Crimped Wire Bevel Brush, 4 1/2 Inch / Stainless steel wire (INOX)
$0.00
Product information "Crimped Wire Bevel Brush, 4 1/2 Inch / Stainless steel wire (INOX)"
Technical information
4 1/2 Inch / Stainless steel wire (INOX)
| Brush Diameter | 4 1/2 Inch |
| Filament Material | Stainless steel wire (INOX) |
| Wire Diameter | 0.014 Inch |
| Thread / Arbor | 5/8-11 |
| Trim Length | 1 1/8 Inch |
| Max. RPM | 12500 RPM |
| Pack Qty | 5 |
Excellent for medium-duty brushing such as deburring, cleaning, and derusting. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.
Advantages
- Designed for use on angle grinders up to 15,800 SFPM.
- Highly flexible, enabling optimal adaptation to the workpiece contour.
- Ideal for cleaning narrow or hard-to-reach areas such as grooves, fillets, and inside edges.
- Very corrosion-resistant.
- Creates fine surfaces.
Applications
- Cleaning
- Deburring
- Derusting
- Removing heat discolouration
- Removing oxide layers
- Paint stripping
- Roughening
Materials that can be worked
- Soft titanium alloys (tensile strength 500 N/mm²)
- Stainless steel (INOX)
- Titanium
- Titanium alloys
- Aluminum
- Bronze
- Cobalt-based alloys
- Hard non-ferrous metal
- High-temperature-resistant materials
- Nickel-based alloys (e.g. Inconell and Hastelloy)
Drive Types
- Angle grinder
- Cordless angle grinder
| Drive Type: | Angle grinder, Cordless angle grinder |
|---|---|
| Filament Material: | Stainless steel wire (INOX) |
| Max. RPM: | 12500 RPM |
| Mounting System: | 5/8-11 |
| Pack Qty: | 5 |
| Trim Length: | 1 1/8 Inch |
| Wire Diameter: | 0.014 Inch |
Login