Fine grinding and finishing products
Abrasive Benchstand Belt
Abrasive Benchstand BeltFor universal applications from coarse to fine grinding. Long belts are compatible with commonly available belt grinders.Special featuresHigh tear strength with optimum flexibility.Consistent work results due to high grain adhesion.Cost-effective due to high abrasive performance and durability.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyFollow all safety instructions for abrasive belt use.Technical informationWidth2 inDrive typeBelt grinderGrit36Pack qty10
Abrasive Cord
Abrasive CordHighly flexible, therefore ideal for very fine deburring and finishing work in hard-to-reach places. Ideal for work on very small holes, grooves and cut-outs in tool and mold-making.Special featuresConforms to contours due to high flexibility.Low wear due to high tear strength and very high grain adhesion.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTrim to the necessary size as needed.Technical informationDia. External0.08 inDrive typeManual applicationGrit120Pack qty1
Abrasive File Belt
Abrasive File BeltFor universal applications from coarse to fine grinding. Short belts are compatible with commonly available belt grinders.Special featuresHigh tear strength with optimum flexibility.Consistent work results due to high grain adhesion.Cost-effective due to high abrasive performance and durability.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyFollow all safety instructions for abrasive belt use.Technical informationWidth1/4 inDrive typeBelt grinderGrit36Pack qty50
Abrasive spiral bands, conical
Spiral BandFor aggressive grinding with maximum stock removal on hard materials that do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding. In ISO 2421, abrasive spiral bands are designated as "cylindrical sleeves". GSB = bulk pack of abrasive spiral bandsSpecial featuresThe packaging size is ideally suited to industrial requirements.Abrasive spiral bands fit securely on the rubber drum holder as the holder expands during use.Outstanding service life even under the toughest work conditions, due to special manufacturing.Highest possible cost-effectiveness due to particularly high stock removal rate and aggressiveness of the abrasive.ApplicationsDeburringStep-by-step fine grindingLevelingRougheningSharpeningSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)TitaniumAluminumAnnealed cast ironBronzeCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTo easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the power tool.To ensure the abrasive spiral band is securely attached, follow the minimum speed for the rubber drum holder.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 6,000 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.Technical informationDia. External3/4 inDrive typeFlexible shaft driveGrit36Pack qty100
Abrasive spiral bands, cylindrical
Spiral BandFor coarse grinding work with a high stock removal rate and cool grinding. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading and result in cooler grinding. In ISO 2421, abrasive spiral bands are designated as "cylindrical sleeves". GSB = bulk pack of abrasive spiral bandsSpecial featuresAbrasive spiral bands fit securely on the rubber drum holder as the holder expands during use.Outstanding service life even under the toughest work conditions, due to special manufacturing.Highest possible cost-effectiveness due to particularly high stock removal rate and aggressiveness of the abrasive.ApplicationsDeburringStep-by-step fine grindingLevelingRougheningSharpeningSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)TitaniumTitanium alloysAnnealed cast ironBronzeCast steelCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTo easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the power tool.To ensure the abrasive spiral band is securely attached, follow the minimum speed for the rubber drum holder.For the best performance, use with a recommended peripheral speed of 4,000-6,000 SFPM.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 6,000 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.Technical informationDia. External1 1/8 inDrive typeFlexible shaft driveGrit36Pack qty100
Angle Grinder Flap Wheel
Angle Grinder Flap WheelWith unmounted flap wheels, coated abrasive flaps are arranged radially around the core in a fan-like structure. The flexible flaps perfectly adapt to surface contours. The abrasive grain is embedded in the sturdy, flexible cloth backing material with a resinoid bond. In ISO 5429, unmounted flap wheels are designated as "flap wheels." The ideal flap wheel for use on angle grinders in assembly shop operations. For universal applications from coarse to fine grinding.Special featuresConforms to contours due to high flexibility.Consistently high stock removal rate throughout the entire service life as new, aggressive abrasive is constantly exposed.Can be used face-down very close to edges and in corners thanks to special clamping system.Can be mounted directly on the angle grinder without additional clamping devices.ApplicationsDeburringStep-by-step fine grindingLevelingStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useFlap wheel wear and the thermal load on the workpiece are reduced by decreasing the contact pressure and peripheral speed, and by adding grinding oil.Stock removal rate should be increased by using a coarser grit, not by increasing the contact pressure. This avoids unnecessary flap wheel wear and prevents the thermal load of the workpiece.Increasing the speed results in a slightly finer surface quality. An increase in contact pressure results in a slightly coarser surface. The softer the workpiece material, the coarser the resulting surface (when using the same grit size).Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.For the best results, use a power tool with 1,000–1,500 watts.For best performance, use at a recommended peripheral speed of 7,900-9,800 SFPM.SafetyUnmounted flap wheels should only be used with the appropriate clamping flanges.The contact pressure has to be reduced significantly when the optimum rotational speed is exceeded.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.The maximum permitted peripheral speed is 15,800 SFPM.Technical informationDia. External4 1/2 inWidth3/4 inDrive typeAngle grinderGrit40Max. RPM13300Pack qty2
Bore polisher
Bore polisherThe flaps made of coated abrasive are arranged radially around the axis in a fan-type structure. Designed for fine grinding. In ISO 3919, mounted flap wheels are designated as "flap wheels with shaft."Special featuresConforms to contours due to high flexibility.Consistently high stock removal rate throughout the entire service life as new, aggressive abrasive is constantly exposed.ApplicationsCleaningDeburringStep-by-step fine grindingGrinding outLevelingRemoving oxide layersSurface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useFlap wheel wear and the thermal load on the workpiece are reduced by decreasing the contact pressure and peripheral speed, and by adding grinding oil.Stock removal rate should be increased by using a coarser grit, not by increasing the contact pressure. This avoids unnecessary flap wheel wear and prevents the thermal load of the workpiece.Increasing the speed results in a slightly finer surface quality. An increase in contact pressure results in a slightly coarser surface. The softer the workpiece material, the coarser the resulting surface (when using the same grit size).For the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.The contact pressure has to be reduced significantly when the optimum rotational speed is exceeded.Technical informationDia. External5/8 inWidth3/4 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit120Max. RPM31800Pack qty10
Buffing Drum, Soft Cotton Yarn
Buffing Drum, Soft Cotton YarnDue to the soft cotton yarn, ideal for high-gloss polishing with polishing pastes in tool and die-making. The ends of the threads provide optimum absorption of the polishing paste. Please order corresponding polishing pastes and arbor separately.Special featuresConforms to contours due to high flexibility.Can be freely shaped, meaning they can be used on complicated geometries.ApplicationsPolishingMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Technical informationDia. External4 inWidth4 inDrive typeDrum grindersMax. RPM3500Pack qty1
Cloth Backed Abrasive Sheet
Cloth Backed Abrasive SheetThe brown cloth-backed sheet is ideal for universal, heavy-duty use on alloyed and non-alloyed steels, as well as non-ferrous metals. The cloth-backed abrasive sheets comply with ISO 21948.Special featuresHigh grain adhesion on very flexible cloth.High abrasive performance.Oil and kerosene-resistant.High tear strength with optimum quality.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTear to the necessary size as needed.Technical informationWidth9 inDrive typeManual applicationGrit40Pack qty50
Cloth Ring, Sisal Fabric
Cloth Ring, Sisal FabricCloth rings are used for pre-polishing and high-gloss polishing with polishing pastes. If a very smooth surface finish is desired, use several or even all types successively. ST (sisal cloth) type for coarse pre-polishing.Special featuresConforms to contours due to high flexibility.Can be freely shaped, meaning they can be used on complicated geometries.ApplicationsPolishingMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for usePre-polishing of steel and INOX: Cloth rings ST with green polishing paste.Pre-polishing of aluminum and brass: Cloth rings ST with gray polishing paste.Pre-polishing of non-ferrous metals: Cloth rings ST with brown polishing paste.Type ST cloth rings achieve their best performance at a recommended peripheral speed of 2,000–3,000 SFPM.Technical informationVersionSTDia. External3 inWidth3/4 inDrive typeFlexible shaft driveMax. RPM7500Pack qty5
COMBICLICK® Backing Pad, Medium Hardness
