Products

4-1/2"/5" ALUMASTER Carbide Insert Set - 10 Inserts

Specially developed cutting inserts from PFERD are durable and achieve a high stock removal rate. Cutting insert set for ALUMASTER High Speed Disc.

4-1/2"/5" ALUMASTER Service Set - TORX Key, 2 Screws, 2 Inserts

These service sets from PFERD allow the most common parts to be replaced in case of loss or damage. PFERD offers a replacement parts set for hole saw arbors and a service set for the ALUMASTER High Speed Disc. For swapping individual cutting inserts on the ALUMASTER High Speed Disc. This set contains two cutting inserts, two screws, and a hexalobular socket wrench.

8" Replacement depth gauge file, Cut 2 for ChainSharp CS-X

PFERD offers replacement files for different filing tools, such as replacement files for paint peelers, replacement file blades for universal chamfer files, chain saw files, and depth gauge files for chain saw sharpeners. Rectangular file with cut on two sides. Designed for the CHAIN SHARP CS-X chain saw sharpener.

Abrasive Benchstand Belt

Abrasive Benchstand BeltFor universal applications from coarse to fine grinding. Long belts are compatible with commonly available belt grinders.Special featuresHigh tear strength with optimum flexibility.Consistent work results due to high grain adhesion.Cost-effective due to high abrasive performance and durability.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyFollow all safety instructions for abrasive belt use.Technical informationWidth2 inDrive typeBelt grinderGrit36Pack qty10

Abrasive Cord

Abrasive CordHighly flexible, therefore ideal for very fine deburring and finishing work in hard-to-reach places. Ideal for work on very small holes, grooves and cut-outs in tool and mold-making.Special featuresConforms to contours due to high flexibility.Low wear due to high tear strength and very high grain adhesion.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTrim to the necessary size as needed.Technical informationDia. External0.08 inDrive typeManual applicationGrit120Pack qty1

Abrasive File Belt

Abrasive File BeltFor universal applications from coarse to fine grinding. Short belts are compatible with commonly available belt grinders.Special featuresHigh tear strength with optimum flexibility.Consistent work results due to high grain adhesion.Cost-effective due to high abrasive performance and durability.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyFollow all safety instructions for abrasive belt use.Technical informationWidth1/4 inDrive typeBelt grinderGrit36Pack qty50

Abrasive spiral bands, conical

Spiral BandFor aggressive grinding with maximum stock removal on hard materials that do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding. In ISO 2421, abrasive spiral bands are designated as "cylindrical sleeves". GSB = bulk pack of abrasive spiral bandsSpecial featuresThe packaging size is ideally suited to industrial requirements.Abrasive spiral bands fit securely on the rubber drum holder as the holder expands during use.Outstanding service life even under the toughest work conditions, due to special manufacturing.Highest possible cost-effectiveness due to particularly high stock removal rate and aggressiveness of the abrasive.ApplicationsDeburringStep-by-step fine grindingLevelingRougheningSharpeningSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)TitaniumAluminumAnnealed cast ironBronzeCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTo easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the power tool.To ensure the abrasive spiral band is securely attached, follow the minimum speed for the rubber drum holder.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 6,000 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.Technical informationDia. External3/4 inDrive typeFlexible shaft driveGrit36Pack qty100

Abrasive spiral bands, cylindrical

Spiral BandFor coarse grinding work with a high stock removal rate and cool grinding. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading and result in cooler grinding. In ISO 2421, abrasive spiral bands are designated as "cylindrical sleeves". GSB = bulk pack of abrasive spiral bandsSpecial featuresAbrasive spiral bands fit securely on the rubber drum holder as the holder expands during use.Outstanding service life even under the toughest work conditions, due to special manufacturing.Highest possible cost-effectiveness due to particularly high stock removal rate and aggressiveness of the abrasive.ApplicationsDeburringStep-by-step fine grindingLevelingRougheningSharpeningSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)TitaniumTitanium alloysAnnealed cast ironBronzeCast steelCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTo easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the power tool.To ensure the abrasive spiral band is securely attached, follow the minimum speed for the rubber drum holder.For the best performance, use with a recommended peripheral speed of 4,000-6,000 SFPM.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 6,000 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.Technical informationDia. External1 1/8 inDrive typeFlexible shaft driveGrit36Pack qty100

