Mounted points - Series B TOUGH
$0.00
Product information "Mounted points - Series B TOUGH"
Technical information
Mounted points - Series B TOUGH, B 52, 3/8 x 3/4", Grit 60, 1/8" shank
| Item number | 39102100 |
| Shape | B 52 |
| Dia. external | 3/8 Inch |
| Width | 3/4 Inch |
| Grit | 60 |
| Dia. shank | 1/8 Inch |
| Drive type | Flexible shaft drive, Straight grinder |
| Application | Finishing, Grouting, Deburring, Grinding out, Working on edges (chamfering, rounding), Work on weld seams, Leveling, Surface work |
| Material | Titanium, Nickel-based alloys (e.g. Inconell and Hastelloy), Cobalt-based alloys, High-temperature-resistant materials, Titanium alloys, Hardened, heat-treated steels over 370 HV (38 HRC) |
| Pack qty | 10 |
The TOUGH type is specifically designed for use on titanium materials, nickel-based and cobalt-based alloys, hardened steel components and built-up weld deposits. Its applications include weld dressing on repair welds and reworking on turbine blades during aircraft maintenance and regrinding of repair welds in tool and die-making. Series B mounted points are generally used on smaller or more delicate components, such as in tool and die construction. Due to the special shapes of series B mounted points, it is possible to grind in a variety of contours. Applications include grinding out slits and grooves in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.
Special features
- Cool grinding due to the easily broken-down grain mixture.
- High stock removal rate results in increased productivity.
- The self-sharpening properties of the ceramic oxide grain provide consistent stock removal rates throughout the life of the product.
Applications
- Deburring
- Finishing
- Grinding out
- Grouting
- Leveling
- Surface work
- Work on weld seams
- Working on edges (chamfering, rounding)
Materials that can be worked
- Titanium
- Titanium alloys
- Cobalt-based alloys
- Hardened, heat-treated steels over 370 HV (38 HRC)
- High-temperature-resistant materials
- Nickel-based alloys (e.g. Inconell and Hastelloy)
Recommendations for use
- TOUGH mounted points perform best at a peripheral speed of 6,000-9,800 SFPM.
Safety
- The maximum permitted rotational speed relates to the unsupported shank length of 1/2".
| Application: | Deburring, Finishing, Grinding out, Grouting, Leveling, Surface work |
|---|---|
| Drive Type: | Flexible shaft drive, Straight grinder |
| Material: | High-temperature-resistant materials, Titanium, Titanium alloys |
| PFERD TOOLS Type: | B 52 3,1 AWCO 60 J5V TOUGH |
| Pack Qty: | 10 |
Login