Shop
PFERD CONE, 2" x 3, 5/8-11 Thread
PFERD CONE, 2" x 3, 5/8-11 Thread, 16 Grit, Type 16, Aluminum OxideAbrasive cones and plugs are designed for processing workpieces made of steel, cast steel and cast iron. Cones and plugs are made of regular aluminum oxide in a high-quality resinoid bond. Because of their hardness, these products achieve good stock removal rates and are highly durable.Special featuresHigh stock removal rate.High level of edge and dimensional stability.Cool grinding reduces thermal load on the workpiece.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedStainless steel (INOX)Steel, cast steelCast ironSafetyThe maximum permissible speed is calculated according to standard ANSI B7.1.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External2 inWidth3 inDrive typeAngle grinderGrit16Max. RPM18100Pack qty10
PFERD Dressing Stone, 4-3/4"x 2 x 1-1/4, 30 & 60 Grit, 2 sided, Coarse & Fine, Silicon Carbide
PFERD Dressing Stone, 4-3/4"x 2 x 1-1/4, 30 & 60 Grit, 2 sided, Coarse & Fine, Silicon CarbideDressing stone with two different grit sizes: Upper side (coarse): Profiling and dressing of large mounted points with coarse bonds and grain. Underside (fine): Profiling and dressing of mounted points with fine bonds and grain.ApplicationsCleaningSharpeningMaterials that can be workedAbrasive materialsTechnical informationWidth2 inDrive typeManual applicationGrit30/60Pack qty5
PFERD Dressing Stone, 6" x 1 x 1
PFERD Dressing Stone, 6" x 1 x 1, 30 Grit, Silicon CarbideLarge dressing stone with coarse granulation (grain 30) for profiling and dressing of larger and coarser mounted points.ApplicationsCleaningSharpeningMaterials that can be workedAbrasive materialsTechnical informationWidth1 inDrive typeManual applicationGrit30Pack qty5
PFERD Hole Saw Arbor Adapter for 1-1/4" to 1-1/2" Hole Saws
PFERD offers hole saw adapters. These adapters allow for quick and easy switching between hole saws while using the same arbor. Hole saws 29111 through 29115 can be used with the arbor adapter EDP 29070, a washer, and the hole saw arbor 29033 or 29036.
PFERD Hole Saw Arbor Repair Kit
These service sets from PFERD allow the most common parts to be replaced in case of loss or damage. PFERD offers a replacement parts set for hole saw arbors and a service set for the ALUMASTER High Speed Disc. Using this replacement set, the most common hole saw parts are replaceable in case of loss or damage. This set includes two ejection springs, two hexagon socket head screws, and an hexagon socket wrench
PFERD PLUG, 1-1/2" x 3, 5/8-11 Thread
PFERD PLUG, 1-1/2" x 3, 5/8-11 Thread, 16 Grit, Type 18, Aluminum OxideAbrasive cones and plugs are designed for processing workpieces made of steel, cast steel and cast iron. Cones and plugs are made of regular aluminum oxide in a high-quality resinoid bond. Because of their hardness, these products achieve good stock removal rates and are highly durable.Special featuresHigh stock removal rate.High level of edge and dimensional stability.Cool grinding reduces thermal load on the workpiece.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedStainless steel (INOX)Steel, cast steelCast ironSafetyThe maximum permissible speed is calculated according to standard ANSI B7.1.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External1 1/2 inWidth3 inDrive typeAngle grinderGrit16Max. RPM24100Pack qty10
PFERD PLUG, 2" x 3, 5/8-11 Thread
PFERD PLUG, 2" x 3, 5/8-11 Thread, 16 Grit, Type 18R, Aluminum OxideAbrasive cones and plugs are designed for processing workpieces made of steel, cast steel and cast iron. Cones and plugs are made of regular aluminum oxide in a high-quality resinoid bond. Because of their hardness, these products achieve good stock removal rates and are highly durable.Special featuresHigh stock removal rate.High level of edge and dimensional stability.Cool grinding reduces thermal load on the workpiece.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedStainless steel (INOX)Steel, cast steelCast ironSafetyThe maximum permissible speed is calculated according to standard ANSI B7.1.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External2 inWidth3 inDrive typeAngle grinderGrit16Max. RPM18100Pack qty10
PFERD Quick-Mounting System for Hole Saws
PFERD offers a quick-mounting system for easily and quickly using bi-metal hole saws with all conventional power drills. PFERD offers a clamping system for easily and quickly using bi-metal hole saws. The quick-mounting system and the two three-part adapter sets, which fit the hole saw diameter, enable PFERD bi-metal hole saw to conveniently be used on all conventional power drills.Special featuresQuickly and easily swap different hole saws.After the application is completed, the hole saw and quick-mounting system can be separated without the use of additional tools by simply pressing a button.Quick-mounting system bi-metal hole saw drill.Recommendations for useQuickly and easily screw the adapters into the desired hole saw and clamp them into the quick-mounting system.
