COMBITWIST® Knot Wire Cup Brush, 4 Inch / Stainless steel wire (INOX)
$0.00
Product information "COMBITWIST® Knot Wire Cup Brush, 4 Inch / Stainless steel wire (INOX)"
Technical information
4 Inch / Stainless steel wire (INOX)
| Brush Diameter | 4 Inch |
| Filament Material | Stainless steel wire (INOX) |
| Wire Diameter | 0.02 Inch |
| Thread / Arbor | 5/8-11 |
| Trim Length | 1 3/8 Inch |
| Number of Knots | 48 |
| Max. RPM | 7000 RPM |
| Pack Qty | 1 |
The brush knots are knotted to 75% of the length. The two-row brush is designed for brushing large areas and for heavy-duty brushwork, such as deburring, cleaning, derusting and descaling, as well as removing spatter. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.
Advantages
- Double-row design enables fast results due to larger filament width.
- Maximum economic efficiency due to maximum service life and stock removal rate.
- Brush runs smoothly due to it's flawless balance.
- Designed for work on corners and edges as the knots are less likely to unravel.
- Optimal ratio of aggressiveness and flexibility.
- Very corrosion-resistant.
Applications
- Cleaning
- Deburring
- Derusting
- Descaling
- Removing heat discolouration
- Removing oxide layers
- Paint stripping
- Root seam processing
- Work on weld seams
- Work on fillet welds
Materials that can be worked
- Soft titanium alloys (tensile strength 500 N/mm²)
- Stainless steel (INOX)
- Titanium
- Titanium alloys
- Aluminum
- Bronze
- Cobalt-based alloys
- Hard non-ferrous metal
- High-temperature-resistant materials
- Nickel-based alloys (e.g. Inconell and Hastelloy)
Drive Types
- Angle grinder
| Drive Type: | Angle grinder |
|---|---|
| Filament Material: | Stainless steel wire (INOX) |
| Max. RPM: | 7000 RPM |
| Mounting System: | 5/8-11 |
| Pack Qty: | 1 |
| Trim Length: | 1 3/8 Inch |
| Wire Diameter: | 0.02 Inch |
Login