Fine grinding and finishing products
POLINOX® Unitized Disc
POLINOX Unitized DiscPOLINOX® unitized discs are used for face-down grinding with variable speed angle grinders. Ideal for larger surfaces. The compressed, non-woven material is bonded to a fiberglass back. POLINOX® unitized discs are made of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The different combinations of compression, fibers, grain, and the appropriate bond create non-woven products that offer a very good surface finish, high stock removal rate and long tool life. These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing. Medium-hard version with increased edge strength and service life for coarse deburring and cleaning applications.Special featuresCost-effective due to high abrasive performance and durability.Produces very good surface quality.Can be profiled as desired, enabling optimal adjustment to the contour.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useConsiderably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionMH (medium-hard)Dia. External4 1/2 inWidth1/2 inDrive typeAngle grinderGritfineMax. RPM10000Pack qty5
POLINOX® Unitized Wheel
POLINOX Unitized WheelPOLINOX® unitized wheels are made of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. This particular bond results in non-woven products that create very good surface finishes and have high stock removal rate and long service life. These properties come into play especially when deburring, blending, finishing, and polishing soft metals, alloyed and high-alloy steels, as well as titanium alloys. This version for straight grinders, flexible shafts and bench grinders is designed for working on smaller surfaces. Hard version with very high stock removal rate, good edge strength, and long service life for tough deburring and polishing applications.Special featuresCost-effective due to high abrasive performance and durability.Produces very good surface quality.Can be profiled as desired, enabling optimal adjustment to the contour.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useConsiderably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionH (hard)Dia. External2 inWidth1/8 inDrive typeFlexible shaft driveGritfineMax. RPM15300Pack qty10
POLINOX® Unmounted Flap Wheel
POLINOX Unmounted Flap WheelPOLINOX® unmounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. This flap structure improves stock removal and achieves a coarser surface finish.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External6 inWidth2 inDrive typeBench grinderGrit100Max. RPM4000Pack qty1
POLINOX® unmounted flap wheels, radial construction
POLINOX Non-Woven Finishing DrumPOLINOX® unmounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. Non-woven abrasive flaps are arranged radially, and the wheels are durable due to the dense packing of the flaps. Ideal for surface work. The product is designed for working on medium-sized surfaces with speed-adjustable angle grinders and fillet weld grinders, and can be mounted directly onto the drive system's spindle without the need for additional clamping devices.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.Technical informationDia. External4 inWidth2 inDrive typeAngle grinderGrit100Max. RPM6000Pack qty5
POLINOX® unmounted flap wheels, interleaved construction
POLINOX Non-Woven Finishing DrumPOLINOX® unmounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. This flap structure improves stock removal and achieves a coarser surface finish. The product is designed for working on medium-sized surfaces with speed-adjustable angle grinders and fillet weld grinders, and can be mounted directly onto the drive system's spindle without the need for additional clamping devices. This product is mainly used for work on large surfaces.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 inWidth2 inDrive typeAngle grinderGrit100Max. RPM6000Pack qty5
POLIROLL® cartridge rolls, cylindrical
Cartridge RollFor universal grinding work on metals and other materials. POLIROLL cartridge rolls consist of spirally wound coated abrasives. The abrasive grain is embedded in the resinoid coating on the sturdy backing material, which achieves the best possible abrasive performance.Special featuresConsistently high grinding performance due to self-sharpening abrasive grain.Secure fit when in use due to self-tensioning provided by grooved, conical arbor.Easy product change.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumAnnealed cast ironBrassCast steelCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useGrind with the tip instead of the flat surface so as to not damage the bond through exposure to heat.Mount POLIROLL with the bonded side facing toward the arbor.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 2,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External1/4 inWidth1 inDrive typeFlexible shaft driveGrit60Max. RPM25000Pack qty50
POLIROLL® cartridge rolls, conical
