Products
DS Multi Power Carbide Cut-off Wheel
General-purpose cut-off wheel for effective cutting of many different materials, such as wood with embedded nails, plastics (e.g. pipes), non-ferrous metals and drywall construction materials. The cutting edge made of sharp tungsten carbide grains achieves clean, precise cuts.
DS Multi Power Carbide Cut-off Wheel, 5" x 0.045 x 7/8, retail packaging
Shape1A1R / DSDrive typeAngle grinderDrive type 2Cordless angle grinderDia. hole7/8 InchMax. RPM12200Pack qty1DS Multi Power Carbide Cut-off Wheel, 5" x 0.045 x 7/8, retail packagingGeneral-purpose cut-off wheel for effective cutting of many different materials, such as wood with embedded nails, plastics (e.g. pipes), non-ferrous metals and drywall construction materials. The cutting edge made of sharp tungsten carbide grains achieves clean, precise cuts.Special featuresIdeal choice for a variety of materials.Optimum cutting speed due to consistent diameter and high ease of cutting.Made in Germany.Long service life due to unique high-quality bonding of the tungsten carbide grain to the steel body.ApplicationsCutting of pipesCutting of profilesCutting of sheet metalCutting of solid materialCutting of thin sheet metal and profilesAbrasive materialsMaterials that can be workedAluminumBrassBrickBronzeChipboardCopperThermosetting plasticsElastomersFibre-reinforced thermosetting plastics (GRP, CRP)Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ? 40 %Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %Graphite and synthetic carbonHard aluminium alloysHard non-ferrous metalHardwoodOther non-ferrous metalsOtherPlasticsSoft aluminium alloysSoft non-ferrous metalSoft stoneSoft woodStainless steel (INOX)SteelStoneThermoplasticsTilesTough aluminium alloysWoodZincConcrete
ECO AC Paper Backed Abrasive Sheet
ECO AC Paper Backed Abrasive SheetThe stearate coating is a non-stick coating (AC) that prevents the abrasive sheets from clogging. The ECO AC version with aluminum oxide A is a low-cost alternative for general grinding work in industry and professional trades. The paper-backed abrasive sheets comply with ISO 21948. Grit size 60 comes in packs of 50.Special featuresHigh abrasive performance through very good grain adhesion.The non-stick coating (AC) prevents loading with low wear.High tear strength with optimum quality.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTear to the necessary size as needed.Technical informationWidth9 inDrive typeManual applicationGrit60Pack qty50
ECO W Paper Backed Abrasive Sheet
ECO W Paper Backed Abrasive SheetThe ECO W version with silicon carbide (SiC) is a low-cost alternative for use on paint and glass. Particularly suitable for all wet grinding work on conventional painted constructions. The paper-backed abrasive sheets comply with ISO 21948. Grit size 60 comes in packs of 50.Special featuresGood grain adhesion on very flexible and light paper.Maximum abrasive performance.Can be used for wet and dry grinding.High tear strength with optimum quality.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTear to the necessary size as needed.Technical informationWidth3/4 inDrive typeManual applicationGrit60Pack qty50
Edge Sharpener
Technical informationPFERD Universal Edge Sharpener 4-1/2"Item number13217110Cut2Cut files typeSecondEDP no.13025Length4.5 InchPFERD TOOLS typeUKFPackaging unit1 EACHRectangular file in a special plastic holder, straight cut on two sides. Ideal for easy and fast repair and for deburring on the bars of chain saws. Regular maintenance extends the service life of the bar and saw chain. Increases cutting precision and safety.Special featuresThe special holder enables easy tool control and exact, right-angled positioning of the chamfer file on the workpiece.Also excellent for sharpening ski edges.Ordering notesThe Universal chamfer file includes a file blade.Workpiece materialsSteels up to 370 HV (< 38 HRC)AluminumGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsDeburringWorking on edgesCompatible power toolsManual application
Encapsulated Bevel Stringer Bead Brush