PFERD Replacement Spindle for Bench Wheel Hand Dresser Tool
PFERD Replacement Spindle for Bench Wheel Hand Dresser ToolDesigned for use with the PFERD Bench Wheel Hand Dresser Tool, providing a reliable and durable replacement component to maintain optimal performance during dressing and maintenance operations. Built from high-quality materials, it ensures smooth, consistent rotation for efficient cleaning and sharpening of abrasive wheels.ApplicationsCleaningSharpeningMaterials that can be workedAbrasive materialsOtherTechnical informationDia. External2 1/8 inWidth1 1/2 inDrive typeManual applicationPack qty1
PFERD Resin Mounted Point, INOX EDGE, Series A
PFERD Resin Mounted Point, INOX EDGE, 3/4" x 2-1/2, 30 Grit, A1, AO, 1/4" ShankThe INOX EDGE type is ideal for edge grinding on stainless steel (INOX). Applications include weld dressing on fillet welds on stainless steel components, removing burrs on molded parts made of high-temperature-resistant alloys, removing burrs on stainless steel castings, and grinding chamfers in preparation for welding stainless steel profiles. Series A mounted points are generally used on larger, stainless steel components, such as in container construction. Due to the special shapes, it is possible to grind in a variety of contours. Applications include grinding in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.Special featuresIdeal for use on temperature-sensitive materials due to cool-grinding properties.Increased operator comfort due to low vibration grindingCost-effective due to high edge stability, even on low-speed power tools.High dimensional stability on edges.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedStainless steel (INOX)Recommendations for useINOX EDGE mounted points perform best at a peripheral speed of 6,900-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".Technical informationShapeA 1VersionINOX EDGEDia. External3/4 inWidth2 1/2 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit30Pack qty10
PFERD Resin Mounted Point, INOX EDGE, Series W
PFERD Resin Mounted Point, INOX EDGE, 1" x 1, 30 Grit, W220, Aluminum Oxide, 1/4" ShankThe INOX EDGE type is ideal for edge grinding on stainless steel (INOX). Applications include weld dressing on fillet welds on stainless steel components, removing burrs on molded parts made of high-temperature-resistant alloys, removing burrs on stainless steel castings, and grinding chamfers in preparation for welding stainless steel profiles. The cylindrical shape is ideal for grinding bores, radii and contours.Special featuresIdeal for use on temperature-sensitive materials due to cool-grinding properties.Increased operator comfort due to low vibration grindingCost-effective due to high edge stability, even on low-speed power tools.High dimensional stability on edges.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedStainless steel (INOX)Recommendations for useINOX EDGE mounted points perform best at a peripheral speed of 6,900-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".Technical informationShapeW 220VersionINOX EDGEDia. External1 inWidth1 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit30Pack qty10
PFERD Resin Mounted Point, INOX, Series A
PFERD Resin Mounted Point, INOX, 3/4" x 2-1/2, 30 Grit, A1, Aluminum Oxide, 1/4" ShankThe INOX type is specifically designed for surface work on stainless steel (INOX) and for universal use on non-ferrous metals and bronze. These products are used for rough grinding of stainless steel (INOX) castings and grinding of molded parts made of high temperature-resistant alloys. Series A mounted points are generally used on larger, stainless steel components, such as in container construction. Due to the special shapes, it is possible to grind in a variety of contours. Applications include grinding in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.Special featuresIdeal for use on temperature-sensitive materials due to cool-grinding properties.Increased operator comfort due to low vibration grindingApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedStainless steel (INOX)BronzeHard non-ferrous metalRecommendations for useINOX mounted points perform best at a peripheral speed of 6,900-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".Technical informationShapeA 1VersionINOXDia. External3/4 inWidth2 1/2 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit30Pack qty10
