Diamond Grinding Disc, CC-GRIND-SOLID Diamond, 4-1/2" x 7/8", 36611585
PFERD TOOLS
$0.00
Product number:
36611585
Product information "Diamond Grinding Disc, CC-GRIND-SOLID Diamond, 4-1/2" x 7/8", 36611585"
Technical information
36611585
| Grit | D852 |
| Drive type | Angle grinder |
| Drive type 2 | Robot |
| Drive type 3 | Stationary machines |
| Dia. hole | 7/8 Inch |
| Max. RPM | 13300 |
| Pack qty | 1 |
The CC-GRIND®-SOLID-DIAMOND has been specially developed for applications on hard materials which cannot be machined with conventional tools made of aluminum oxide or silicon carbide. The CC-GRIND®-SOLID-DIAMOND is used for both wet and dry grinding. Matching clamping flange set (M14 thread) is included.
Special features
- Fast, aggressive grinding with maximum stock removal rate
- Easy and quick elimination of metal contamination due to diamond’s super-hard abrasive qualities
- Lower dust load due to the dimensional stability of the grinding tool (no tool wear)
Applications
- Deburring
- Descaling
- Grinding out
- Leveling
- Removing oxide layers
- Roughening
- Rounding
- Surface work
- Trimming
- Work on weld seams
- Working on edges
- Working on edges (chamfering, rounding)
Materials that can be worked
- Technical ceramics
- Tungsten carbide
- Wear-resistant coatings (powder metal alloys and hardfacing alloys)
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Nickel or titanium-based superalloys
- Scale
Recommendations for use
- Only use the face of the disc, not suitable for peripheral grinding (on edge).
- To extend the service life of the grinding disc on scale and wear-resistant coatings, reduce the cutting speed of the speed-adjustable angle grinder to 30 to 40 m/s.
- For the best results, use with the CC-GRIND®-SOLID/FLEX clamping flange set.
- When used on angle grinders with a 5/8-11 thread, the matching clamping flange set must be ordered separately.
| Pack Qty: | 1 |
|---|
Login
No reviews found. Share your insights with others.