Abrasive spiral bands, 1 1/2" Dia, 60 Grit
$0.00
Product number:
42209505
Product information "Abrasive spiral bands, 1 1/2" Dia, 60 Grit"
Technical information
1 1/2" Dia, 60 Grit
| Dia. External | 1 1/2 in |
| Drive type | Flexible shaft drive |
| Grit | 60 |
| Pack qty | 100 |
For universal applications from coarse to fine grinding. In ISO 2421, abrasive spiral bands are designated as "cylindrical sleeves". GSB = bulk pack of abrasive spiral bands
Special features
- Abrasive spiral bands fit securely on the rubber drum holder as the holder expands during use.
- Outstanding service life even under the toughest work conditions, due to special manufacturing.
- Highest possible cost-effectiveness due to particularly high stock removal rate and aggressiveness of the abrasive.
Applications
- Deburring
- Step-by-step fine grinding
- Leveling
- Roughening
- Sharpening
- Surface work
- Work on weld seams
- Working on edges
Materials that can be worked
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Thermoplastics
- Aluminum
- Annealed cast iron
- Brass
- Bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Hardened, heat-treated steels over 370 HV (38 HRC)
Recommendations for use
- To easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the power tool.
- To ensure the abrasive spiral band is securely attached, follow the minimum speed for the rubber drum holder.
- For the best performance, use with a recommended peripheral speed of 4,000-6,000 SFPM.
- Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
Safety
- The maximum permitted peripheral speed is 6,000 SFPM.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
- Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.
| Pack Qty: | 100 |
|---|
Login
No reviews found. Share your insights with others.