Aluminum oxide A-CONTOUR
COMBIDISC® CONTOUR Abrasive Disc
COMBIDISC CONTOUR Abrasive DiscVery flexible and adaptable due to scalloped-edge outer contour shape. Helps prevent cutting into the workpiece. The CD clamping system has a threaded connection with female thread (metal/plastic). Also compatible with the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On.Special featuresReduced down time due to quick changes.Convenient to use due to simple handling and low-vibration working.No operational disruptions caused by sticking, slipping, or disengaging.ApplicationsDeburringStep-by-step fine grindingLevelingRougheningSharpeningSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysAnnealed cast ironBrassBronzeCast steelCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useUse COMBIDISC® grinding discs with arbors or abrasive disc holders on flexible shaft drives with angle handpieces, compressed-air or electric angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.Use a 1" - 2" diameter abrasive disc holder.SafetyThe maximum permitted peripheral speed is 9,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External2 3/8 inDrive typeAngle grinderGrit60 CONTOURPack qty50