Sanding Abrasives
Sanding sponge Set with 4 abrasive sides
Sanding sponge Set with 4 abrasive sidesThe sanding sponges are suitable for sanding down flat and irregular surfaces by hand. They are ideal for working on wood, paint and metal, drywall construction and for all types of small workpieces. The three-piece set can be used for coarse to fine grinding.Special featuresGood grain adhesion on the backing material.Washable, meaning it can be reused.Good abrasive performance.ApplicationsChamferingCleaningDeburringDerustingFinishingStep-by-step fine grindingGrinding outRemoving oxide layersPaint strippingRougheningSurface grindingWorking on edgesMaterials that can be workedAluminumAnnealed cast ironBrassBrickBronzeCase-hardened steelsCast steelChipboardCobalt-based alloysConcreteCopperGlassGraphite and synthetic carbonGrey/nodular cast iron (GG/GJL, GGG/GJS)HardwoodHardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)PlasticsReinforced concreteSoft aluminium alloysSoft non-ferrous metalSoft woodStainless steel (INOX)SteelSteel, cast steelThermoplasticsTilesTitaniumTitanium alloysWoodTechnical informationWidth4 inPack qty1
Sanding sponge with 4 abrasive sides
Sanding sponge with 4 abrasive sidesIdeal for working on wood, paint and metal and for drywall construction in manual applications.Special featuresGood grain adhesion on the backing material.Good abrasive performance.High edge stability.ApplicationsChamferingCleaningDeburringDerustingFinishingStep-by-step fine grindingGrinding outRemoving oxide layersPaint strippingRougheningSurface grindingWorking on edgesMaterials that can be workedSoft woodStainless steel (INOX)SteelSteel, cast steelThermoplasticsTilesTitaniumTitanium alloysWoodZincConcreteAluminumAnnealed cast ironBrassBrickBronzeCase-hardened steelsCast steelChipboardCobalt-based alloysCopperGlassGraphite and synthetic carbonGrey/nodular cast iron (GG/GJL, GGG/GJS)HardwoodHardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)PlasticsReinforced concreteSoft aluminium alloysTechnical informationWidth4 inDrive typeManual applicationGrit60Pack qty5
Shop Roll Holder Wall Mount, Single Roll, For 1"
Shop Roll Holder Wall Mount, Single Roll, For 1"Holder for wall-mounting: for storing and tearing off to the desired length. Designed for rolls with 1", 1-1/2", 2" widths and 15" diameters.Special featuresAllows shop rolls to be properly stored.Technical informationDrive typeManual applicationPack qty1
Shop Roll, Flexible Light Duty
Shop Roll, Flexible Light DutyThe cloth-backed type is ideal for universal, heavy-duty use on alloyed and non-alloyed steels, as well as non-ferrous metals. The carton has a tear-off edge for separating the sections of abrasive belt at the workplace.Special featuresConforms to contours due to high flexibility.Low wear due to high tear strength and very high grain adhesion.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTrim to the necessary size as needed.Technical informationWidth1 inDrive typeManual applicationGrit50Pack qty1
Short belts, non-woven type
POLIVLIES Surface Conditioning BeltDesigned for universal work on surfaces like metal tubes, e.g. removing rough grinding traces, removing oxidation, and light deburring work. Achieve matte and satin-finished surfaces. Short belts are compatible with commonly available belt grinders. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.High tear strength with optimum flexibility.Consistent work results due to high grain adhesion.ApplicationsDeburringStep-by-step fine grindingLevelingSharpeningWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.For best performance, use at a recommended peripheral speed of 1,000-3,000 SFPM.SafetyFollow all safety instructions for abrasive belt use.Technical informationVersioncoarse, yellow-brownWidth1/4 inDrive typeBelt grinderGrit100 GPack qty10
Spanner Wrench for Backing Pad Clamping Nut
Spanner Wrench for Backing Pad Clamping NutPFERD offers different face pin spanners (STL) with different widths across flats (SW).Technical informationDrive typeAngle grinderPack qty1
Textile Wheel for Angle Grinders
Textile Wheel for Angle GrindersPoliflex® fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances. They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and die-making applications. Poliflex® fine grinding tools with the TX bond are manufactured with standard aluminum oxide. The textile fabric inlays make the TX bond a very hard, sturdy bond. Suitable for use on edges.Special featuresProduces a fine, matte surface finish.Produces very good surface quality.Cost-effective due to durability and high stock removal rate.Highly convenient to use due to precise concentricity.ApplicationsStep-by-step fine grindingMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)TitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperHardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useDepending on the intended use, profile using a dressing diamond or ceramic dressing stone at a low rotational speed.For best performance, use at a recommended peripheral speed of 4,000-6,000 SFPM.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationBondTXDia. External4 1/2 inWidth1/4 inDrive typeAngle grinderGrit36Max. RPM13300Pack qty10
