COMBIDISC® mini fibre discs
COMBIDISC® mini fibre discs
COMBIDISC Abrasive DiscDesigned for surface and edge grinding. The fiber backing strengthens the abrasive disc and improves stock removal. Each VICTOGRAIN abrasive grain triangle is firmly fixed on one of its sides to the backing material. Due to the slim design, VICTOGRAIN offers an extremely large chip space for maximum cutting efficiency. The structure of the triangular VICTOGRAIN is specially engineered to maximize results. The very fine crystalline structure ensures optimal wear characteristics as sharp cutting edges are always exposed, with the minimum amount of abrasive breaking off from the triangle. By combining all these properties together, users benefit from optimal, consistent performance, cool grinding and an extremely long service life with uniform workpiece surface roughness. The CD clamping system has a threaded connection with female thread (metal/plastic). Also compatible with the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On.Special featuresVICTOGRAIN abrasive grain allows for high productivity due to long service life, very high stock removal rate, less heat build-up in the workpiece, and a lower power output required for the power tool.Reduced down time due to quick changes.Convenient to use due to simple handling and low-vibration working.No operational disruptions caused by sticking, slipping, or disengaging.ApplicationsDeburringLevelingSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)SteelSteel, cast steelSteels up to 370 HV (< 38 HRC)Cast steelHard non-ferrous metalHardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse COMBIDISC® mini fiber discs with abrasive disc holders on flexible shaft drives with angle handpieces, or small compressed-air or electric angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 9,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External2 inDrive typeAngle grinderGrit36Pack qty100
COMBIDISC® RS Abrasive Disc
COMBIDISC RS Abrasive DiscFor aggressive grinding with maximum stock removal rate on hard materials that do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding. RS type COMBIDISC® abrasive discs are ideal for weld dressing of backwards repair welds, e.g. in cases, slots and grooves on engines and for processing welded-on combustor plates. Unlike on conventional abrasive discs, the abrasive coating is on the underside of the tool, which allows backwards working.Special featuresIdeal for use in extremely difficult-to-reach areas.Convenient and safe backward working.Reduced down time due to quick changes.Convenient to use due to simple handling and low-vibration working.No operational disruptions caused by sticking, slipping, or disengaging.ApplicationsDeburringStep-by-step fine grindingLevelingRougheningSharpeningSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)TitaniumAluminumAnnealed cast ironBronzeCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse COMBIDISC® mini fiber discs with abrasive disc holders on flexible shaft drives with angle handpieces, or small compressed-air or electric angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.Move the disc to the appropriate location on the workpiece. To grind, do not push it onto the surface, pull it toward yourself.To ensure get the most out of the disc's grinding surface, use the appropriate abrasive disc holder.Always use the RS abrasive discs at the specified optimum rotational speed and not the maximum permitted rotational speeds of the backing pad EDP 42454.SafetyThe maximum permitted peripheral speed is 9,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External1 1/2 inDrive typeAngle grinderGrit50Pack qty100