High-performance tungsten carbide bur set, mixed cuts
$0.00
Product information "High-performance tungsten carbide bur set, mixed cuts"
Technical information
PFERD Carbide Bur Set 5 Piece STEEL, INOX, CAST, ALU, OMNI cuts Tree Shape 1/4" Shank
| Item number | 21726557 |
| Dia. shank | 1/4 Inch |
| EDP no. | 26557 |
| PFERD TOOLS type | TC-Set 5 pieces Mix |
| Packaging unit | 1 pieces |
This set contains five tungsten carbide burs with different high-performance cuts for use on the most important materials such as steel, stainless steel (INOX), aluminum, and cast iron. The sturdy plastic box protects the burs against dirt and damage. The burs are secured at the shanks, facilitating their selection and withdrawal. The box also has five unused slots for additional burs.
Special features
- Up to 100% higher stock removal rate on cast iron than conventional double cut burs, due to an innovative tooth design.
- Significantly increased aggressiveness, creates large chips, and has very good chip removal due to its innovative tooth design.
- Comfortable to use due to reduced vibration and less noise.
- The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Recommendations for use
- Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
- Observe the recommended rotational speed.
Workpiece materials
- Aluminum
- Annealed cast iron
- Black annealed cast iron (GTS, GJMB)
- Brass
- Bronze
- Case-hardened steels
- Cast iron
- Cast steel
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Hard aluminium alloys
- Hard non-ferrous metal
- Hard non-ferrous metal
- Hardened, heat-treated steels over 370 HV (38 HRC)
- Plastics
- Soft aluminium alloys
- Soft non-ferrous metal
- Stainless steel (INOX)
- Steel
- Steel materials with a hardness > 54 HRC
- Steels over 220 HV (> 95 HB)
- Steels up to 220 HV (< 95 HB)
- Steels up to 370 HV (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Tool steels
- Tough aluminium alloys
- White annealed cast iron (GTW, GJMW)
- Zinc
Applications
- Cutting out holes
- Deburring
- Leveling
- Milling
- Milling out
- Work on weld seams
Compatible power tools
- Flexible shaft drive
- Tool machine
- Robot
- Stationary machines
- Straight grinder
| Country of Origin: | DE |
|---|
Login