Coil Spring Brush, 1/2 Inch
$0.00
Product information "Coil Spring Brush, 1/2 Inch"
Technical information
1/2 Inch
| Brush Diameter | 1/2 Inch |
| Filament Material | Steel wire (ST) |
| Wire Diameter | 0.014 Inch |
| Shank Diameter | 1/4 Inch |
| Trim Length | 1 Inch |
| Max. RPM | 1800 RPM |
| Pack Qty | 10 |
For cleaning deep cavities, tubing, and more. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. Steel wire is temperature-resistant up to 600°F.
Advantages
- Particularly long trim length for optimal access to hard-to-reach areas.
- Long service life through use of PFERD special wire.
- Creates fine surfaces.
Applications
- Cleaning
- Deburring
- Derusting
- Removing oxide layers
- Paint stripping
- Roughening
Materials that can be worked
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Wood
- Cast iron
- Cast steel
Drive Types
- Flexible shaft drive
- Power drill
- Straight grinder
Safety
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm. The maximum permissible rotational speed is 1,800 rpm and should not be exceeded.
| Drive Type: | Flexible shaft drive, Power drill, Straight grinder |
|---|---|
| Filament Material: | Steel wire (ST) |
| Max. RPM: | 1800 RPM |
| Pack Qty: | 10 |
| Trim Length: | 1 Inch |
| Wire Diameter: | 0.014 Inch |
Login