COMBICLICK Backing Pad, Medium HardnessThis backing pad allows COMBICLICK® products to be used on commercially available angle grinders. The COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high airflow, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Hardness CC-GT (medium) = blackSpecial featuresThe geometry of the cooling slots significantly reduces the thermal load.High productivity due to minimized disc change times.Innovative quick-mounting system guarantees convenient handling with fast disc changes.Recommendations for useCC-H-GT backing pads are mainly used to work on stainless steel (INOX). They have a very high edge strength, which enables a higher contact pressure.SafetyThe maximum permitted peripheral speed is 15,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionmediumDia. External4 1/2 - 5 inDrive typeAngle grinderMax. RPM13300Pack qty1
COMBICLICK® CONTOUR Fiber Disc
COMBICLICK CONTOUR Fiber DiscThe COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. PFERD fiber discs are manufactured in accordance with ISO 16057 in shape A1 version F under the designation "vulcanized fiber disc". Very flexible and adaptable due to scalloped-edge outer contour shape. Helps prevent cutting into the workpiece. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding.Special featuresInnovative quick-mounting system guarantees convenient handling and cool grindingHigh productivity due to long service life and very high stock removal rate.Consistent surface finish resulting from high-quality abrasives.Extremely quick and easy disc changes reduce process costs.With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.ApplicationsDeburringStep-by-step fine grindingLevelingSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)TitaniumAnnealed cast ironBronzeCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse COMBICLICK® fiber discs with COMBICLICK® backing pads on commercially available angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.Use the CC-GT backing pad with M14 or 5/8" thread to maintain flexibility at the edge of the fibre discs.SafetyThe maximum permitted peripheral speed is 15,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External5 inDrive typeAngle grinderGrit120 CONTOURMax. RPM12200Pack qty25
COMBICLICK® Felt Disc
COMBICLICK Felt DiscThe COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Designed for polishing with polishing paste bars, grinding pastes or diamond polishing pastes in face-down grinding on medium-sized and large surfaces.Special featuresDurability makes this cost-effective.Precise handling throughout product lifespan due to high dimensional stability.Innovative quick-mounting system guarantees convenient handling and cool grindingExtremely quick and easy disc changes reduce process costs.With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.ApplicationsPolishingMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse COMBICLICK® felt discs with COMBICLICK® backing pads on variable speed angle grinders.For the best performance, use with a recommended peripheral speed of 1,000-2,000 SFPM. This provides an ideal compromise between polishing performance, thermal load on the workpiece and tool wear.When applying a different polishing paste, use a new unused felt disc.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 1/2 inDrive typeAngle grinderMax. RPM10500Pack qty5
COMBICLICK® Fiber Disc
COMBICLICK Fiber DiscThe COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. PFERD fiber discs are manufactured in accordance with ISO 16057 in shape A1 version F under the designation "vulcanized fiber disc". For universal grinding work from coarse to fine grinding in industry and professional trades.Special featuresInnovative quick-mounting system guarantees convenient handling and cool grindingHigh productivity due to long service life and very high stock removal rate.Consistent surface finish resulting from high-quality abrasives.Extremely quick and easy disc changes reduce process costs.With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.ApplicationsDeburringStep-by-step fine grindingLevelingSurface workWork on weld seamsWorking on edgesMaterials that can be workedSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useUse COMBICLICK® fiber discs with COMBICLICK® backing pads on commercially available angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 15,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 1/2 inDrive typeAngle grinderGrit24Max. RPM13300Pack qty25
COMBICLICK® POLICLEAN® PLUS Disc
COMBICLICK POLICLEAN PLUS DiscThe PLUS version (blue) has a considerably higher stock removal rate and a very good service life, and it is very aggressive.Special featuresInnovative quick-mounting system guarantees convenient handling and cool grindingExtremely quick and easy disc changes reduce process costs.With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.High edge strength due to extreme durability.The open structure of the non-woven material prevents loading.ApplicationsCleaningRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperElastomersFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionPCLD PLUSDia. External4 1/2 inDrive typeFlexible shaft drivePack qty5
COMBICLICK® Surface Conditioning Disc Hard
