POLICAP® abrasive caps, 1/2" Dia, 80 Grit, 42302136
$0.00
Product information "POLICAP® abrasive caps, 1/2" Dia, 80 Grit, 42302136"
Technical information
1/2" Dia, 80 Grit
| Dia. External | 1/2 in |
| Drive type | Flexible shaft drive |
| Grit | 80 |
| Pack qty | 50 |
POLICAP® abrasive caps in cylindrical shape with radius end, shape C). POLICAP® products have a seamless design and the entire surface area can be used. The specific structure of the ceramic oxide grain and the active-grinding bond components make this ideal for work on stainless steels (INOX) and the high-temperature-resistant nickelbased and cobalt-based alloys that are frequently used in turbine construction, e.g. INCONEL, HASTELLOY. The active grinding additives prevent loading and facilitate cooler grinding with considerably higher stock removal rate. Color code for ceramic oxide grain CO-COOL = red
Special features
- Abrasive caps and cones fit securely on the holder as it expands during use.
- Consistent shape accuracy and excellent fine grinding due to special manufacturing.
- Easy product change.
Applications
- Step-by-step fine grinding
- Leveling
- Surface work
Materials that can be worked
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Annealed cast iron
- Bronze
- Cobalt-based alloys
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Hardened, heat-treated steels over 370 HV (38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
Recommendations for use
- To easily change the abrasive caps and cones, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder clamped in the power tool, and fix in place.
- For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.
Safety
- The maximum permitted peripheral speed is 5,500 SFPM.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
| Pack Qty: | 50 |
|---|
Login