Encapsulated Crimped Wire Wheel Brush 2" Dia. .020 Carbon Steel 1/4" Shank
$0.00
Product information "Encapsulated Crimped Wire Wheel Brush 2" Dia. .020 Carbon Steel 1/4" Shank"
Technical information
Encapsulated Crimped Wire Wheel Brush 2" Dia. .020 Carbon Steel 1/4" Shank
| Brush Diameter | 2 Inch |
| Filament Material | Steel wire (ST) |
| Wire Diameter | 0.02 Inch |
| Shank Diameter | 1/4 Inch |
| Trim Length | 7/16 Inch |
| Max. RPM | 17000 RPM |
| Pack Qty | 150 |
Extremely aggressive brushing action, ideal for heavy-duty brushing. Wire is bonded in a synthetic elastomer material which firmly supports the wire filaments, providing precisely controlled brush face, longer brush life and very aggressive removal rates. Limited flexibility. Brushes with encapsulated steel wire are available in different hardness grades. For general use. Aggressive enough for most applications. This brush is made with brass-plated steel wire. Color: green.
Advantages
- Maximum service life as premature wire breakage is prevented.
- Precise handling due to high dimensional stability.
- Ideal for cleaning narrow or hard-to-reach areas such as grooves, fillets, and inside edges.
Applications
- Cleaning
- Deburring
- Derusting
- Descaling
- Removing oxide layers
- Paint stripping
- Root seam processing
- Work on weld seams
- Work on fillet welds
Materials that can be worked
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Cast iron
- Cast steel
Drive Types
- Flexible shaft drive
- Power drill
- Straight grinder
Safety
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
| Brush Diameter: | 2 Inch |
|---|---|
| Drive Type: | Flexible shaft drive, Power drill, Straight grinder |
| Filament Material: | Steel wire (ST) |
| Max. RPM: | 17000 RPM |
| Pack Qty: | 150 |
| Trim Length: | 7/16 Inch |
| Wire Diameter: | 0.02 Inch |
Login