High-performance tungsten carbide burs, EDGE cut, Cone counterbore EDGE 45°
$0.00
Product information "High-performance tungsten carbide burs, EDGE cut, Cone counterbore EDGE 45°"
Technical information
PFERD Bearing Carbide Bur SK-6 EDGE Cut 45° 5/8" x 1/8", 1/4" Shank
| Item number | 21725105 |
| Angle | 90 ° |
| Dia. External | 5/8 Inch |
| Dia. shank | 1/4 Inch |
| EDP no. | 25105 |
| Overall length | 2-3/64 Inch |
| Cut | EDGE |
| RPM, grey cast iron, white cast iron | 12000 - 18000 RPM |
| RPM, hard non-ferrous metals | 5000 - 7000 RPM |
| RPM, soft non-ferrous metals | 12000 - 18000 RPM |
| Packaging unit | 1 pieces |
EDGE cut tungsten carbide burs have been specifically developed for precise work on edges. The special design allows the bur to run directly along edges without damaging the workpiece. Exact edges can be created in a single step - with either defined chamfers of 30° or 45°, or to a defined radius of 1/8". Rounding edges is a precautionary measure against corrosion according to: ISO 129443, ISO 85013, SOLAS XII/6.3 (Ref. T4/3.01 MSC.1/Circ.1198). Cone counterbore bur for producing precisely defined chamfers. Designed for counterboring and chamfering of defined 45° chamfer angles.
Special features
- Special design allows for precise handling.
- Safe and comfortable use.
- Exact edge shapes can be created in a single step.
- The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Recommendations for use
- Use the burs counterrotationally for quick stock removal. For a fine surface finish, run the bur back over the edges in the same direction of rotation.
- If possible, use burs with the EDGE cut with the PFERD compressed-air straight grinder PG 3/210 with the matching guide sleeve EFH PG 3/210.
- The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.
Workpiece materials
- Annealed cast iron
- Black annealed cast iron (GTS, GJMB)
- Brass
- Bronze
- Case-hardened steels
- Cast iron
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Hard non-ferrous metal
- Hardened, heat-treated steels over 370 HV (38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
- Plastics
- Steel
- Steel, cast steel
- Steels over 220 HV (> 95 HB)
- Steels up to 220 HV (< 95 HB)
- Steels up to 370 HV (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Tool steels
- White annealed cast iron (GTW, GJMW)
- Zinc
Applications
- Chamfering
- Deburring
- Milling
- Working on edges
- Working on edges (chamfering, rounding)
Compatible power tools
- Flexible shaft drive
- Tool machine
- Robot
- Stationary machines
- Straight grinder
| Angle: | 90 ° |
|---|---|
| Country of Origin: | DE |
Login