PFERD Resin Mounted Point, INOX, Series W
PFERD Resin Mounted Point, INOX, 1" x 2, 30 Grit, W222, Aluminum Oxide, 1/4" ShankThe INOX type is specifically designed for surface work on stainless steel (INOX) and for universal use on non-ferrous metals and bronze. These products are used for rough grinding of stainless steel (INOX) castings and grinding of molded parts made of high temperature-resistant alloys. The cylindrical shape is ideal for grinding bores, radii and contours.Special featuresIdeal for use on temperature-sensitive materials due to cool-grinding properties.Increased operator comfort due to low vibration grindingApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedStainless steel (INOX)BronzeHard non-ferrous metalRecommendations for useINOX mounted points perform best at a peripheral speed of 6,900-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".Technical informationShapeW 222VersionINOXDia. External1 inWidth2 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit30Pack qty10
PFERD Telescoping Bench Wheel Bushing, 1/2" thick for reducing 1" arbor to 3/4, 5/8, 1/2
PFERD Telescoping Bench Wheel Bushing, 1/2" thick for reducing 1" arbor to 3/4, 5/8, 1/2PFERD bench grinder bushings provide a safe method of reducing the wheel arbor to accommodate various spindle sizes. The bushing should be flush on both sides of the wheel, and should not interfere with the flanges.Technical informationDrive typeBench grinderPack qty1
PIC... Badger | Xtreme Flap Disc | Zirconia | HIGH DENSTIY | Type 27
Premium Zirconia X weight Poly/Cotton blend. Most preferred material for flap discs worldwide. This zirconia is a self sharpening grain offering continuous rate of cut and longevity. Ideally suited for all general grinding and blending of most materials.
PIC... Badger | Xtreme Flap Disc | Zirconia | STANDARD DENSITY | Type 27
Premium Zirconia X weight Poly/Cotton blend. Most preferred material for flap discs worldwide. This zirconia is a self sharpening grain offering continuous rate of cut and longevity. Ideally suited for all general grinding and blending of most materials.
PIC...Pearl Abrasives | Flap Disc | Exv MaxiDisc | Zirconia | STANDARD DENSITY | Type 29
Pearl’s new EXV™ Zirconia Maxidisc™ is an ideal combination of performance and value. It is engineered with zirconia grains on a heavy duty coated abrasive cloth. The EXV™ Maxidisc™ is designed for grinding, blending and finishing on a wide range of metal and stainless steel applications. Excellent price + Performance value! Medium to heavy stock removal on metals Blending and intermediate finishing of metal surfaces Weld bead removal Paint removal Base preparation for steel frame structures Deburring and corner removal Grinding, blending and finishing of stainless steel APPLICATIONS: For Metal and Stainless Steel. 10 pcs per box WARNING: This product can expose you to chemicals including Titanium Dioxide and Bisphenol, which is known to the State of California to cause cancer and birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Plastic bushing reducer ring
Technical informationDiameter1 1/2 InchWall thickness3/16 InchPack qty1PFERD bench grinder bushings provide a safe method of reducing the wheel arbor to accommodate various spindle sizes. The bushing should be flush on both sides of the wheel, and should not interfere with the flanges.AdvantagesFlexible adjustment to the prerequisites of the drive system.Stop collar, to prevent the ring from pushing through the center hole of the cut-off wheel.SafetyEnsure that the flanges on the drive system are backed off in order to mount the wheel securely.
