Double cut with HICOAT® coating HC-FEP
Tungsten carbide burs for versatile use, Double cut, HI-COAT FEP, 14° Taper bur with radius end – Shape L
Double cut burs with HICOAT® coating HC-FEP have a high hardness and wear resistance. The coating enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer service life and use at higher peripheral speeds compared to uncoated burs. 14° Taper bur with round radius end, shape L.Special featuresThe highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.Recommendations for useThe smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.Workpiece materialsAnnealed cast ironBlack annealed cast iron (GTS, GJMB)Case-hardened steelsCast ironCast steelCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Hard aluminium alloysHardened, heat-treated steels over 370 HV (38 HRC)High-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Stainless steel (INOX)SteelSteel, cast steelSteels over 220 HV (> 95 HB)Steels up to 220 HV (< 95 HB)Steels up to 370 HV (< 38 HRC)Tool steelsWhite annealed cast iron (GTW, GJMW)ApplicationsCutting out holesDeburringLevelingMillingMilling outSurface workWork on weld seamsCompatible power toolsFlexible shaft driveTool machineRobotStationary machinesStraight grinder
Tungsten carbide burs for versatile use, Double cut, HI-COAT FEP, Ball bur – Shape D
Double cut burs with HICOAT® coating HC-FEP have a high hardness and wear resistance. The coating enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer service life and use at higher peripheral speeds compared to uncoated burs. Ball-shaped bur, shape D.Special featuresThe highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.Recommendations for useFor the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.Workpiece materialsAnnealed cast ironBlack annealed cast iron (GTS, GJMB)Case-hardened steelsCast ironCast steelCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Hard aluminium alloysHardened, heat-treated steels over 370 HV (38 HRC)High-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Stainless steel (INOX)SteelSteel, cast steelSteels over 220 HV (> 95 HB)Steels up to 220 HV (< 95 HB)Steels up to 370 HV (< 38 HRC)Tool steelsWhite annealed cast iron (GTW, GJMW)ApplicationsCutting out holesDeburringLevelingMillingMilling outSurface workWork on weld seamsCompatible power toolsFlexible shaft driveTool machineRobotStationary machinesStraight grinder
Tungsten carbide burs for versatile use, Double cut, HI-COAT FEP, Cylindrical bur with end cut – Shape B
Double cut burs with HICOAT® coating HC-FEP have a high hardness and wear resistance. The coating enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer service life and use at higher peripheral speeds compared to uncoated burs. Cylindrical burSpecial featuresThe highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.Recommendations for useFor the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.Workpiece materialsAnnealed cast ironBlack annealed cast iron (GTS, GJMB)Case-hardened steelsCast ironCast steelCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Hard aluminium alloysHardened, heat-treated steels over 370 HV (38 HRC)High-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Stainless steel (INOX)SteelSteel, cast steelSteels over 220 HV (> 95 HB)Steels up to 220 HV (< 95 HB)Steels up to 370 HV (< 38 HRC)Tool steelsWhite annealed cast iron (GTW, GJMW)ApplicationsCutting out holesDeburringLevelingMillingMilling outSurface workWork on weld seamsCompatible power toolsFlexible shaft driveTool machineRobotStationary machinesStraight grinder
Tungsten carbide burs for versatile use, Double cut, HI-COAT FEP, Cylindrical bur with plain end (uncut) – Shape A
Double cut burs with HICOAT® coating HC-FEP have a high hardness and wear resistance. The coating enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer service life and use at higher peripheral speeds compared to uncoated burs. Cylindrical burSpecial featuresThe highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.Recommendations for useFor the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.Workpiece materialsAnnealed cast ironBlack annealed cast iron (GTS, GJMB)Case-hardened steelsCast ironCast steelCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Hard aluminium alloysHardened, heat-treated steels over 370 HV (38 HRC)High-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Stainless steel (INOX)SteelSteel, cast steelSteels over 220 HV (> 95 HB)Steels up to 220 HV (< 95 HB)Steels up to 370 HV (< 38 HRC)Tool steelsWhite annealed cast iron (GTW, GJMW)ApplicationsCutting out holesDeburringLevelingMillingMilling outSurface workWork on weld seamsCompatible power toolsFlexible shaft driveTool machineRobotStationary machinesStraight grinder
Tungsten carbide burs for versatile use, Double cut, HI-COAT FEP, Cylindrical bur with radius end – Shape C
Double cut burs with HICOAT® coating HC-FEP have a high hardness and wear resistance. The coating enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer service life and use at higher peripheral speeds compared to uncoated burs. Cylindrical bur with rounded radius end, shape C.Special featuresThe highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.Recommendations for useFor the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.Workpiece materialsAnnealed cast ironBlack annealed cast iron (GTS, GJMB)Case-hardened steelsCast ironCast steelCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Hard aluminium alloysHardened, heat-treated steels over 370 HV (38 HRC)High-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Stainless steel (INOX)SteelSteel, cast steelSteels over 220 HV (> 95 HB)Steels up to 220 HV (< 95 HB)Steels up to 370 HV (< 38 HRC)Tool steelsWhite annealed cast iron (GTW, GJMW)ApplicationsCutting out holesDeburringLevelingMillingMilling outSurface workWork on weld seamsCompatible power toolsFlexible shaft driveTool machineRobotStationary machinesStraight grinder
Tungsten carbide burs for versatile use, Double cut, HI-COAT FEP, Tree bur with radius end – Shape F
Double cut burs with HICOAT® coating HC-FEP have a high hardness and wear resistance. The coating enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer service life and use at higher peripheral speeds compared to uncoated burs. Tree bur with radius end, shape F.Special featuresThe highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.Recommendations for useThe smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.Workpiece materialsAnnealed cast ironBlack annealed cast iron (GTS, GJMB)Case-hardened steelsCast ironCast steelCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Hard aluminium alloysHardened, heat-treated steels over 370 HV (38 HRC)High-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Stainless steel (INOX)SteelSteel, cast steelSteels over 220 HV (> 95 HB)Steels up to 220 HV (< 95 HB)Steels up to 370 HV (< 38 HRC)Tool steelsWhite annealed cast iron (GTW, GJMW)ApplicationsCutting out holesDeburringLevelingMillingMilling outSurface workWork on weld seamsCompatible power toolsFlexible shaft driveTool machineRobotStationary machinesStraight grinder