M-BRAD® End Brush - Banded, 1 Inch / Ceramic oxide grain (CO)
$0.00
Product information "M-BRAD® End Brush - Banded, 1 Inch / Ceramic oxide grain (CO)"
Technical information
1 Inch / Ceramic oxide grain (CO)
| Brush Diameter | 1 Inch |
| Filament Material | Ceramic oxide grain (CO) |
| Wire Diameter | 0.04 Inch |
| Grit Size | 80 |
| Shank Diameter | 1/4 Inch |
| Trim Length | 1 Inch |
| Max. RPM | 20000 RPM |
| Pack Qty | 10 |
Designed for light brushing such as deburring, cleaning and derusting. Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness. For high stock removal and aggressive brushing action. Plastic filaments are temperature-resistant up to 410°F.
Advantages
- The bridle prevents the wires spreading out sideways.
- The bridle enables the spreading out and flexibility of the brush filament to be strictly controlled.
- Optimal access to hard-to-reach areas such as recesses and drilled holes.
- If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behavior.
- Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Applications
- Cleaning
- Deburring
- Structuring (matt finishing, brush matting and satin finishing)
Materials that can be worked
- Soft titanium alloys (tensile strength 500 N/mm²)
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Titanium
- Titanium alloys
- Aluminum
- Bronze
- Cast iron
- Cast steel
Drive Types
- Flexible shaft drive
- Power drill
- Straight grinder
Safety
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
| Drive Type: | Flexible shaft drive, Power drill, Straight grinder |
|---|---|
| Filament Material: | Ceramic oxide grain (CO) |
| Grit Size: | 80 |
| Max. RPM: | 20000 RPM |
| Pack Qty: | 10 |
| Trim Length: | 1 Inch |
| Wire Diameter: | 0.04 Inch |
Login