Crimped Wire Wheel Brush, 6 Inch / Stainless steel wire (INOX), 79181159
$0.00
Product information "Crimped Wire Wheel Brush, 6 Inch / Stainless steel wire (INOX), 79181159"
Technical information
6 Inch / Stainless steel wire (INOX), 79181159
| Brush Diameter | 6 Inch |
| Face Width | 13/16 Inch |
| Filament Material | Stainless steel wire (INOX) |
| Wire Diameter | 0.01 Inch |
| Arbor Hole | 1 1/4 Inch |
| Trim Length | 1 1/8 Inch |
| Max. RPM | 6000 RPM |
| Pack Qty | 1 |
Excellent for medium-duty hand-held or automated brushing of large workpieces. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F. Developed specially for industrial use.
Advantages
- Durability makes this cost-effective.
- The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved.
- Can be used with all common stationary drive systems and bench grinders.
- Highly flexible, enabling optimal adaptation to the workpiece contour.
- Very corrosion-resistant.
- Creates fine surfaces.
Applications
- Cleaning
- Deburring
- Derusting
- Removing heat discolouration
- Removing oxide layers
- Paint stripping
- Roughening
Materials that can be worked
- Soft titanium alloys (tensile strength 500 N/mm²)
- Stainless steel (INOX)
- Titanium
- Titanium alloys
- Aluminum
- Bronze
- Cobalt-based alloys
- Hard non-ferrous metal
- High-temperature-resistant materials
- Nickel-based alloys (e.g. Inconell and Hastelloy)
Drive Types
- Bench grinder
| Arbor Hole Dia.: | 1 1/4 Inch |
|---|---|
| Drive Type: | Bench grinder |
| Filament Material: | Stainless steel wire (INOX) |
| Max. RPM: | 6000 RPM |
| Pack Qty: | 1 |
| Trim Length: | 1 1/8 Inch |
| Wire Diameter: | 0.01 Inch |
Login