Cartridge RollFor universal grinding work on metals and other materials. POLIROLL cartridge rolls consist of spirally wound coated abrasives. The abrasive grain is embedded in the resinoid coating on the sturdy backing material, which achieves the best possible abrasive performance.Special featuresConsistently high grinding performance due to self-sharpening abrasive grain.Secure fit when in use due to self-tensioning provided by grooved, conical arbor.Easy product change.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumAnnealed cast ironBrassCast steelCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useGrind with the tip instead of the flat surface so as to not damage the bond through exposure to heat.Mount POLIROLL with the bonded side facing toward the arbor.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 2,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External3/8 inWidth1 1/2 inDrive typeFlexible shaft driveGrit60Max. RPM24000Pack qty50
POLISTAR-TUBE Abrasive Star
POLISTAR-TUBE Abrasive StarPOLISTAR-TUBE products are made of multi-layered cross buffs that are riveted together. They are designed for working on the inner surfaces of pipes and pipe bends. Use cross buffs with the suitable flexible shafts 4 PST-T DIN 10/M4 (EDP 94264).Special featuresConforms to contours due to high flexibility.Stainless steel rivets prevent contamination of stainless steel (INOX) workpieces.Achieves very fine surface quality grades of up to 8 ?in (0.2 ?m).ApplicationsDeburringStep-by-step fine grindingLevelingStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useFor the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM.Select the POLISTAR diameter based on the respective pipe's inner diameter: Dia. 2" for inner pipe dia. 1-3/8" - 1-5/8"Grit size 60 designed for roughness value 1.0-1.3 ?m Ra.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External2 inDrive typeFlexible shaft driveGrit60Max. RPM7650Pack qty10
POLIVLIES® flap discs, aluminum oxide A
POLIVLIES Non-Woven Flap DiscFor universal coarse to fine grinding applications in industry and professional trades. These are ideal for large stainless steel (INOX) surfaces. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.Creates a consistently high surface quality throughout the entire service life, as new sharp abrasive material is constantly exposed.Conforms to contours due to high flexibility.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 6,000-7,000 SFPM.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersioncoarse, yellow-brownDia. External4 1/2 inWidth3/4 inDrive typeAngle grinderGrit100 GMax. RPM13300Pack qty5
POLIVLIES® flap discs, Ceramic oxide CO-COOL
POLIVLIES Non-Woven Flap DiscFor aggressive grinding with maximum stock removal rate on hard materials that do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding. These are ideal for large stainless steel (INOX) surfaces. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.Creates a consistently high surface quality throughout the entire service life, as new sharp abrasive material is constantly exposed.Conforms to contours due to high flexibility.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 6,000-7,000 SFPM.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 1/2 inWidth3/4 inDrive typeAngle grinderGritCO-COOL 60 / A 100 GMax. RPM13300Pack qty5
POLIVLIES® Hand Pad
POLIVLIES Hand PadDesigned for very fine grinding on small to large surfaces and contours, and for manually cleaning metal and painted surfaces. Achieve matte and satin-finished surfaces. Highly open structure.Special featuresConforms to contours due to high flexibility.Access hard-to-reach areas.ApplicationsCleaningStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)StoneThermoplasticsTitaniumTitanium alloysAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useCut to the necessary size if needed.Technical informationWidth6 inDrive typeManual applicationGrit100Pack qty20
POLIVLIES® Hook & Loop Disc
POLIVLIES Hook & Loop DiscPOLIVLIES® hook and loop discs are designed for grinding larger surfaces. The flexible system includes a POLIVLIES® hook and loop disc and the associated POLIVLIES® hook and loop disc holder for use on contours. The pre-punched holes mean the discs can be centered and used with various backing pads. These are ideal for large stainless steel (INOX) surfaces. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.Creates a consistently high surface quality throughout the entire service life, as new sharp abrasive material is constantly exposed.Conforms to contours due to high flexibility.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM.Use with POLIVLIES® hook and loop disc holder.Break out the pre-punched centering hole if needed.Technical informationVersioncoarse, yellow-brownDia. External4 1/2 inDrive typeAngle grinderGrit100 GMax. RPM5300Pack qty10
Pressure-Sensitive Adhesive Disc (PSA)
