounted directly onto the drive system's spindle without the need for additional clamping devices.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.Technical informationDia. External4 inWidth2 inDrive typeAngle grinderGrit100Max. RPM6000Pack qty5
POLINOX® unmounted flap wheels, interleaved construction
POLINOX Non-Woven Finishing DrumPOLINOX® unmounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. This flap structure improves stock removal and achieves a coarser surface finish. The product is designed for working on medium-sized surfaces with speed-adjustable angle grinders and fillet weld grinders, and can be mounted directly onto the drive system's spindle without the need for additional clamping devices. This product is mainly used for work on large surfaces.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 inWidth2 inDrive typeAngle grinderGrit100Max. RPM6000Pack qty5