POLIVLIES® flap discs, 4 1/2 x 3/4", CO-COOL 60 / A 100 G Grit
$0.00
Product information "POLIVLIES® flap discs, 4 1/2 x 3/4", CO-COOL 60 / A 100 G Grit"
Technical information
4 1/2 x 3/4", CO-COOL 60 / A 100 G Grit
| Dia. External | 4 1/2 in |
| Width | 3/4 in |
| Drive type | Angle grinder |
| Grit | CO-COOL 60 / A 100 G |
| Max. RPM | 13300 |
| Pack qty | 5 |
For aggressive grinding with maximum stock removal rate on hard materials that do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding. These are ideal for large stainless steel (INOX) surfaces. POLIVLIES® grit size 100 G = coarse (yellow-brown)
Special features
- Cost-effective due to high abrasive performance and durability.
- Creates a consistently high surface quality throughout the entire service life, as new sharp abrasive material is constantly exposed.
- Conforms to contours due to high flexibility.
Applications
- Cleaning
- Deburring
- Step-by-step fine grinding
- Roughening
- Structuring (matt finishing, brush matting and satin finishing)
- Surface work
- Work on weld seams
Materials that can be worked
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Zinc
- Aluminum
- Brass
- Bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Hardened, heat-treated steels over 370 HV (38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
Recommendations for use
- For the best performance, use with a recommended peripheral speed of 6,000-7,000 SFPM.
Safety
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
| Pack Qty: | 5 |
|---|
Login