Pressure-Sensitive Adhesive Disc (PSA)The flexible system includes hook and loop abrasive discs and holder and can be used on contours. The holder allows hook and loop abrasive discs to be used with commercially available speed-adjustable or slow-running angle grinders.Special featuresConforms to contours due to high flexibility.Quick and easy product change.High-quality adhesive keeps disc secured to holder.ApplicationsFinishingStep-by-step fine grindingLevelingSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumCast steelCopperHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useUse abrasive discs with abrasive disc holder.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 5,000 SFPM.Technical informationDia. External5 inDrive typeFlexible shaft driveGrit36Max. RPM4850Pack qty50
Sanding sponge Set with 4 abrasive sides
Sanding sponge Set with 4 abrasive sidesThe sanding sponges are suitable for sanding down flat and irregular surfaces by hand. They are ideal for working on wood, paint and metal, drywall construction and for all types of small workpieces. The three-piece set can be used for coarse to fine grinding.Special featuresGood grain adhesion on the backing material.Washable, meaning it can be reused.Good abrasive performance.ApplicationsChamferingCleaningDeburringDerustingFinishingStep-by-step fine grindingGrinding outRemoving oxide layersPaint strippingRougheningSurface grindingWorking on edgesMaterials that can be workedAluminumAnnealed cast ironBrassBrickBronzeCase-hardened steelsCast steelChipboardCobalt-based alloysConcreteCopperGlassGraphite and synthetic carbonGrey/nodular cast iron (GG/GJL, GGG/GJS)HardwoodHardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)PlasticsReinforced concreteSoft aluminium alloysSoft non-ferrous metalSoft woodStainless steel (INOX)SteelSteel, cast steelThermoplasticsTilesTitaniumTitanium alloysWoodTechnical informationWidth4 inPack qty1
Sanding sponge with 4 abrasive sides
Sanding sponge with 4 abrasive sidesIdeal for working on wood, paint and metal and for drywall construction in manual applications.Special featuresGood grain adhesion on the backing material.Good abrasive performance.High edge stability.ApplicationsChamferingCleaningDeburringDerustingFinishingStep-by-step fine grindingGrinding outRemoving oxide layersPaint strippingRougheningSurface grindingWorking on edgesMaterials that can be workedSoft woodStainless steel (INOX)SteelSteel, cast steelThermoplasticsTilesTitaniumTitanium alloysWoodZincConcreteAluminumAnnealed cast ironBrassBrickBronzeCase-hardened steelsCast steelChipboardCobalt-based alloysCopperGlassGraphite and synthetic carbonGrey/nodular cast iron (GG/GJL, GGG/GJS)HardwoodHardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)PlasticsReinforced concreteSoft aluminium alloysTechnical informationWidth4 inDrive typeManual applicationGrit60Pack qty5
Shop Roll Holder Wall Mount, Single Roll, For 1"
Shop Roll Holder Wall Mount, Single Roll, For 1"Holder for wall-mounting: for storing and tearing off to the desired length. Designed for rolls with 1", 1-1/2", 2" widths and 15" diameters.Special featuresAllows shop rolls to be properly stored.Technical informationDrive typeManual applicationPack qty1
Shop Roll, Flexible Light Duty
Shop Roll, Flexible Light DutyThe cloth-backed type is ideal for universal, heavy-duty use on alloyed and non-alloyed steels, as well as non-ferrous metals. The carton has a tear-off edge for separating the sections of abrasive belt at the workplace.Special featuresConforms to contours due to high flexibility.Low wear due to high tear strength and very high grain adhesion.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTrim to the necessary size as needed.Technical informationWidth1 inDrive typeManual applicationGrit50Pack qty1
Short belts, non-woven type
POLIVLIES Surface Conditioning BeltDesigned for universal work on surfaces like metal tubes, e.g. removing rough grinding traces, removing oxidation, and light deburring work. Achieve matte and satin-finished surfaces. Short belts are compatible with commonly available belt grinders. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.High tear strength with optimum flexibility.Consistent work results due to high grain adhesion.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.For best performance, use at a recommended peripheral speed of 1,000-3,000 SFPM.SafetyFollow all safety instructions for abrasive belt use.Technical informationVersioncoarse, yellow-brownWidth1/4 inDrive typeBelt grinderGrit100 GPack qty10
Spanner Wrench for Backing Pad Clamping Nut
Spanner Wrench for Backing Pad Clamping NutPFERD offers different face pin spanners (STL) with different widths across flats (SW).Technical informationDrive typeAngle grinderPack qty1
Textile Wheel for Angle Grinders
