Standard Twist Knot Wire Wheel Brush, 4 Inch / Steel wire (ST)
$0.00
Product information "Standard Twist Knot Wire Wheel Brush, 4 Inch / Steel wire (ST)"
Technical information
4 Inch / Steel wire (ST)
| Brush Diameter | 4 Inch |
| Filament Material | Steel wire (ST) |
| Wire Diameter | 0.014 Inch |
| Thread / Arbor | 5/8-11 |
| Trim Length | 7/8 Inch |
| Number of Knots | 22 |
| Max. RPM | 20000 RPM |
| Pack Qty | 10 |
The brush knots are knotted to 75% of the length. The brush is designed for brushing large areas and for heavy-duty brushwork, such as deburring, cleaning, derusting and descaling, as well as removing spatter. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. Steel wire is temperature-resistant up to 600°F.
Advantages
- Optimal ratio of aggressiveness and flexibility.
- Long service life through use of PFERD special wire.
Applications
- Cleaning
- Deburring
- Derusting
- Descaling
- Removing oxide layers
- Paint stripping
- Root seam processing
- Work on weld seams
- Work on fillet welds
Materials that can be worked
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Cast iron
- Cast steel
Drive Types
- Angle grinder
| Drive Type: | Angle grinder |
|---|---|
| Filament Material: | Steel wire (ST) |
| Max. RPM: | 20000 RPM |
| Mounting System: | 5/8-11 |
| Pack Qty: | 10 |
| Trim Length: | 7/8 Inch |
| Wire Diameter: | 0.014 Inch |
Login