POLIVLIES® flap discs, Ceramic oxide CO-COOL
POLIVLIES® flap discs, Ceramic oxide CO-COOL
POLIVLIES Non-Woven Flap DiscFor aggressive grinding with maximum stock removal rate on hard materials that do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding. These are ideal for large stainless steel (INOX) surfaces. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.Creates a consistently high surface quality throughout the entire service life, as new sharp abrasive material is constantly exposed.Conforms to contours due to high flexibility.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 6,000-7,000 SFPM.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 1/2 inWidth3/4 inDrive typeAngle grinderGritCO-COOL 60 / A 100 GMax. RPM13300Pack qty5