COMBIDISC® CONTOUR Abrasive Disc, 2 3/8" Dia, 80 CONTOUR Grit
$0.00
Product number:
42759002
Product information "COMBIDISC® CONTOUR Abrasive Disc, 2 3/8" Dia, 80 CONTOUR Grit"
Technical information
2 3/8" Dia, 80 CONTOUR Grit
| Dia. External | 2 3/8 in |
| Drive type | Angle grinder |
| Grit | 80 CONTOUR |
| Pack qty | 50 |
Very flexible and adaptable due to scalloped-edge outer contour shape. Helps prevent cutting into the workpiece. The CD clamping system has a threaded connection with female thread (metal/plastic). Also compatible with the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On.
Special features
- Reduced down time due to quick changes.
- Convenient to use due to simple handling and low-vibration working.
- No operational disruptions caused by sticking, slipping, or disengaging.
Applications
- Deburring
- Step-by-step fine grinding
- Leveling
- Roughening
- Sharpening
- Surface work
- Work on weld seams
- Working on edges
Materials that can be worked
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Annealed cast iron
- Brass
- Bronze
- Cast steel
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Hardened, heat-treated steels over 370 HV (38 HRC)
Recommendations for use
- Use COMBIDISC® grinding discs with arbors or abrasive disc holders on flexible shaft drives with angle handpieces, compressed-air or electric angle grinders.
- Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
- Use a 1" - 2" diameter abrasive disc holder.
Safety
- The maximum permitted peripheral speed is 9,800 SFPM.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
| Pack Qty: | 50 |
|---|
Login
No reviews found. Share your insights with others.