Acid Brush

Technical informationFilament MaterialHorsehairTrim Length3/4 InchPack Qty144Small, high-quality brushes for applying flux film and other coatings. Natural horsehair fibers minimize contamination in brazing and soldering applications.ApplicationsApplicationDrive TypesManual application

Knock-Out Bushing

Technical informationShapeTC Wheel bushingPack Qty10PFERD offers various arbor hole adapters for wheel brushes.AdvantagesEnables the use of brushes on all power tools as the hole diameter is adjusted to the required dimension.Machined metal components for accurate fit.

All-Purpose File 8" Second Cut with Handle

PFERD special files are designed for specific uses, such as for processing soft metals and thermosetting plastics, for deburring parts turned on a lathe, or for sharpening cutting tools. Rectangular file with different cuts on three sides. Tanged version with ergonomic file handle. Cross cut 1 on front side for roughing, single cut 2 on back side, and edge for sharpening. Combination of cross cut for coarse roughing and machining on one side and a single cut on the other side for sharpening cutting tools. Files come in point-of-sale packaging with ergonomic file handles.

Aluminum Flat File 10" Cut

PFERD special files are designed for specific uses, such as for processing soft metals and thermosetting plastics, for deburring parts turned on a lathe, or for sharpening cutting tools. Rectangular file, tanged and special cut on three sides, one edge uncut. Designed to work well on soft metals. Special cut specifically designed for coarse stock removal on soft metals such as aluminum.

Aluminum Half Round File 10" Cut

PFERD special files are designed for specific uses, such as for processing soft metals and thermosetting plastics, for deburring parts turned on a lathe, or for sharpening cutting tools. Half-round file, tanged with cut on two sides. Excellent filing performance due to the PFERD spiral cut on the half-round side. Designed to work well on soft metals. Special cut specifically designed for coarse stock removal on soft metals such as aluminum.

Angle Grinder Flap Wheel

Angle Grinder Flap WheelWith unmounted flap wheels, coated abrasive flaps are arranged radially around the core in a fan-like structure. The flexible flaps perfectly adapt to surface contours. The abrasive grain is embedded in the sturdy, flexible cloth backing material with a resinoid bond. In ISO 5429, unmounted flap wheels are designated as "flap wheels." The ideal flap wheel for use on angle grinders in assembly shop operations. For universal applications from coarse to fine grinding.Special featuresConforms to contours due to high flexibility.Consistently high stock removal rate throughout the entire service life as new, aggressive abrasive is constantly exposed.Can be used face-down very close to edges and in corners thanks to special clamping system.Can be mounted directly on the angle grinder without additional clamping devices.ApplicationsDeburringStep-by-step fine grindingLevelingStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useFlap wheel wear and the thermal load on the workpiece are reduced by decreasing the contact pressure and peripheral speed, and by adding grinding oil.Stock removal rate should be increased by using a coarser grit, not by increasing the contact pressure. This avoids unnecessary flap wheel wear and prevents the thermal load of the workpiece.Increasing the speed results in a slightly finer surface quality. An increase in contact pressure results in a slightly coarser surface. The softer the workpiece material, the coarser the resulting surface (when using the same grit size).Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.For the best results, use a power tool with 1,000–1,500 watts.For best performance, use at a recommended peripheral speed of 7,900-9,800 SFPM.SafetyUnmounted flap wheels should only be used with the appropriate clamping flanges.The contact pressure has to be reduced significantly when the optimum rotational speed is exceeded.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.The maximum permitted peripheral speed is 15,800 SFPM.Technical informationDia. External4 1/2 inWidth3/4 inDrive typeAngle grinderGrit40Max. RPM13300Pack qty2