COMBICLICK Surface Conditioning Disc HardThe COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Designed for universal work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation, and light deburring work. Achieve matte and satin-finished surfaces.Special featuresInnovative quick-mounting system guarantees convenient handling and cool grindingExtremely quick and easy disc changes reduce process costs.With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.Low wear due to high tear strength.The open structure of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse COMBICLICK® non-woven discs with COMBICLICK® backing pads on variable speed angle grinders.For the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.Adding oil or water during grinding results in a finer finish, cooler grinding, and longer service life.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionfine, blueDia. External4 1/2 inDrive typeAngle grinderGrit240 FMax. RPM10500Pack qty10
COMBICLICK® Surface Conditioning Disc Soft
COMBICLICK Surface Conditioning Disc SoftThe COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Designed for very fine grinding on small and medium-sized surfaces and contours, and for cleaning metal and painted surfaces. Achieve matte and satin-finished surfaces. Highly open structure.Special featuresSoft and flexible grinding performance in face-down grinding.Innovative quick-mounting system guarantees convenient handling and cool grindingExtremely quick and easy disc changes reduce process costs.With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.High edge strength due to extreme durability.Can be profiled as desired, enabling optimal adjustment to the contour.The open structure of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse COMBICLICK® non-woven discs with COMBICLICK® backing pads on variable speed angle grinders.For the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionmediumDia. External4 1/2 inDrive typeAngle grinderGrit100Max. RPM10500Pack qty10
COMBICLICK® Surface Finishing Set
COMBICLICK Surface Finishing SetThe COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Set for work on surfaces, from coarse to mirror-polished. Consisting of COMBICLICK® fiber discs, non-woven discs, felt discs, backing pads, and polishing paste. The universal polishing paste is only available in a set and not individually.Special featuresCurated selection of the most common versions.Getting to know and testing the comprehensive system.Innovative quick-mounting system guarantees convenient handling and cool grindingExtremely quick and easy disc changes reduce process costs.With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.ApplicationsCleaningDeburringStep-by-step fine grindingLevelingPolishingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumBrassBronzeCast steelCopperHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useUse COMBICLICK® felt discs with COMBICLICK® backing pads on variable speed angle grinders.For the best performance, use with a recommended peripheral speed of 1,000-2,000 SFPM. This provides an ideal compromise between polishing performance, thermal load on the workpiece and tool wear.When applying a different polishing paste, use a new unused felt disc.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 1/2 inDrive typeAngle grinderPack qty1
COMBICLICK® Unitized Disc
COMBICLICK Unitized DiscThe COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. For achieving a very fine, uniform surface finish which, depending on requirements, is a sufficient preparation for high-gloss polishing. Recommended for work on larger surfaces on components made of stainless steel (INOX).Special featuresInnovative quick-mounting system guarantees convenient handling and cool grindingExtremely quick and easy disc changes reduce process costs.With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.High edge strength due to extreme durability.Can be profiled as desired, enabling optimal adjustment to the contour.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse COMBICLICK® non-woven discs with COMBICLICK® backing pads on variable speed angle grinders.For the best performance, use with a recommended peripheral speed of 3,000-7,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionW (soft)Dia. External4 1/2 inDrive typeAngle grinderGritfineMax. RPM8350Pack qty5
COMBIDISC® Abrasive Disc Set
COMBIDISC Abrasive Disc SetPrep-to-paint set includes a selection of coated and non-woven abrasives for removal of surface imperfections such as rust, loose paint or cold drawn mill scale. Selected discs leave the proper surface finish for excellent wet and dry paint and coating adhesion.Special featuresGetting to know and testing the comprehensive system.Curated selection of the most common versions.Reduced down time due to quick changes.Convenient to use due to simple handling and low-vibration working.No operational disruptions caused by sticking, slipping, or disengaging.Recommendations for useUse COMBIDISC® grinding discs with an arbor or abrasive disc holder on flexible shaft drives with an angle handpiece or small compressed-air or electric angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 9,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External2 inPack qty1
COMBIDISC® abrasive discs
