High-performance tungsten carbide burs, STEEL cut, 14° Taper bur with radius end – Shape L
$0.00
Product information "High-performance tungsten carbide burs, STEEL cut, 14° Taper bur with radius end – Shape L"
Technical information
PFERD Carbide Bur SL-6 14° Taper STEEL Cut 5/8" x 1-5/16" x 1/4" Shank
| Item number | 21725188 |
| Angle | 14 ° |
| Dia. External | 5/8 Inch |
| Dia. shank | 1/4 Inch |
| EDP no. | 25188 |
| Overall length | 3-1/4 Inch |
| Cut | STEEL |
| Packaging unit | 1 pieces |
With the innovative STEEL cut, PFERD has developed unique burs for steel and cast steel. These burs feature significantly increased aggressiveness and easy control for safe and precise work. Due to their incredibly high stock removal rate, STEEL cut burs help users save considerable time and money. 14° Taper bur with round radius end, shape L.
Special features
- Up to 50% higher stock removal rate on steel and cast steel in comparison to conventional double cut burs.
- Significantly increased aggressiveness, creates large chips, and has very good chip removal due to its innovative tooth design.
- Workpieces are protected due to significantly lower thermal load.
- The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Recommendations for use
- Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
- Observe the recommended rotational speed.
- The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.
- For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.
Safety notes
- Very high speeds can cause discoloration on the shank. This does not constitute a safety risk.
Workpiece materials
- Case-hardened steels
- Cast steel
- Hardened, heat-treated steels over 370 HV (38 HRC)
- Steel
- Steel, cast steel
- Steels over 220 HV (> 95 HB)
- Steels up to 220 HV (< 95 HB)
- Steels up to 370 HV (< 38 HRC)
- Tool steels
Applications
- Cutting out holes
- Deburring
- Leveling
- Milling
- Milling out
- Surface work
- Work on weld seams
Compatible power tools
- Flexible shaft drive
- Tool machine
- Robot
- Stationary machines
- Straight grinder
| Angle: | 14 ° |
|---|---|
| Country of Origin: | DE |
Login