Textile Wheel for Angle GrindersPoliflex® fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances. They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and die-making applications. Poliflex® fine grinding tools with the TX bond are manufactured with standard aluminum oxide. The textile fabric inlays make the TX bond a very hard, sturdy bond. Suitable for use on edges.Special featuresProduces a fine, matte surface finish.Produces very good surface quality.Cost-effective due to durability and high stock removal rate.Highly convenient to use due to precise concentricity.ApplicationsStep-by-step fine grindingMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)TitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperHardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useDepending on the intended use, profile using a dressing diamond or ceramic dressing stone at a low rotational speed.For best performance, use at a recommended peripheral speed of 4,000-6,000 SFPM.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationBondTXDia. External4 1/2 inWidth1/4 inDrive typeAngle grinderGrit36Max. RPM13300Pack qty10
Unitized Mounted Point, Ball Shape, A26
Unitized Mounted Point, Ball Shape, A26Multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The SiC version is ideal for demanding tasks on hard or sensitive materials. The ball shape KU is often used for contour grinding and backside deburring.Special featuresCost-effective due to high abrasive performance and durability.Produces very good surface quality.Can be profiled as desired, enabling optimal adjustment to the contour.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Stainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincRecommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.Considerably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationShapeBallVersionMW (medium-soft)Width3/5 inDia. shank1/4 InchDrive typeFlexible shaft driveGritF (fine)Max. RPM44500Pack qty10
Unmounted Flap Wheel
Unmounted Flap WheelWith unmounted flap wheels, coated abrasive flaps are arranged radially around the core in a fan-like structure. The flexible flaps perfectly adapt to surface contours. The abrasive grain is embedded in the sturdy, flexible cloth backing material with a resinoid bond. In ISO 5429, unmounted flap wheels are designated as "flap wheels." For universal applications from coarse to fine grinding.Special featuresConforms to contours due to high flexibility.Consistently high stock removal rate throughout the entire service life as new, aggressive abrasive is constantly exposed.Can be used face-down very close to edges and in corners thanks to special clamping system.ApplicationsDeburringStep-by-step fine grindingLevelingStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useFlap wheel wear and the thermal load on the workpiece are reduced by decreasing the contact pressure and peripheral speed, and by adding grinding oil.Stock removal rate should be increased by using a coarser grit, not by increasing the contact pressure. This avoids unnecessary flap wheel wear and prevents the thermal load of the workpiece.Increasing the speed results in a slightly finer surface quality. An increase in contact pressure results in a slightly coarser surface. The softer the workpiece material, the coarser the resulting surface (when using the same grit size).For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.For the best results, use a power tool with 1,000–1,500 watts.SafetyUnmounted flap wheels should only be used with the appropriate clamping flanges.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.The contact pressure has to be reduced significantly when the optimum rotational speed is exceeded.The maximum permitted peripheral speed is 9,800 SFPM.Technical informationDia. External4 inWidth1 inDrive typeFlexible shaft driveGrit40Max. RPM9500Pack qty2
Velcro-Backed Abrasive Disc NET Type
Velcro-Backed Abrasive Disc NET TypeHook and loop-backed NET type abrasive discs feature a netting fabric, to which the abrasive grain is bonded with a high-performance bond system, making the discs very durable. For dust-free, universal grinding work on medium-sized and large surfaces.Special featuresVery long service life and high stock removal rate.Achieve very fine and even surface qualities.Dust-free work thanks to good extraction capability.No loading due to netting structure.Durable netting structure with high tear strength and edge stability.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumBrassBronzeCast steelCopperHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useUse the extraction connection on the machine to effectively remove the grinding dust.Technical informationDia. External5 inDrive typeEccentric orbital sanderGrit80Pack qty25
Wheel Reducing Flange (Pair)
Wheel Reducing Flange (Pair)For mounting unmounted flap wheels and POLINOX® grinding wheels on drive spindles. The clamping flanges are designed to lie countersunk in the tool.Special featuresCan be adapted to an existing drive spindle by drilling.Can be used face-down very close to edges and in corners thanks to special clamping system.Technical informationDia. External1 1/2 inDrive typeBench grinderPack qty1