Abrasives
Carbide Bur Set 5 Piece STEEL Cut Plastic Case
This set contains five tungsten carbide burs for processing steel and cast steel. These burs are the most common shapes and dimensions. The sturdy plastic box protects the burs against dirt and damage. The burs are secured at the shanks, facilitating their selection and withdrawal. The box also has five unused slots for additional burs.
Carbide Bur Set 5 Piece STEEL, INOX, CAST, ALU, OMNI cuts Tree Shape
This set contains five tungsten carbide burs with different high-performance cuts for use on the most important materials such as steel, stainless steel (INOX), aluminum, and cast iron. The sturdy plastic box protects the burs against dirt and damage. The burs are secured at the shanks, facilitating their selection and withdrawal. The box also has five unused slots for additional burs.
Carbide Bur Set 5 Piece TOUGH Cut/Double Cut Plastic Case
The TOUGH cut has been specially designed for tough operating conditions such as in shipyards, foundries and steel construction. It is also ideal for all demanding production environments where frequent tooth breakages and other damage to conventional burs occur. This set contains five tungsten carbide burs for tough applications in the most common shapes and dimensions. The sturdy plastic box protects the burs against dirt and damage. The burs are secured at the shanks, facilitating their selection and withdrawal. The box also has five unused holes for additional burs.
CC-GRIND grinding disc mounting flange set
ShapeSFS SOLID/FLEXPack qty1CC-GRIND®The CC-GRIND® clamping flange set optimally aligns the CC-GRIND® SOLID and CC-GRIND® FLEX in the angle grinder protective guard. This means that the grinding discs can be positioned so that they are particularly flat against the workpiece, therefore maximizing efficiency. The black backing pad is placed on the original mounting flange of the angle grinder. The silver flange nut replaces the original flange nut.
Chip Brush, White Bristle, 1-3/4" Trim Wooden Handle
High volume, cost-effective brushes feature natural fiber for painting, gluing, and applying coatings.
Flat Head Drive Arbor For Tube Center Brushes
Technical informationShank Diameter1/4 InchPack Qty1This arbor enables the use of wheel brushes with arbor hole on power tools with collets, e.g. electric straight grinders and flexible shaft drives. The arbors enable one or several brushes to be mounted next to one another.AdvantagesMachined metal components for accurate fit.SafetyThis arbor is for brushes with diameters up to 8"."
Circular Mounted End Brush
Technical informationBrush Diameter1 1/2 InchFilament MaterialStainless steel wire (INOX)Wire Diameter0.008 InchShank Diameter1/4 InchMax. RPM14000 RPMPack Qty10Excellent for light to medium-duty cleaning and deburring work on uneven surfaces. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.AdvantagesThe brush is degreased and does not leave any oil residue on the workpiece.Highly flexible, enabling optimal adaptation to the workpiece contour.The special arrangement of the filament material means it can be used for face-side and radial brushwork at the same time.Very corrosion-resistant.Creates fine surfaces.ApplicationsCleaningDeburringDerustingRemoving heat discolourationRemoving oxide layersPaint strippingRougheningMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)TitaniumTitanium alloysAluminumBronzeCobalt-based alloysHard non-ferrous metalHigh-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Drive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Cloth Backed Abrasive Sheet
Cloth Backed Abrasive SheetThe brown cloth-backed sheet is ideal for universal, heavy-duty use on alloyed and non-alloyed steels, as well as non-ferrous metals. The cloth-backed abrasive sheets comply with ISO 21948.Special featuresHigh grain adhesion on very flexible cloth.High abrasive performance.Oil and kerosene-resistant.High tear strength with optimum quality.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTear to the necessary size as needed.Technical informationWidth9 inDrive typeManual applicationGrit40Pack qty50
Cloth Ring, Sisal Fabric
Cloth Ring, Sisal FabricCloth rings are used for pre-polishing and high-gloss polishing with polishing pastes. If a very smooth surface finish is desired, use several or even all types successively. ST (sisal cloth) type for coarse pre-polishing.Special featuresConforms to contours due to high flexibility.Can be freely shaped, meaning they can be used on complicated geometries.ApplicationsPolishingMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for usePre-polishing of steel and INOX: Cloth rings ST with green polishing paste.Pre-polishing of aluminum and brass: Cloth rings ST with gray polishing paste.Pre-polishing of non-ferrous metals: Cloth rings ST with brown polishing paste.Type ST cloth rings achieve their best performance at a recommended peripheral speed of 2,000–3,000 SFPM.Technical informationVersionSTDia. External3 inWidth3/4 inDrive typeFlexible shaft driveMax. RPM7500Pack qty5
Coil Spring Brush
Technical informationBrush Diameter3/8 InchFilament MaterialSteel wire (ST)Wire Diameter0.014 InchShank Diameter1/4 InchTrim Length1 InchMax. RPM1800 RPMPack Qty10For cleaning deep cavities, tubing, and more. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. Steel wire is temperature-resistant up to 600°F.AdvantagesParticularly long trim length for optimal access to hard-to-reach areas.Long service life through use of PFERD special wire.Creates fine surfaces.ApplicationsCleaningDeburringDerustingRemoving oxide layersPaint strippingRougheningMaterials that can be workedSteel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)WoodCast ironCast steelDrive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm. The maximum permissible rotational speed is 1,800 rpm and should not be exceeded.
