Encapsulated Crimped Wire End Brush, 1 Inch
$0.00
Product information "Encapsulated Crimped Wire End Brush, 1 Inch"
Technical information
1 Inch
| Brush Diameter | 1 Inch |
| Filament Material | Steel wire (ST) |
| Wire Diameter | 0.01 Inch |
| Shank Diameter | 1/4 Inch |
| Trim Length | 7/8 Inch |
| Max. RPM | 13000 RPM |
| Pack Qty | 10 |
Extremely aggressive brushing action, ideal for heavy-duty brushing. Wire is bonded in a synthetic elastomer material which firmly supports the wire filaments, providing precisely controlled brush face, longer brush life and very aggressive removal rates. Limited flexibility. Brushes with encapsulated steel wire are available in different hardness grades. Designed for extremely aggressive use and high heat-resistance. Color: black
Advantages
- Precise handling due to high dimensional stability.
- Maximum service life as premature wire breakage is prevented.
Applications
- Cleaning
- Deburring
- Derusting
- Descaling
- Removing oxide layers
- Paint stripping
- Root seam processing
- Work on weld seams
- Work on fillet welds
Materials that can be worked
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Cast iron
- Cast steel
Drive Types
- Flexible shaft drive
- Power drill
- Straight grinder
Safety
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
| Drive Type: | Flexible shaft drive, Power drill, Straight grinder |
|---|---|
| Filament Material: | Steel wire (ST) |
| Max. RPM: | 13000 RPM |
| Pack Qty: | 10 |
| Trim Length: | 7/8 Inch |
| Wire Diameter: | 0.01 Inch |
Login