Products
File Card Fine Wire Brush
PFERD offers an extensive range of scratch brushes in various shapes and filament materials. The file brush easily cleans chips from a loaded file. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. The brush has a robust wooden handle with wear-resistant steel wire filament.
File Set - Hand, Square, Half-Round, Round, Half-Round Wood Rasp 8" Coarse Cut
Quality files for industry and trade. These files are packaged in a protective and climate-resistant PVC pouch for storage in a toolbox or on a workbench. Each file comes with an ergonomic file handle. This plastic pouch comes in attractive packaging with a transparent window.
File Set - Hand, Three Square, Square, Tapered Half Round, Round, Coarse Cut
Quality files for industry and trade. These files are packaged in a protective and climate-resistant PVC pouch for storage in a toolbox or on a workbench. Each file comes with an ergonomic file handle. This plastic pouch comes in attractive packaging with a transparent window.
File Set - Hand, Three Square, Square, Tapered Half Round, Round, Second Cut
Quality files for industry and trade. These files are packaged in a protective and climate-resistant PVC pouch for storage in a toolbox or on a workbench. Each file comes with an ergonomic file handle. This plastic pouch comes in attractive packaging with a transparent window.
File set, different cuts
Technical informationPFERD DIY File Set - 3 Pieces 8"Item number11202300EDP no.16070Length8 InchPFERD TOOLS type300Packaging unit1 EACHQuality files designed for DIY users. Precise, with a high stock removal rate and good durability. Also suitable for sharpening. Each file comes with an ergonomic file handle. Packaged in a cardboard box.Special featuresDesigned for a wide range of applications.Consistently high stock removal rate from the tip to the tang.Durable.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
Flap Disc Set, 4-1/2"x7/8, ZPSF EXTRA STEELOX, 40/60/80/120Grit
ShapePFF / A / T27AbrasiveZirconia, ZDrive typeAngle grinder, Cordless angle grinderMax. RPM12200Pack qty1This set contains four POLIFAN flap discs for steel and stainless steel (INOX). High stock removal rate and good durability.AdvantagesFast work and high economic efficiency due to the aggressive stock removal rate.Very good durability due to high flap density.Also works well with low-power angle grinders.ApplicationsChamferingDeburringSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel
Flap Disc Set, ZPSF EXTRA STEELOX, Flat
This set contains four POLIFAN flap discs for steel and stainless steel (INOX). High stock removal rate and good durability.
Flap Disc, PVL-R, POLIVLIES® CURVE
Flap Disc, PVL-R, POLIVLIES CURVEEngineered for maximum operational efficiency, the PFERD PVL-R POLIVLIES® CURVE Flap Disc delivers superior surface conditioning and material removal performance. Featuring a coarse-grade aluminum oxide abrasive, this disc is optimized for aggressive stock removal while maintaining consistent surface integrity across ferrous and non-ferrous metals. Constructed with a high-performance abrasive non-woven material, the flap design continuously exposes fresh, sharp abrasive grains during use, ensuring uniform surface quality and extended service life. The CURVE profile allows for edge grinding and contour following, making it ideal for applications requiring precision on irregular geometries and hard-to-reach surfaces.Special featuresCost-effective due to high abrasive performance and durability.Creates a consistently high surface quality throughout the entire service life, as new sharp abrasive material is constantly exposed.Conforms to contours due to high flexibility.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 6,000-7,000 SFPM.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersioncoarseDia. External4 1/2 inDrive typeAngle grinderGrit100Max. RPM13300Pack qty5
Z START STEELOX, Flap Disc
Technical informationThe START range offers reliable PFERD TOOLS quality for trade and assembly work. For grinding and blending steel and stainless steel (INOX). Zirconia abrasive for long service life.
Flap Disc, Z PSF EXTRA STEELOX, Flat, Zirconia
Choose the Universal Line PSF for processing the most common materials. These robust products achieve good results with increased economic efficiency. POLIFAN flap disc for steel and stainless steel (INOX). Aggressive stock removal rate and good service life.
Flap Disc, Z SGP CURVE STEELOX, Zirconia
Special Line SGP includes products engineered for specific tasks that offer the user key advantages over conventional products. This quality line also includes products that, due to their particularly high performance, offer ultimate economic efficiency. The patented flap disc POLIFAN-CURVE has been specially developed for work on fillet welds. It is the only flap disc in the world featuring a radial configuration of flaps allowing for grinding with all surfaces of the disc. PFERD’s POLIFAN CURVE is patented in many countries across the globe. High-performance flap disc for maximum stock removal on steel and stainless steel (INOX).