BADGER | EZ Strip Wheel | 4" x 1" x 1/4" | Coarse

Non-Woven Strip Wheel, Series: EZ Series, Double Spindle Attachment, Silicon Carbide Abrasive, 4 in Wheel Diameter, 1/4 in Center Hole, 1 in Face Width, Coarse Grade, 8000 rpm Maximum, Black

Badger | Grinding & Pipeline Disc | Zirconia | Type 27

Badger | Grinding & Pipeline Discs | Aluminum Oxide | Type 27

Badger | Xtreme Cutting Wheel | Zirconia | Type 1

Badger | Xtreme Cutting Wheel | Zirconia | Type 27

Badger | Xtreme Flap Disc | Zirconia | HIGH DENSITY | Type 29

Premium Zirconia X weight Poly/Cotton blend. Most preferred material for flap discs worldwide.  This zirconia is a self sharpening grain offering continuous rate of cut and longevity. Ideally suited for all general grinding and blending of most materials.

Badger | Xtreme Flap Disc | Zirconia | STANDARD DENSITY | Type 29

Premium Zirconia X weight Poly/Cotton blend. Most preferred material for flap discs worldwide.  This zirconia is a self sharpening grain offering continuous rate of cut and longevity. Ideally suited for all general grinding and blending of most materials.

Bench grinding wheels CARBIDE

Bench grinding wheels CARBIDEPFERD bench grinding wheels have been designed to work with standard bench grinders. CARBIDE type bench grinding wheels are used on hard materials, such as for sharpening tungsten carbide tools.Special featuresDurable.High dimensional stability.High abrasive performance.Integrated telescopic bushings for mounting on almost any bench grinder spindle.ApplicationsDeburringSharpeningWorking on edges (chamfering, rounding)Materials that can be workedSteel materials with a hardness > 54 HRCTungsten carbideGlassHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useDressing the wheel on a regular basis exposes sharp grain and maintains an even grinding area.Constantly adjust the workpiece support to the grinding wheel diameter (gap width max. 1/8").SafetyThe maximum permitted peripheral speed is 6,900 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Before clamping, the grinding tool must be ring tested to make sure that it does not have any cracks (undamaged grinding tools give a clear tone).

Bench grinding wheels HSS

Bench grinding wheels HSSPFERD bench grinding wheels have been designed to work with standard bench grinders. The HSS design is ideal for sharpening HSS pilot drills or machining other high-alloy steels.Special featuresDurable.High dimensional stability.High abrasive performance.Integrated telescopic bushings for mounting on almost any bench grinder spindle.ApplicationsDeburringSharpeningWorking on edges (chamfering, rounding)Materials that can be workedTool steelsCase-hardened steelsHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useDressing the wheel on a regular basis exposes sharp grain and maintains an even grinding area.Constantly adjust the workpiece support to the grinding wheel diameter (gap width max. 1/8").SafetyThe maximum permitted peripheral speed is 6,900 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Before clamping, the grinding tool must be ring tested to make sure that it does not have any cracks (undamaged grinding tools give a clear tone).

Bench grinding wheels UNIVERSAL

Bench grinding wheels UNIVERSALPFERD bench grinding wheels have been designed to work with standard bench grinders. The UNIVERSAL type is ideal for general workshop use.Special featuresDurable.High dimensional stability.High abrasive performance.Integrated telescopic bushings for mounting on almost any bench grinder spindle.ApplicationsDeburringSharpeningWorking on edges (chamfering, rounding)Materials that can be workedStainless steel (INOX)SteelCast ironRecommendations for useDressing the wheel on a regular basis exposes sharp grain and maintains an even grinding area.Constantly adjust the workpiece support to the grinding wheel diameter (gap width max. 1/8").SafetyThe maximum permitted peripheral speed is 6,900 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Before clamping, the grinding tool must be ring tested to make sure that it does not have any cracks (undamaged grinding tools give a clear tone).