Poliflex Mounted Point, 1/4 x 3/8", Shape W 162, 120 Grit, 1/8" shank
$0.00
Product information "Poliflex Mounted Point, 1/4 x 3/8", Shape W 162, 120 Grit, 1/8" shank"
Technical information
1/4 x 3/8", Shape W 162, 120 Grit, 1/8" shank
| Shape | W 162 |
| Bond | LR |
| Dia. External | 1/4 in |
| Width | 3/8 in |
| Dia. shank | 1/8 Inch |
| Drive type | Flexible shaft drive |
| Grit | 120 |
| Max. RPM | 67210 |
| Pack qty | 10 |
Poliflex® fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances. They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and die-making applications. Poliflex® finishing points with the leather bond are manufactured with white aluminum oxide. The leather (LR) bond is a hard, sturdy bond. Ideal for use on surfaces. Cylindrical finishing point, for fine grinding of small surfaces.
Special features
- Produces a fine, shiny surface finish.
- Produces very good surface quality.
- Cost-effective due to durability and high stock removal rate.
- Highly convenient to use due to precise concentricity.
Applications
- Step-by-step fine grinding
Materials that can be worked
- Steel materials with a hardness > 54 HRC
- Titanium
- Titanium alloys
- Aluminum
- Brass
- Bronze
- Cobalt-based alloys
- Copper
- Hardened, heat-treated steels over 370 HV (38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
Recommendations for use
- Depending on the intended use, profile using a dressing diamond or ceramic dressing stone at a low rotational speed.
- For best performance, use at a recommended peripheral speed of 3,000-4,000 SFPM.
Safety
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
- The clamping length of the shank must be at least 1/2".
| Pack Qty: | 10 |
|---|
Login