COMBIDISC Abrasive DiscFor aggressive grinding with maximum stock removal rate on hard materials that do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding. The CD clamping system has a threaded connection with female thread (metal/plastic). Also compatible with the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On.Special featuresReduced down time due to quick changes.Convenient to use due to simple handling and low-vibration working.No operational disruptions caused by sticking, slipping, or disengaging.ApplicationsDeburringStep-by-step fine grindingLevelingRougheningSharpeningSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)TitaniumAluminumAnnealed cast ironBronzeCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse COMBIDISC® grinding discs with arbors or abrasive disc holders on flexible shaft drives with angle handpieces, compressed-air or electric angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 9,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External2 inDrive typeAngle grinderGrit24Pack qty100
COMBIDISC® CONTOUR Abrasive Disc
COMBIDISC CONTOUR Abrasive DiscVery flexible and adaptable due to scalloped-edge outer contour shape. Helps prevent cutting into the workpiece. The CD clamping system has a threaded connection with female thread (metal/plastic). Also compatible with the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On.Special featuresReduced down time due to quick changes.Convenient to use due to simple handling and low-vibration working.No operational disruptions caused by sticking, slipping, or disengaging.ApplicationsDeburringStep-by-step fine grindingLevelingRougheningSharpeningSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysAnnealed cast ironBrassBronzeCast steelCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useUse COMBIDISC® grinding discs with arbors or abrasive disc holders on flexible shaft drives with angle handpieces, compressed-air or electric angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.Use a 1" - 2" diameter abrasive disc holder.SafetyThe maximum permitted peripheral speed is 9,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External2 3/8 inDrive typeAngle grinderGrit60 CONTOURPack qty50
COMBIDISC® Felt Disc
COMBIDISC Felt DiscDesigned for polishing with polishing paste bars, grinding pastes, or diamond polishing pastes in face-down grinding on small and medium-sized surfaces. The CDR clamping system has a threaded connection with male thread (plastic). Also compatible with the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.Special featuresReduced down time due to quick changes.Convenient to use due to simple handling and low-vibration working.No operational disruptions caused by sticking, slipping, or disengaging.ApplicationsPolishingMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse COMBIDISC® felt discs with a abrasive disc holders on flexible shaft drives with angle handpieces, or small compressed-air or electric angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.When applying a different polishing paste, use a new unused felt disc.For the best performance, use with a recommended peripheral speed of 1,000-2,000 SFPM. This provides an ideal compromise between polishing performance, thermal load on the workpiece and tool wear.SafetyThe maximum permitted peripheral speed is 9,800 SFPM.Technical informationDia. External2 inDrive typeAngle grinderPack qty10
COMBIDISC® mini fibre discs
COMBIDISC Abrasive DiscDesigned for surface and edge grinding. The fiber backing strengthens the abrasive disc and improves stock removal. Each VICTOGRAIN abrasive grain triangle is firmly fixed on one of its sides to the backing material. Due to the slim design, VICTOGRAIN offers an extremely large chip space for maximum cutting efficiency. The structure of the triangular VICTOGRAIN is specially engineered to maximize results. The very fine crystalline structure ensures optimal wear characteristics as sharp cutting edges are always exposed, with the minimum amount of abrasive breaking off from the triangle. By combining all these properties together, users benefit from optimal, consistent performance, cool grinding and an extremely long service life with uniform workpiece surface roughness. The CD clamping system has a threaded connection with female thread (metal/plastic). Also compatible with the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On.Special featuresVICTOGRAIN abrasive grain allows for high productivity due to long service life, very high stock removal rate, less heat build-up in the workpiece, and a lower power output required for the power tool.Reduced down time due to quick changes.Convenient to use due to simple handling and low-vibration working.No operational disruptions caused by sticking, slipping, or disengaging.ApplicationsDeburringLevelingSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)SteelSteel, cast steelSteels up to 370 HV (< 38 HRC)Cast steelHard non-ferrous metalHardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse COMBIDISC® mini fiber discs with abrasive disc holders on flexible shaft drives with angle handpieces, or small compressed-air or electric angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 9,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External2 inDrive typeAngle grinderGrit36Pack qty100