POLICAP® abrasive caps, cylindrical with pointed cone end, shape WKG
POLICAP® abrasive caps, cylindrical with pointed cone end, shape WKG
POLICAP Seamless Abrasive CapPOLICAP® abrasive caps in tapered conical shape with radius end, shape G. The taper angle of the cone is 30°. POLICAP® products have a seamless design and the entire surface area can be used. For universal use on steel workpieces (hardened, heat-treated, non-hardened). Specifically developed for special applications, e.g. in tool and die-making and repair. Also works on plastics, wood and fillers in model crafting. Color code for grit size 60 = brownSpecial featuresAbrasive caps and cones fit securely on the holder as it expands during use.Consistent shape accuracy and excellent fine grinding due to special manufacturing.Easy product change.ApplicationsStep-by-step fine grindingLevelingSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast steelHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useTo easily change the abrasive caps and cones, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder clamped in the power tool, and fix in place.For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.SafetyThe maximum permitted peripheral speed is 5,500 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External9/32 inDrive typeFlexible shaft driveGrit60Pack qty50