Technical informationBrush Diameter5 InchFilament MaterialSteel wire (ST)Wire Diameter0.014 InchThread / Arbor5/8-11Trim Length1 1/4 InchMax. RPM15000 RPMPack Qty10Extremely aggressive brushing action, ideal for heavy-duty brushing. Designed for working on weld seams that are produced through automatic welding processes. Wire is bonded in a synthetic elastomer material which firmly supports the wire filaments, providing precisely controlled brush face, longer brush life and very aggressive removal rates. Limited flexibility. Brushes with encapsulated steel wire are available in different hardness grades. Designed for extremely aggressive use and high heat-resistance. Color: blackAdvantagesMaximum service life as premature wire breakage is prevented.Precise handling due to high dimensional stability.Extra-slim design allows access to hard-to-reach areas such as root weld seams.ApplicationsCleaningDeburringDerustingDescalingRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSteel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast ironCast steelDrive TypesAngle grinder
Encapsulated Crimped Wire End Brush
Technical informationBrush Diameter1/2 InchFilament MaterialSteel wire (ST)Wire Diameter0.01 InchShank Diameter1/4 InchTrim Length7/8 InchMax. RPM18000 RPMPack Qty150Extremely aggressive brushing action, ideal for heavy-duty brushing. Wire is bonded in a synthetic elastomer material which firmly supports the wire filaments, providing precisely controlled brush face, longer brush life and very aggressive removal rates. Limited flexibility. Brushes with encapsulated steel wire are available in different hardness grades. For general use. Aggressive enough for most applications. This brush is made with brass-plated steel wire. Color: green.AdvantagesPrecise handling due to high dimensional stability.Maximum service life as premature wire breakage is prevented.ApplicationsCleaningDeburringDerustingDescalingRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSteel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast ironCast steelDrive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Encapsulated Crimped Wire Wheel Brush
Technical informationBrush Diameter2 InchFilament MaterialSteel wire (ST)Wire Diameter0.02 InchShank Diameter1/4 InchTrim Length7/16 InchMax. RPM17000 RPMPack Qty150Extremely aggressive brushing action, ideal for heavy-duty brushing. Wire is bonded in a synthetic elastomer material which firmly supports the wire filaments, providing precisely controlled brush face, longer brush life and very aggressive removal rates. Limited flexibility. Brushes with encapsulated steel wire are available in different hardness grades. For general use. Aggressive enough for most applications. This brush is made with brass-plated steel wire. Color: green.AdvantagesMaximum service life as premature wire breakage is prevented.Precise handling due to high dimensional stability.Ideal for cleaning narrow or hard-to-reach areas such as grooves, fillets, and inside edges.ApplicationsCleaningDeburringDerustingDescalingRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSteel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast ironCast steelDrive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Encapsulated Cup Brush
Technical informationBrush Diameter4 InchFilament MaterialSteel wire (ST)Wire Diameter0.02 InchThread / Arbor5/8-11Trim Length1 1/8 InchMax. RPM7000 RPMPack Qty1Extremely aggressive brushing action, ideal for heavy-duty brushing. Wire is bonded in a synthetic elastomer material which firmly supports the wire filaments, providing precisely controlled brush face, longer brush life and very aggressive removal rates. Limited flexibility. Brushes with encapsulated steel wire are available in different hardness grades. Designed for extremely aggressive use and high heat-resistance. Color: blackAdvantagesMaximum service life as premature wire breakage is prevented.Precise handling due to high dimensional stability.ApplicationsCleaningDeburringDerustingDescalingRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSteel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast ironCast steelDrive TypesAngle grinder
Encapsulated Stringer Bead Brush