Flap Disc, A SG STEELOX
ShapePFF / A / T27AbrasiveAluminum oxide AGrit40Drive typeAngle grinderMax. RPM15300Pack qty10Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. POLIFAN flap disc for steel and stainless steel (INOX). High stock removal rate and very long service life.AdvantagesFast work and high economic efficiency due to the high stock removal rate.Very long service life.ApplicationsStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel
Flap Disc, A SGP CURVE ALU
ShapePFR CURVEAbrasiveA-COOLGrit40Drive typeAngle grinderMax. RPM13300Pack qty10POLIFAN-CURVESpecial Line SGP includes products engineered for specific tasks that offer the user key advantages over conventional products. This quality line also includes products that, due to their particularly high performance, offer ultimate economic efficiency. The patented flap disc POLIFAN-CURVE has been specially developed for work on fillet welds. It is the only flap disc in the world featuring a radial configuration of flaps allowing for grinding with all surfaces of the disc. PFERD’s POLIFAN CURVE is patented in many countries across the globe. Special flap disc for work on fillet welds on aluminum.AdvantagesHigh productivity due to high stock removal rate.Excellent service life when working on fillet welds.Precise and optimum grinding of the fillet weld geometry.ApplicationsChamferingDeburringWork on weld seamsWork on fillet weldsMaterials that can be workedAluminumOther non-ferrous metalsRecommendations for useAfter the abrasive on the outer edge of the disc has worn down, the disc can continue to be used as a conventional flap disc.For fillet weld radii > 5/16” or throat thickness > 1/4” with 90° joint, width at the radius: 9/16” with diameter 6” or 7”.
Flap Disc, A-COOL SG INOX+ALU
ShapePFC / B / T29AbrasiveA-COOLGrit40Drive typeAngle grinderMax. RPM13300Pack qty10Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. POLIFAN flap disc with particularly cool grinding on materials with poor thermal conduction such as stainless steel (INOX) and aluminum.AdvantagesLess heat build-up in the workpiece compared with other flap discs.Special top-sized abrasive material prevents loading on soft metals such as aluminum.ApplicationsChamferingDeburringStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)AluminumOther non-ferrous metalsRecommendations for useUse only grit sizes 40 and 60 for aluminum.
Flap Disc, CO SGP CURVE STEELOX
ShapePFR CURVEAbrasiveCO-COOLGrit60Drive typeAngle grinderMax. RPM12200Pack qty10POLIFAN-CURVESpecial Line SGP includes products engineered for specific tasks that offer the user key advantages over conventional products. This quality line also includes products that, due to their particularly high performance, offer ultimate economic efficiency. The patented flap disc POLIFAN-CURVE has been specially developed for work on fillet welds. It is the only flap disc in the world featuring a radial configuration of flaps allowing for grinding with all surfaces of the disc. PFERD’s POLIFAN CURVE is patented in many countries across the globe. High-performance flap disc for achieving fine finishes on steel and stainless steel (INOX).AdvantagesHigh productivity due to high stock removal rate.Excellent service life when working on fillet welds.Precise and optimum grinding of the fillet weld geometry.ApplicationsChamferingDeburringWork on weld seamsWork on fillet weldsMaterials that can be workedStainless steel (INOX)SteelRecommendations for useAfter the abrasive on the outer edge of the disc has worn down, the disc can continue to be used as a conventional flap disc.For fillet weld radii > 3/16” or throat thickness ≤ 1/4” with 90° joint, width at the radius: 7/16” with diameter 6”.
Flap Disc, CO-COOL SG STEELOX
ShapePFF / A / T27AbrasiveCO-COOLGrit40Drive typeAngle grinderMax. RPM13300Pack qty10Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. POLIFAN flap disc with particularly cool grinding for materials that are difficult to machine such as high-alloy and rust-resistant steel, nickel-based alloys or titanium alloys.AdvantagesThe self-sharpening action of the ceramic oxide grain guarantees optimal results, even on materials that are difficult to grind.Less heat build-up in the workpiece compared with other flap discs.ApplicationsChamferingDeburringStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)SteelHard aluminium alloysMill scaleNickel-based alloys (e.g. Inconell and Hastelloy)Nickel or titanium-based superalloysScale
Flap Disc, CO-FREEZE SG INOX
ShapePFF / A / T27AbrasiveCO-FREEZEGrit36Drive typeAngle grinderMax. RPM13300Pack qty10Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. POLIFAN flap disc designed for stainless steel (INOX) with ultra-cool grinding. Due to the ceramic oxide CO with cooling topsizing (FREEZE), there is no heat discoloration – no reworking is required.AdvantagesThe FREEZE topsizing significantly reduces heat build-up in the workpiece compared with standard flap discs.Fast work and high economic efficiency due to the aggressive stock removal rate.Maximum aggressiveness over the entire service life.Excellent durability.Sparks are minimized. Damage to stainless steel workpieces from sparks is almost entirely eliminated.ApplicationsStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)Cobalt-based alloysNickel-based alloys (e.g. Inconell and Hastelloy)Nickel or titanium-based superalloysRecommendations for useDuring use of the POLIFAN CO-FREEZE SG INOX, the flaps exhibit an unusual wear pattern after just a few seconds. Highly effective fillers form a shiny cooling film on the flaps (this should not be mistaken for “glazing”). This provides the basis for ultracool grinding.
