POLINOX® mounted flap wheels, radial construction
POLINOX® mounted flap wheels, radial construction
POLINOX Mounted Flap WheelPOLINOX® mounted flap wheels are made of non-woven polyamide abrasive, into which abrasive grain is integrated. Non-woven abrasive flaps are arranged radially, and the wheels are durable due to the dense packing of the flaps. Ideal for surface work.Special featuresConforms to contours due to high flexibility.Cool grinding and low thermal load on the workpiece.The open structure and high flexibility of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.SafetyThe maximum permitted peripheral speed is 6,300 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External1 1/2 inWidth3/4 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit80Max. RPM15000Pack qty10