Non-woven products
POLINOX® Unitized Disc
POLINOX Unitized DiscPOLINOX® unitized discs are used for face-down grinding with variable speed angle grinders. Ideal for larger surfaces. The compressed, non-woven material is bonded to a fiberglass back. POLINOX® unitized discs are made of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The different combinations of compression, fibers, grain, and the appropriate bond create non-woven products that offer a very good surface finish, high stock removal rate and long tool life. These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing. Medium-hard version with increased edge strength and service life for coarse deburring and cleaning applications.Special featuresCost-effective due to high abrasive performance and durability.Produces very good surface quality.Can be profiled as desired, enabling optimal adjustment to the contour.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useConsiderably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionMH (medium-hard)Dia. External4 1/2 inWidth1/2 inDrive typeAngle grinderGritfineMax. RPM10000Pack qty5
POLINOX® Unitized Wheel
POLINOX Unitized WheelPOLINOX® unitized wheels are made of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. This particular bond results in non-woven products that create very good surface finishes and have high stock removal rate and long service life. These properties come into play especially when deburring, blending, finishing, and polishing soft metals, alloyed and high-alloy steels, as well as titanium alloys. This version for straight grinders, flexible shafts and bench grinders is designed for working on smaller surfaces. Hard version with very high stock removal rate, good edge strength, and long service life for tough deburring and polishing applications.Special featuresCost-effective due to high abrasive performance and durability.Produces very good surface quality.Can be profiled as desired, enabling optimal adjustment to the contour.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useConsiderably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionH (hard)Dia. External2 inWidth1/8 inDrive typeFlexible shaft driveGritfineMax. RPM15300Pack qty10
POLINOX® Unmounted Flap Wheel
POLINOX Unmounted Flap WheelPOLINOX® unmounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. This flap structure improves stock removal and achieves a coarser surface finish.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External6 inWidth2 inDrive typeBench grinderGrit100Max. RPM4000Pack qty1
POLINOX® unmounted flap wheels, radial construction
POLINOX Non-Woven Finishing DrumPOLINOX® unmounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. Non-woven abrasive flaps are arranged radially, and the wheels are durable due to the dense packing of the flaps. Ideal for surface work. The product is designed for working on medium-sized surfaces with speed-adjustable angle grinders and fillet weld grinders, and can be mounted directly onto the drive system's spindle without the need for additional clamping devices.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.Technical informationDia. External4 inWidth2 inDrive typeAngle grinderGrit100Max. RPM6000Pack qty5
POLINOX® unmounted flap wheels, interleaved construction
POLINOX Non-Woven Finishing DrumPOLINOX® unmounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. This flap structure improves stock removal and achieves a coarser surface finish. The product is designed for working on medium-sized surfaces with speed-adjustable angle grinders and fillet weld grinders, and can be mounted directly onto the drive system's spindle without the need for additional clamping devices. This product is mainly used for work on large surfaces.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 inWidth2 inDrive typeAngle grinderGrit100Max. RPM6000Pack qty5
POLIVLIES® flap discs, aluminum oxide A
POLIVLIES Non-Woven Flap DiscFor universal coarse to fine grinding applications in industry and professional trades. These are ideal for large stainless steel (INOX) surfaces. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.Creates a consistently high surface quality throughout the entire service life, as new sharp abrasive material is constantly exposed.Conforms to contours due to high flexibility.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 6,000-7,000 SFPM.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersioncoarse, yellow-brownDia. External4 1/2 inWidth3/4 inDrive typeAngle grinderGrit100 GMax. RPM13300Pack qty5
POLIVLIES® flap discs, Ceramic oxide CO-COOL
POLIVLIES Non-Woven Flap DiscFor aggressive grinding with maximum stock removal rate on hard materials that do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding. These are ideal for large stainless steel (INOX) surfaces. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.Creates a consistently high surface quality throughout the entire service life, as new sharp abrasive material is constantly exposed.Conforms to contours due to high flexibility.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 6,000-7,000 SFPM.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 1/2 inWidth3/4 inDrive typeAngle grinderGritCO-COOL 60 / A 100 GMax. RPM13300Pack qty5
POLIVLIES® Hand Pad
POLIVLIES Hand PadDesigned for very fine grinding on small to large surfaces and contours, and for manually cleaning metal and painted surfaces. Achieve matte and satin-finished surfaces. Highly open structure.Special featuresConforms to contours due to high flexibility.Access hard-to-reach areas.ApplicationsCleaningStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)StoneThermoplasticsTitaniumTitanium alloysAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useCut to the necessary size if needed.Technical informationWidth6 inDrive typeManual applicationGrit100Pack qty20
POLIVLIES® Hook & Loop Disc
POLIVLIES Hook & Loop DiscPOLIVLIES® hook and loop discs are designed for grinding larger surfaces. The flexible system includes a POLIVLIES® hook and loop disc and the associated POLIVLIES® hook and loop disc holder for use on contours. The pre-punched holes mean the discs can be centered and used with various backing pads. These are ideal for large stainless steel (INOX) surfaces. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.Creates a consistently high surface quality throughout the entire service life, as new sharp abrasive material is constantly exposed.Conforms to contours due to high flexibility.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM.Use with POLIVLIES® hook and loop disc holder.Break out the pre-punched centering hole if needed.Technical informationVersioncoarse, yellow-brownDia. External4 1/2 inDrive typeAngle grinderGrit100 GMax. RPM5300Pack qty10
Short belts, non-woven type
POLIVLIES Surface Conditioning BeltDesigned for universal work on surfaces like metal tubes, e.g. removing rough grinding traces, removing oxidation, and light deburring work. Achieve matte and satin-finished surfaces. Short belts are compatible with commonly available belt grinders. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.High tear strength with optimum flexibility.Consistent work results due to high grain adhesion.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.For best performance, use at a recommended peripheral speed of 1,000-3,000 SFPM.SafetyFollow all safety instructions for abrasive belt use.Technical informationVersioncoarse, yellow-brownWidth1/4 inDrive typeBelt grinderGrit100 GPack qty10
Unitized Mounted Point, Ball Shape, A26
Unitized Mounted Point, Ball Shape, A26Multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The SiC version is ideal for demanding tasks on hard or sensitive materials. The ball shape KU is often used for contour grinding and backside deburring.Special featuresCost-effective due to high abrasive performance and durability.Produces very good surface quality.Can be profiled as desired, enabling optimal adjustment to the contour.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Stainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincRecommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.Considerably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationShapeBallVersionMW (medium-soft)Width3/5 inDia. shank1/4 InchDrive typeFlexible shaft driveGritF (fine)Max. RPM44500Pack qty10