Flap Disc, Z PSF EXTRA STEELOX
ShapePFF / A / T27AbrasiveZirconia, ZGrit36Drive typeAngle grinderMax. RPM13300Pack qty10Universal Line PSFChoose the Universal Line PSF for processing the most common materials. These robust products achieve good results with increased economic efficiency. POLIFAN flap disc for steel and stainless steel (INOX). Aggressive stock removal rate and good service life.AdvantagesFast work and high economic efficiency due to the aggressive stock removal rate.Very good durability due to high flap density.Also works well with low-power angle grinders.ApplicationsChamferingDeburringStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel
Flap Disc, Z PSF STEELOX
ShapePFC / B / T29AbrasiveZirconia, ZGrit40Drive typeAngle grinder, Cordless angle grinderMax. RPM13300Pack qty10Universal Line PSFChoose the Universal Line PSF for processing the most common materials. These robust products achieve good results with increased economic efficiency. POLIFAN flap disc for steel and stainless steel (INOX). Aggressive stock removal rate and good service life. The Bosch X-LOCK system for angle grinders enables you to change products quickly and easily. Instead of a round center hole, the X-LOCK system features an X-shaped contour, which allows the product to be fixed on the angle grinder in a form-fitting manner. This means different kinds of products can be clamped in a reliable manner in a very short space of time. The unique system meets the highest of quality and safety standards and can withstand rough and harsh application conditions. X-LOCK from Bosch is the world's first quick-changing system for angle grinders: Position the tool in the X-LOCK holder, click it into place – and you're ready! It's never been so easy to change accessories on angle grinders. X-LOCK is creating a new standard which makes professionals’ lives easier and increases their productivity. Bosch Power Tools relies on strong partners like PFERD. PFERD has developed the principle for connecting the X-LOCK punched part with the bonded abrasive, flap discs and brushes and created the conditions to enable them to be produced industrially.AdvantagesWith X-LOCK arbor for quick and easy product changingSecure fixing as the product audibly clicks into place.POLIFAN flap discs with X-LOCK can also be used on traditional angle grinders with M14 and 5/8"-11 threads.Fast work and high economic efficiency due to the high stock removal rate.Durable.Also works well with low-power angle grinders.ApplicationsChamferingDeburringStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)SteelRecommendations for usePlace the product on the X-LOCK quick-change system of your angle grinder and secure it by lightly pressing it down. The product will audibly click into place.Release the product by using the lever.
Flap Disc, Z PSF TRIM STEELOX
ShapePFF / A / T27AbrasiveZirconia, ZGrit40Drive typeAngle grinderMax. RPM13300Pack qty10Universal Line PSFChoose the Universal Line PSF for processing the most common materials. These robust products achieve good results with increased economic efficiency. POLIFAN flap disc for steel and stainless steel (INOX). Aggressive stock removal rate and good service life. POLIFAN flap disc with trimmable plastic backer.AdvantagesFast work and high economic efficiency due to the aggressive stock removal rate.Very good durability due to high flap density.Also works well with low-power angle grinders.Easily trimmable product.ApplicationsChamferingDeburringStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)SteelRecommendations for useTrim the flap disc on sharp metal edges, files, or with cutting inserts.Trimming should only be done at a 45° contact angle of.Press the disc carefully on to the workpiece and increase the pressure until a chip is formed. Keep the pressure until the disc has been trimmed to the desired dimension.Plastic backer can be trimmed to expose unused coated material once the outside edge has worn down.
Flap Disc, Z SG POWER STEELOX
ShapePFC / B / T29AbrasiveZirconia, ZGrit40Drive typeAngle grinderMax. RPM12200Pack qty10Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. The POLIFAN POWER flap disc stands out due to its aggressive stock removal rate and excellent service life while achieving maximum economic efficiency. It is the best conventional flap disc for steel. For demanding requirements, the high-performance POLIFAN-POWER flap disc is the first choice for the machining of steel. This versatile POLIFAN flap disc offers an optimal combination of outstanding service life and extremely high stock removal rates. The Bosch X-LOCK system for angle grinders enables you to change products quickly and easily. Instead of a round center hole, the X-LOCK system features an X-shaped contour, which allows the product to be fixed on the angle grinder in a form-fitting manner. This means different kinds of products can be clamped in a reliable manner in a very short space of time. The unique system meets the highest of quality and safety standards and can withstand rough and harsh application conditions. X-LOCK from Bosch is the world's first quick-changing system for angle grinders: Position the tool in the X-LOCK holder, click it into place – and you're ready! It's never been so easy to change accessories on angle grinders. X-LOCK is creating a new standard which makes professionals’ lives easier and increases their productivity. Bosch Power Tools relies on strong partners like PFERD. PFERD has developed the principle for connecting the X-LOCK punched part with the bonded abrasive, flap discs and brushes and created the conditions to enable them to be produced industrially.AdvantagesWith X-LOCK arbor for quick and easy tool changing.Secure fixing as the product audibly clicks into place.POLIFAN flap discs with X-LOCK can also be used on traditional angle grinders with M14 and 5/8"-11 threads.Fast work and maximum economic efficiency due to the aggressive stock removal rate.Maximum aggressiveness over the entire service life.Excellent durability.ApplicationsChamferingDeburringWork on weld seamsMaterials that can be workedStainless steel (INOX)SteelRecommendations for useCan also be used for surface grinding on steel.Place the product on the X-LOCK quick-change system of your angle grinder and secure it by lightly pressing it down. The product will audibly click into place.Release the product by using the lever.
