Mounted Knot Wire Wheel Brush PSF, 4 Inch
$0.00
Product information "Mounted Knot Wire Wheel Brush PSF, 4 Inch"
Technical information
4 Inch
| Brush Diameter | 4 Inch |
| Filament Material | Steel wire (ST) |
| Wire Diameter | 0.012 Inch |
| Shank Diameter | 1/4 Inch |
| Trim Length | 7/8 Inch |
| Max. RPM | 20000 RPM |
| Pack Qty | 5 |
Aggressive brush for cleaning, derusting and work on weld seams. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. Steel wire is temperature-resistant up to 600°F.
Advantages
- Optimal access to hard-to-reach areas such as grooves and recesses.
- Packaged for retail.
- Aggressive brushing action due to tightly-twisted wire knots.
- Long service life through use of PFERD special wire.
- Proudly made in the USA and built to high standards for quality and reliability
Applications
- Cleaning
- Deburring
- Derusting
- Descaling
- Removing oxide layers
- Paint stripping
- Root seam processing
- Work on weld seams
- Work on fillet welds
Materials that can be worked
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Cast iron
- Cast steel
Drive Types
- Flexible shaft drive
- Power drill
- Straight grinder
Safety
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
| Drive Type: | Flexible shaft drive, Power drill, Straight grinder |
|---|---|
| Filament Material: | Steel wire (ST) |
| Max. RPM: | 20000 RPM |
| Pack Qty: | 5 |
| Trim Length: | 7/8 Inch |
| Wire Diameter: | 0.012 Inch |
Login