Unitized Mounted Point, Ball Shape, A26
Unitized Mounted Point, Ball Shape, A26Multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The SiC version is ideal for demanding tasks on hard or sensitive materials. The ball shape KU is often used for contour grinding and backside deburring.Special featuresCost-effective due to high abrasive performance and durability.Produces very good surface quality.Can be profiled as desired, enabling optimal adjustment to the contour.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workMaterials that can be workedAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Stainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincRecommendations for useFor the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.Considerably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationShapeBallVersionMW (medium-soft)Width3/5 inDia. shank1/4 InchDrive typeFlexible shaft driveGritF (fine)Max. RPM44500Pack qty10
Unmounted Flap Wheel
Unmounted Flap WheelWith unmounted flap wheels, coated abrasive flaps are arranged radially around the core in a fan-like structure. The flexible flaps perfectly adapt to surface contours. The abrasive grain is embedded in the sturdy, flexible cloth backing material with a resinoid bond. In ISO 5429, unmounted flap wheels are designated as "flap wheels." For universal applications from coarse to fine grinding.Special featuresConforms to contours due to high flexibility.Consistently high stock removal rate throughout the entire service life as new, aggressive abrasive is constantly exposed.Can be used face-down very close to edges and in corners thanks to special clamping system.ApplicationsDeburringStep-by-step fine grindingLevelingStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useFlap wheel wear and the thermal load on the workpiece are reduced by decreasing the contact pressure and peripheral speed, and by adding grinding oil.Stock removal rate should be increased by using a coarser grit, not by increasing the contact pressure. This avoids unnecessary flap wheel wear and prevents the thermal load of the workpiece.Increasing the speed results in a slightly finer surface quality. An increase in contact pressure results in a slightly coarser surface. The softer the workpiece material, the coarser the resulting surface (when using the same grit size).For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.For the best results, use a power tool with 1,000–1,500 watts.SafetyUnmounted flap wheels should only be used with the appropriate clamping flanges.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.The contact pressure has to be reduced significantly when the optimum rotational speed is exceeded.The maximum permitted peripheral speed is 9,800 SFPM.Technical informationDia. External4 inWidth1 inDrive typeFlexible shaft driveGrit40Max. RPM9500Pack qty2
Velcro-Backed Abrasive Disc NET Type
Velcro-Backed Abrasive Disc NET TypeHook and loop-backed NET type abrasive discs feature a netting fabric, to which the abrasive grain is bonded with a high-performance bond system, making the discs very durable. For dust-free, universal grinding work on medium-sized and large surfaces.Special featuresVery long service life and high stock removal rate.Achieve very fine and even surface qualities.Dust-free work thanks to good extraction capability.No loading due to netting structure.Durable netting structure with high tear strength and edge stability.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumBrassBronzeCast steelCopperHardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useUse the extraction connection on the machine to effectively remove the grinding dust.Technical informationDia. External5 inDrive typeEccentric orbital sanderGrit80Pack qty25
Wheel Reducing Flange (Pair)
Wheel Reducing Flange (Pair)For mounting unmounted flap wheels and POLINOX® grinding wheels on drive spindles. The clamping flanges are designed to lie countersunk in the tool.Special featuresCan be adapted to an existing drive spindle by drilling.Can be used face-down very close to edges and in corners thanks to special clamping system.Technical informationDia. External1 1/2 inDrive typeBench grinderPack qty1