Universal cut KZW 3
Tungsten carbide burs for robotics, KZW Shape, 1/2" x 1" x 1/4" Shank
Single cut burs are ideal for machining cast iron, steel, stainless steel (INOX), nickel-based alloys, and titanium alloys. These burs have a high stock removal rate and achieve a good surface finish quality. Special bur shape for robot applications. The combination of various bur shapes enables hard-to-reach components to be deburred and chamfered in just one operation.Special featuresLess programming needed due to fewer product changes.High-quality HICOAT® coating for a longer tool life and improved performance.Ideal surface finish.High surface quality.Work on almost all materials up to 940 HV (68 HRC).Workpiece materialsAnnealed cast ironBlack annealed cast iron (GTS, GJMB)BrassBronzeCase-hardened steelsCast ironCast steelCobalt-based alloysCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hard aluminium alloysHard non-ferrous metalHardened, heat-treated steels over 370 HV (38 HRC)High-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Stainless steel (INOX)SteelSteel, cast steelSteels over 220 HV (> 95 HB)Steels up to 220 HV (< 95 HB)Steels up to 370 HV (< 38 HRC)TitaniumTitanium alloysTool steelsWhite annealed cast iron (GTW, GJMW)ApplicationsCutting out holesDeburringLevelingMillingSurface workWorking on edgesWorking on edges (chamfering, rounding)Compatible power toolsRobotStraight grinder
Tungsten carbide burs for robotics, KZW Shape, 1/4" x 1/2" x 1/8" Shank
Single cut burs are ideal for machining cast iron, steel, stainless steel (INOX), nickel-based alloys, and titanium alloys. These burs have a high stock removal rate and achieve a good surface finish quality. Special bur shape for robot applications. The combination of various bur shapes enables hard-to-reach components to be deburred and chamfered in just one operation.Special featuresLess programming needed due to fewer product changes.High-quality HICOAT® coating for a longer tool life and improved performance.Ideal surface finish.High surface quality.Work on almost all materials up to 940 HV (68 HRC).Workpiece materialsAnnealed cast ironBlack annealed cast iron (GTS, GJMB)BrassBronzeCase-hardened steelsCast ironCast steelCobalt-based alloysCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hard aluminium alloysHard non-ferrous metalHardened, heat-treated steels over 370 HV (38 HRC)High-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Stainless steel (INOX)SteelSteel, cast steelSteels over 220 HV (> 95 HB)Steels up to 220 HV (< 95 HB)Steels up to 370 HV (< 38 HRC)TitaniumTitanium alloysTool steelsWhite annealed cast iron (GTW, GJMW)ApplicationsCutting out holesDeburringLevelingMillingSurface workWorking on edgesWorking on edges (chamfering, rounding)Compatible power toolsRobotStraight grinder