Plastic handles
Technical informationPFERD Plastic File Handle for 8-10" FilesItem number12616111EDP no.11132Length4.25 InchPFERD TOOLS typePH 11Packaging unit10 EACHPFERD offers file handles in different versions and dimensions. From wooden handles for chain saw files to ergonomic file handles for machinist's files, sharpening files or rasps, to quick-mounting handles for needle files or precision files, PFERD has handles for a wide variety of files. Plastic file handles for good guidance and force transmission.Special featuresWide collar reduces fatigue and increases safety.Handle structure allows for good force transmission and file control.Air chambers reduce hand moisture.Made from sturdy plastic.Made without plasticizers.Compatible power toolsManual application
Pneumatic Drum for 15-1/2" x 3-1/2 Belts
Pneumatic Drum for 15-1/2" x 3-1/2 BeltsThe pneumatic grinding drum is suitable for short belts with a width of 100 mm and a length of 282 mm. The rubber tube yields with increased contact pressure, which is why the abrasive belt adapts very well to the surface to be machined and the contact area increases.Technical informationDia. External5 inWidth3 1/2 inDrive typeDrum grindersMax. RPM3800Pack qty1
POLICAP® abrasive caps, cylindrical with radius end, shape WRC
POLICAP Seamless Abrasive CapPOLICAP® abrasive caps in cylindrical shape with radius end, shape C). POLICAP® products have a seamless design and the entire surface area can be used. For universal use on steel workpieces (hardened, heat-treated, non-hardened). Specifically developed for special applications, e.g. in tool and die-making and repair. Also works on plastics, wood and fillers in model crafting. Color code for grit size 60 = brownSpecial featuresAbrasive caps and cones fit securely on the holder as it expands during use.Consistent shape accuracy and excellent fine grinding due to special manufacturing.Easy product change.ApplicationsStep-by-step fine grindingLevelingSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast steelHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useTo easily change the abrasive caps and cones, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder clamped in the power tool, and fix in place.For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.SafetyThe maximum permitted peripheral speed is 5,500 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External9/32 inDrive typeFlexible shaft driveGrit60Pack qty50
POLICAP® abrasive caps, cylindrical with pointed cone end, shape WKG
POLICAP Seamless Abrasive CapPOLICAP® abrasive caps in tapered conical shape with radius end, shape G. The taper angle of the cone is 30°. POLICAP® products have a seamless design and the entire surface area can be used. For universal use on steel workpieces (hardened, heat-treated, non-hardened). Specifically developed for special applications, e.g. in tool and die-making and repair. Also works on plastics, wood and fillers in model crafting. Color code for grit size 60 = brownSpecial featuresAbrasive caps and cones fit securely on the holder as it expands during use.Consistent shape accuracy and excellent fine grinding due to special manufacturing.Easy product change.ApplicationsStep-by-step fine grindingLevelingSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast steelHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useTo easily change the abrasive caps and cones, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder clamped in the power tool, and fix in place.For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.SafetyThe maximum permitted peripheral speed is 5,500 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External9/32 inDrive typeFlexible shaft driveGrit60Pack qty50
POLICAP® abrasive caps, cylindrical, shape A
POLICAP Seamless Abrasive CapPOLICAP® abrasive caps in cylindrical shape, shape A. POLICAP® products have a seamless design and the entire surface area can be used. For universal use on steel workpieces (hardened, heat-treated, non-hardened). Specifically developed for special applications, e.g. in tool and die-making and repair. Also works on plastics, wood and fillers in model crafting. Color code for grit size 60 = brownSpecial featuresAbrasive caps and cones fit securely on the holder as it expands during use.Consistent shape accuracy and excellent fine grinding due to special manufacturing.Easy product change.ApplicationsStep-by-step fine grindingLevelingSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast steelHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useTo easily change the abrasive caps and cones, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder clamped in the power tool, and fix in place.For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.SafetyThe maximum permitted peripheral speed is 5,500 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External9/32 inDrive typeFlexible shaft driveGrit60Pack qty50
POLICAP® abrasive caps, tapered with radius end, shape KEL
POLICAP Seamless Abrasive CapPOLICAP® abrasive caps in conical shape with radius end, shape L. POLICAP® products have a seamless design and the entire surface area can be used. For universal use on steel workpieces (hardened, heat-treated, non-hardened). Specifically developed for special applications, e.g. in tool and die-making and repair. Also works on plastics, wood and fillers in model crafting. Color code for grit size 60 = brownSpecial featuresAbrasive caps and cones fit securely on the holder as it expands during use.Consistent shape accuracy and excellent fine grinding due to special manufacturing.Easy product change.ApplicationsStep-by-step fine grindingLevelingSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast steelHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useTo easily change the abrasive caps and cones, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder clamped in the power tool, and fix in place.For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.SafetyThe maximum permitted peripheral speed is 5,500 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External7/16 inDrive typeFlexible shaft driveGrit60Pack qty50