Technical informationBrush Diameter4 InchFilament MaterialSteel wire (ST)Wire Diameter0.02 InchThread / Arbor5/8-11Trim Length7/8 InchMax. RPM20000 RPMPack Qty10Extremely aggressive brushing action, ideal for heavy-duty brushing. For heavy-duty brushing in pipeline and container construction. Wire is bonded in a synthetic elastomer material which firmly supports the wire filaments, providing precisely controlled brush face, longer brush life and very aggressive removal rates. Limited flexibility. Brushes with encapsulated steel wire are available in different hardness grades. Designed for extremely aggressive use and high heat-resistance. Color: blackAdvantagesMaximum service life as premature wire breakage is prevented.Precise handling due to high dimensional stability.Extra-slim design allows access to hard-to-reach areas such as root weld seams.ApplicationsCleaningDeburringDerustingDescalingRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSteel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast ironCast steelDrive TypesAngle grinder
Encapsulated Stringer Bead Brush
Technical informationBrush Diameter6 InchFilament MaterialSteel wire (ST)Wire Diameter0.014 InchThread / Arbor5/8-11Trim Length1 1/16 InchMax. RPM9000 RPMPack Qty10Extremely aggressive brushing action, ideal for heavy-duty brushing in pipeline and container construction. Wire is bonded in a synthetic elastomer material which firmly supports the wire filaments, providing precisely controlled brush face, longer brush life and very aggressive removal rates. Limited flexibility. Brushes with encapsulated steel wire are available in different hardness grades. Designed for extremely aggressive use and high heat-resistance. Color: blackAdvantagesMaximum service life as premature wire breakage is prevented.Precise handling due to high dimensional stability.Extra-slim design allows access to hard-to-reach areas such as root weld seams.ApplicationsCleaningDeburringDerustingDescalingRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSteel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast ironCast steelDrive TypesAngle grinder
Ergonomic file handle set with gauges 25/30-30/35 ° for chain saw file 3/16"-1/4"
The set includes an ergonomic file handle for chain saw files as well as two chain saw gauges: an angle of 25 °/30 ° and an angle of 30 °/35 °. The chain saw gauge supports consistent sharpening results by providing the correct sharpening angle. It is attached to the stud of the ergonomic file handle EDP 17046. This set comes in individual packaging for retails.
Ergonomic file handles
Technical informationPFERD Soft Grip File Handle for 4-6" Files with Narrow TangsItem number12617120EDP no.11143Length4.25 InchPFERD TOOLS typeFH 2Packaging unit10 EACHPFERD offers file handles in different versions and dimensions. From wooden handles for chain saw files to ergonomic file handles for machinist's files, sharpening files or rasps, to quick-mounting handles for needle files or precision files, PFERD has handles for a wide variety of files. Ergonomic file handle for comfortable and safe working.Special featuresProtects hands against sharp edges and corners.Ergonomic design optimizes haptic experience.Prevents files from rolling away.Softer, comfortable plastic on the exterior with a harder, stable interior.Created without plasticizer.Compatible power toolsManual application
Expansion Joint Wire Brush
Technical informationBrush Diameter12 InchFace Width1/2 InchFilament MaterialSteel wire (ST)Wire Diameter0.035 InchArbor Hole1 InchTrim Length3 InchNumber of Knots40Max. RPM6000 RPMPack Qty2For brushing out loose and semi-solid substances, such as stone, grit and dross from joints and expansion joints in road and airport construction. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. Steel wire is temperature-resistant up to 600°F.AdvantagesExtra-slim design enables optimal access to hard-to-reach areas such as joints.Aggressive brushing action due to tightly-twisted wire knots.Long service life through use of PFERD special wire.ApplicationsCleaningDeburringDerustingDescalingRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSteel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast ironCast steel
External Tube Fitting Brush
Technical informationBrush Diameter1/4 InchFilament MaterialSteel wire (ST)Pack Qty6For external cleaning and preparation of metal tubes and joints. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.AdvantagesPlastic casing protects user‘s hands from sharp wire tips and pipe edges.Long service life through use of PFERD special wire.ApplicationsCleaningRougheningDrive TypesManual application
Style K Adapter
Technical informationShapeMetric adapterPack Qty1PFERD offers various arbor hole adapters for wheel brushes.AdvantagesEnables the use of brushes on all power tools as the hole diameter is adjusted to the required dimension.Machined metal components for accurate fit.
