M-BRAD® Mounted Wheel Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank
$0.00
Product information "M-BRAD® Mounted Wheel Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank"
Technical information
M-BRAD® Mounted Wheel Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank
| Brush Diameter | 3 Inch |
| Filament Material | Silicon carbide (SiC) |
| Wire Diameter | 0.04 Inch |
| Grit Size | 120 |
| Shank Diameter | 1/4 Inch |
| Trim Length | 3/4 Inch |
| Max. RPM | 4500 RPM |
| Pack Qty | 5 |
Designed for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Specially developed for use with low rotational speeds on cordless drills and power drills. Silicon carbide (SiC) filament brushes are designed for deburring work and surface improvement. Plastic filaments are temperature-resistant up to 410°F.
Advantages
- Highly flexible, enabling optimal adaptation to the workpiece contour.
- Packaged for retail.
- Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Applications
- Cleaning
- Deburring
- Roughening
- Structuring (matt finishing, brush matting and satin finishing)
Materials that can be worked
- Stainless steel (INOX)
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Thermoplastics
- Wood
- Aluminum
- Bronze
- Cast iron
- Cast steel
Drive Types
- Flexible shaft drive
- Power drill
- Straight grinder
Safety
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
| Brush Diameter: | 3 Inch |
|---|---|
| Drive Type: | Flexible shaft drive, Power drill, Straight grinder |
| Filament Material: | Silicon carbide (SiC) |
| Grit Size: | 120 |
| Max. RPM: | 4500 RPM |
| Pack Qty: | 5 |
| Trim Length: | 3/4 Inch |
| Wire Diameter: | 0.04 Inch |
Login