Mounted Points
PFERD Resin Mounted Point, INOX, Series A
PFERD Resin Mounted Point, INOX, 3/4" x 2-1/2, 30 Grit, A1, Aluminum Oxide, 1/4" ShankThe INOX type is specifically designed for surface work on stainless steel (INOX) and for universal use on non-ferrous metals and bronze. These products are used for rough grinding of stainless steel (INOX) castings and grinding of molded parts made of high temperature-resistant alloys. Series A mounted points are generally used on larger, stainless steel components, such as in container construction. Due to the special shapes, it is possible to grind in a variety of contours. Applications include grinding in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.Special featuresIdeal for use on temperature-sensitive materials due to cool-grinding properties.Increased operator comfort due to low vibration grindingApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedStainless steel (INOX)BronzeHard non-ferrous metalRecommendations for useINOX mounted points perform best at a peripheral speed of 6,900-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".Technical informationShapeA 1VersionINOXDia. External3/4 inWidth2 1/2 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit30Pack qty10
PFERD Resin Mounted Point, INOX, Series W
PFERD Resin Mounted Point, INOX, 1" x 2, 30 Grit, W222, Aluminum Oxide, 1/4" ShankThe INOX type is specifically designed for surface work on stainless steel (INOX) and for universal use on non-ferrous metals and bronze. These products are used for rough grinding of stainless steel (INOX) castings and grinding of molded parts made of high temperature-resistant alloys. The cylindrical shape is ideal for grinding bores, radii and contours.Special featuresIdeal for use on temperature-sensitive materials due to cool-grinding properties.Increased operator comfort due to low vibration grindingApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedStainless steel (INOX)BronzeHard non-ferrous metalRecommendations for useINOX mounted points perform best at a peripheral speed of 6,900-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".Technical informationShapeW 222VersionINOXDia. External1 inWidth2 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit30Pack qty10
PFERD Telescoping Bench Wheel Bushing, 1/2" thick for reducing 1" arbor to 3/4, 5/8, 1/2
PFERD Telescoping Bench Wheel Bushing, 1/2" thick for reducing 1" arbor to 3/4, 5/8, 1/2PFERD bench grinder bushings provide a safe method of reducing the wheel arbor to accommodate various spindle sizes. The bushing should be flush on both sides of the wheel, and should not interfere with the flanges.Technical informationDrive typeBench grinderPack qty1
Whetstone 10" Single Sided
Whetstone 10" Single SidedThe ceramic whetstone is particularly suitable for sharpening scythes, sickles, knives and other cutting tools.Special featuresThe whetstone fits nicely in one's hand due to its oval shape.The sharp abrasive SiC ensures very good grinding with a good surface.ApplicationsDeburringSharpeningMaterials that can be workedHardened, heat-treated steels over 370 HV (38 HRC)SteelSteel materials with a hardness > 54 HRCTool steelsRecommendations for useWhetstones for cutting tools can be used for both wet and dry grinding.Re-sharpening the cutting edge when needed preserves the sharpness of the products.Do not use on ceramic knives or knives with serrated edges.SafetyTo avoid injuries, wear protective gloves during the sharpening process and use caution.