EZmount® Wire Wheel
Technical informationBrush Diameter6 InchFace Width3/4 InchFilament MaterialSteel wire (ST)Wire Diameter0.014 InchArbor Hole1 InchTrim Length7/8 InchMax. RPM6000 RPMPack Qty1Designed for light and medium-duty brushing in stationary application. Robust wheel brush with short, dense filament for universal application in the workshop. Variable bore diameters enable application on all standard stationary drive systems. Developed for use on bench grinders. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. Steel wire is temperature-resistant up to 600°F.AdvantagesHighly flexible, enabling optimal adaptation to the workpiece contour.Can be used with all common stationary drive systems and bench grinders.Long service life through use of PFERD special wire.ApplicationsCleaningDeburringDerustingRemoving oxide layersPaint strippingRougheningMaterials that can be workedSteel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)WoodCast ironCast steelElastomersDrive TypesBench grinderStationary machines
Felt Flap Disc
Felt Flap DiscFelt flap discs are used for pre-polishing and high-gloss polishing on medium-sized to large components. Due to their hardness and flexibility, felt flap discs are used when the exact form of geometric shapes has to be maintained. As a general rule, diamond polishing pastes and polishing paste bars are used for this.Special featuresConforms to contours due to high flexibility.Can be freely shaped, meaning they can be used on complicated geometries.Low thermal load on the workpiece.ApplicationsPolishingMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse the soft type for buffing and processing workpieces with lots of contours. If a very fine finish is desired, the hard and soft types can be used successively.Technical informationVersionW (soft)Dia. External4 1/2 inWidth7/8 inDrive typeAngle grinderMax. RPM8350Pack qty5
Felt Point
Felt PointDue to their hardness and flexibility, felt points are used when the exact form of geometric shapes has to be maintained. The cylindrical shape is mainly used peripherally.Special featuresCan be freely shaped, meaning they can be used on complicated geometries.Precise retention of geometric shapes due to the hardness of these products.ApplicationsPolishingMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 1,000-2,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.Use diamond polishing pastes and polishing paste bars.When applying a different polishing paste, use a new unused polishing product.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationShapeCylindersVersionM (medium)Dia. External1/4 inWidth3/8 inDia. shank1/8 InchDrive typeFlexible shaft driveMax. RPM79500Pack qty10
Felt Polishing Belt
Felt Polishing BeltDesigned for polishing with polishing paste bars and grinding pastes on tubular constructions and railings. Short belts are compatible with commonly available belt grinders.Special featuresHigh tear strength with optimum flexibility.Cost-effective due to high abrasive performance and durability.ApplicationsPolishingMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the polishing process, apply pre-polishing and high-gloss polishing successively.When changing the polishing paste, also replace the polishing belt so no contaminants are included from previous step.For best performance, use at a recommended peripheral speed of 1,000-3,000 SFPM.SafetyFollow all safety instructions for abrasive belt use.Technical informationWidth4 inDrive typeDrum grindersPack qty5
Felt Wheel
Felt WheelFelt wheels are mainly used peripherally for high-gloss polishing.Special featuresPrecise retention of geometric shapes due to the hardness of these products.Can be freely shaped, meaning they can be used on complicated geometries.ApplicationsPolishingMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse diamond polishing pastes and polishing paste bars.When applying a different polishing paste, use a new unused polishing product.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationShapeDiscVersionM (medium)Dia. External1 3/4 inWidth3/8 inDrive typeFlexible shaft driveMax. RPM13500Pack qty5
Fiber disc storage device
Fiber disc storage deviceFibre disc storage device made from impact-resistant plastic. Device helps maintain fiber disc shape and prevents curling. The storage device can be stood upright, as well as mounted to walls. Designed for 4" to 9" fiber disc diameters.Special featuresExcellent storage for fibre grinding discs.With quick adjustment device and attachment holes on the base.Technical informationDrive typeAngle grinderPack qty1
Fiber Disc
Fiber DiscPFERD fiber discs are manufactured in accordance with ISO 16057 in shape A2 version F under the designation "vulcanized fiber disc". For universal grinding work from coarse to fine grinding in industry and professional trades.Special featuresHigh productivity due to long service life and very high stock removal rate.Consistent surface finish resulting from high-quality abrasives.Conforms to contours due to high flexibility.ApplicationsDeburringStep-by-step fine grindingLevelingSurface workWork on weld seamsWorking on edgesMaterials that can be workedSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useUse fiber disc in accordance with ISO 15636 with backing pad on commercially available angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 15,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External7 inDrive typeAngle grinderGrit16Max. RPM8500Pack qty25
File brush HBF steel wire
Technical informationFilament MaterialSteel wire (ST)Wire Diameter0.006 InchTrim Length9/32 InchNumber of Rows1Pack Qty1PFERD offers an extensive range of scratch brushes in various shapes and filament materials. The file brush easily cleans chips from a loaded file. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. The brush has a robust wooden handle with wear-resistant steel wire filament.AdvantagesEasy to clean.Long service life through use of PFERD special wire.ApplicationsCleaningMaterials that can be workedSteelDrive TypesManual application