High-performance tungsten carbide bur set, TOUGH cut
$0.00
Product information "High-performance tungsten carbide bur set, TOUGH cut"
Technical information
PFERD Carbide Bur Set 5 Piece TOUGH Cut/Double Cut 1/4" Shank Plastic Case
| Item number | 21726551 |
| Dia. shank | 1/4 Inch |
| EDP no. | 26551 |
| Cut | TOUGH |
| PFERD TOOLS type | TOUGH |
| Packaging unit | 1 pieces |
The TOUGH cut has been specially designed for tough operating conditions such as in shipyards, foundries and steel construction. It is also ideal for all demanding production environments where frequent tooth breakages and other damage to conventional burs occur. This set contains five tungsten carbide burs for tough applications in the most common shapes and dimensions. The sturdy plastic box protects the burs against dirt and damage. The burs are secured at the shanks, facilitating their selection and withdrawal. The box also has five unused holes for additional burs.
Special features
- Innovative quick-mounting system guarantees convenient handling and cool grinding
- Minimized tooth chipping/breakage, splintering, and bur failures due to very robust, high-performance cut.
- Can also be used at a lower rotational speed.
- Due to their extreme impact resistance, they are an ideal option when an extended-shank bur is needed.
- The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Recommendations for use
- Observe the recommended rotational speed.
- The TOUGH cut can be used on materials up to 580 HV (54 HRC). For hard materials, it is recommended to test the bur on the same material before using on the actual workpiece.
- TOUGH cut carbide burs are also designed for high-impact applications when using shank extensions, for applications with a high surface contact angle, for work on narrow contours, and for applications where slower rotational speeds are used.
Workpiece materials
- Annealed cast iron
- Black annealed cast iron (GTS, GJMB)
- Case-hardened steels
- Cast iron
- Cast steel
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Hardened, heat-treated steels over 370 HV (38 HRC)
- Steel
- Steel materials with a hardness > 54 HRC
- Steel, cast steel
- Steels over 220 HV (> 95 HB)
- Steels up to 220 HV (< 95 HB)
- Steels up to 370 HV (< 38 HRC)
- Tool steels
- White annealed cast iron (GTW, GJMW)
Applications
- Cutting out holes
- Deburring
- Leveling
- Milling
- Milling out
- Surface work
- Work on weld seams
Compatible power tools
- Flexible shaft drive
- Tool machine
- Robot
- Stationary machines
- Straight grinder
| Country of Origin: | DE |
|---|
Login