POLINOX® fibre-backing discs, 4 1/2 x 3/4", 280 Grit
PFERD TOOLS
$0.00
Product number:
44692260
Product information "POLINOX® fibre-backing discs, 4 1/2 x 3/4", 280 Grit"
Technical information
4 1/2 x 3/4", 280 Grit
| Dia. External | 4 1/2 in |
| Width | 3/4 in |
| Drive type | Angle grinder |
| Grit | 280 |
| Max. RPM | 5300 |
| Pack qty | 5 |
POLINOX® grinding discs are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive flaps are attached to a fiberglass backer, for face-down finishing work. Densely stacked flaps make the disc durable. The tool is designed for working on large surfaces with variable speed angle grinders.
Special features
- Conforms to contours due to high flexibility.
- Cool grinding and low thermal load on the workpiece.
- The open structure and high flexibility of the non-woven material prevents loading.
Applications
- Cleaning
- Deburring
- Step-by-step fine grinding
- Roughening
- Structuring (matt finishing, brush matting and satin finishing)
- Surface work
Materials that can be worked
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Zinc
- Aluminum
- Brass
- Bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Hardened, heat-treated steels over 370 HV (38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
Recommendations for use
- For the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.
Safety
- The maximum permitted peripheral speed is 6,300 SFPM.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
| Pack Qty: | 5 |
|---|
Login
No reviews found. Share your insights with others.