Flap Disc, Z SGP CURVE STEELOX
ShapePFR CURVEAbrasiveZirconia, ZGrit40Drive typeAngle grinderMax. RPM12200Pack qty2POLIFAN-CURVESpecial Line SGP includes products engineered for specific tasks that offer the user key advantages over conventional products. This quality line also includes products that, due to their particularly high performance, offer ultimate economic efficiency. The patented flap disc POLIFAN-CURVE has been specially developed for work on fillet welds. It is the only flap disc in the world featuring a radial configuration of flaps allowing for grinding with all surfaces of the disc. PFERD’s POLIFAN CURVE is patented in many countries across the globe. High-performance flap disc for maximum stock removal on steel and stainless steel (INOX).AdvantagesHigh productivity due to high stock removal rate.Excellent service life when working on fillet welds.Precise and optimum grinding of the fillet weld geometry.ApplicationsChamferingDeburringWork on weld seamsWork on fillet weldsMaterials that can be workedStainless steel (INOX)SteelRecommendations for useAfter the abrasive on the outer edge of the disc has worn down, the disc can continue to be used as a conventional flap disc.For fillet weld radii > 3/16” or throat thickness ≤ 1/4” with 90° joint, width at the radius: 7/16” with diameter 6”.
Flap Disc, Z SGP STRONG STEEL
ShapePFC STRONG / B / T29AbrasiveZirconia, ZGrit36Drive typeAngle grinderMax. RPM13300Pack qty10Special Line SGPSpecial Line SGP includes products engineered for specific tasks that offer the user key advantages over conventional products. This quality line also includes products that, due to their particularly high performance, offer ultimate economic efficiency. Users who rely on top performance choose the POLIFAN-STRONG flap disc. It surpasses conventional flap discs and redefines the highest levels of efficiency. With its patented and unique design, it achieves an unsurpassed stock removal rate. It also has an astonishingly long service life over conventional flap discs. PFERD’s POLIFAN STRONG is patented in many countries across the globe. The innovative POLIFAN-STRONG flap disc is unique and has a particularly high performance level. Due to its patented design, it offers significantly higher economic efficiency compared to conventional flap discs.AdvantagesFast grinding due to constant grinding aggressiveness down to the last abrasive grit.Ultimate economic efficiency due to maximum stock removal and less wear on discs.The ultimate durability.ApplicationsChamferingDeburringWork on weld seamsMaterials that can be workedSteelRecommendations for useIdeal for work that requires a high stock removal rate like on weld seams.
Flap Drum
Flap DrumDesigned for universal work on medium-sized and large metal surfaces, e.g. fine grinding work on large radii in container, kitchen, and appliance construction, and achieving uniform finishes (grinding patterns) on large surfaces and contours in manual applications. Designed for all conventional keyway systems.Special featuresConforms to contours due to high flexibility.Consistently high stock removal rate throughout the entire service life as new, aggressive abrasive is constantly exposed.ApplicationsDeburringStep-by-step fine grindingLevelingStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useFlap wheel wear and the thermal load on the workpiece are reduced by decreasing the contact pressure and peripheral speed, and by adding grinding oil.Stock removal rate should be increased by using a coarser grit, not by increasing the contact pressure. This avoids unnecessary flap wheel wear and prevents the thermal load of the workpiece.Increasing the speed results in a slightly finer surface quality. An increase in contact pressure results in a slightly coarser surface. The softer the workpiece material, the coarser the resulting surface (when using the same grit size).For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.For the best results, use a power tool with 1,000–1,500 watts.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.The contact pressure has to be reduced significantly when the optimum rotational speed is exceeded.The maximum permitted peripheral speed is 6,300 SFPM.Technical informationDia. External4 inWidth4 inDrive typeDrum grindersGrit40Max. RPM6100Pack qty1