COMBICLICK® Backing Pad, Medium Hardness
COMBICLICK Backing Pad, Medium HardnessThis backing pad allows COMBICLICK® products to be used on commercially available angle grinders. The COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high airflow, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Hardness CC-GT (medium) = blackSpecial featuresThe geometry of the cooling slots significantly reduces the thermal load.High productivity due to minimized disc change times.Innovative quick-mounting system guarantees convenient handling with fast disc changes.Recommendations for useCC-H-GT backing pads are mainly used to work on stainless steel (INOX). They have a very high edge strength, which enables a higher contact pressure.SafetyThe maximum permitted peripheral speed is 15,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionmediumDia. External4 1/2 - 5 inDrive typeAngle grinderMax. RPM13300Pack qty1
COMBICLICK® Backing Pad, Hard Hardness
This backing pad allows COMBICLICK® products to be used on commercially available angle grinders. The COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high airflow, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Hardness CC-H-GT (hard) = blue
COMBICLICK® Backing Pad, Hard Hardness
This backing pad allows COMBICLICK® products to be used on commercially available angle grinders. The COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high airflow, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Hardness CC-H-GT (hard) = blue
COMBICLICK® Backing Pad, Medium Hardness
This backing pad allows COMBICLICK® products to be used on commercially available angle grinders. The COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high airflow, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Hardness CC-GT (medium) = black
COMBICLICK® Backing Pad, Medium Hardness
This backing pad allows COMBICLICK® products to be used on commercially available angle grinders. The COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high airflow, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Hardness CC-GT (medium) = black
COMBICLICK® Backing Pad, Medium Hardness
This backing pad allows COMBICLICK® products to be used on commercially available angle grinders. The COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high airflow, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Hardness CC-GT (medium) = black
COMBICLICK® Backing Pad, Soft
This backing pad allows COMBICLICK® products to be used on commercially available angle grinders. The COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high airflow, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Hardness CC-S-GT (soft) = grey
COMBICLICK® CONTOUR Fiber Disc
COMBICLICK CONTOUR Fiber DiscThe COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. PFERD fiber discs are manufactured in accordance with ISO 16057 in shape A1 version F under the designation "vulcanized fiber disc". Very flexible and adaptable due to scalloped-edge outer contour shape. Helps prevent cutting into the workpiece. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding.Special featuresInnovative quick-mounting system guarantees convenient handling and cool grindingHigh productivity due to long service life and very high stock removal rate.Consistent surface finish resulting from high-quality abrasives.Extremely quick and easy disc changes reduce process costs.With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.ApplicationsDeburringStep-by-step fine grindingLevelingSurface workWork on weld seamsWorking on edgesMaterials that can be workedStainless steel (INOX)TitaniumAnnealed cast ironBronzeCobalt-based alloysGrey/nodular cast iron (GG/GJL, GGG/GJS)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse COMBICLICK® fiber discs with COMBICLICK® backing pads on commercially available angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.Use the CC-GT backing pad with M14 or 5/8" thread to maintain flexibility at the edge of the fibre discs.SafetyThe maximum permitted peripheral speed is 15,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External5 inDrive typeAngle grinderGrit120 CONTOURMax. RPM12200Pack qty25
COMBICLICK® Felt Disc
The COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Designed for polishing with polishing paste bars, grinding pastes or diamond polishing pastes in face-down grinding on medium-sized and large surfaces.
COMBICLICK® Felt Disc
COMBICLICK Felt DiscThe COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Designed for polishing with polishing paste bars, grinding pastes or diamond polishing pastes in face-down grinding on medium-sized and large surfaces.Special featuresDurability makes this cost-effective.Precise handling throughout product lifespan due to high dimensional stability.Innovative quick-mounting system guarantees convenient handling and cool grindingExtremely quick and easy disc changes reduce process costs.With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.ApplicationsPolishingMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse COMBICLICK® felt discs with COMBICLICK® backing pads on variable speed angle grinders.For the best performance, use with a recommended peripheral speed of 1,000-2,000 SFPM. This provides an ideal compromise between polishing performance, thermal load on the workpiece and tool wear.When applying a different polishing paste, use a new unused felt disc.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 1/2 inDrive typeAngle grinderMax. RPM10500Pack qty5
COMBICLICK® Fiber Disc
COMBICLICK Fiber DiscThe COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. PFERD fiber discs are manufactured in accordance with ISO 16057 in shape A1 version F under the designation "vulcanized fiber disc". For universal grinding work from coarse to fine grinding in industry and professional trades.Special featuresInnovative quick-mounting system guarantees convenient handling and cool grindingHigh productivity due to long service life and very high stock removal rate.Consistent surface finish resulting from high-quality abrasives.Extremely quick and easy disc changes reduce process costs.With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.ApplicationsDeburringStep-by-step fine grindingLevelingSurface workWork on weld seamsWorking on edgesMaterials that can be workedSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useUse COMBICLICK® fiber discs with COMBICLICK® backing pads on commercially available angle grinders.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyThe maximum permitted peripheral speed is 15,800 SFPM.For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationDia. External4 1/2 inDrive typeAngle grinderGrit24Max. RPM13300Pack qty25
COMBICLICK® Fiber Disc, Ceramic oxide CO-COOL
The COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. PFERD fiber discs are manufactured in accordance with ISO 16057 in shape A1 version F under the designation "vulcanized fiber disc". For aggressive grinding with maximum stock removal rate on hard materials that do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent loading, and result in cooler grinding.
COMBICLICK® POLICLEAN® PLUS Disc
COMBICLICK POLICLEAN PLUS DiscThe PLUS version (blue) has a considerably higher stock removal rate and a very good service life, and it is very aggressive.Special featuresInnovative quick-mounting system guarantees convenient handling and cool grindingExtremely quick and easy disc changes reduce process costs.With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.High edge strength due to extreme durability.The open structure of the non-woven material prevents loading.ApplicationsCleaningRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperElastomersFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useFor the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionPCLD PLUSDia. External4 1/2 inDrive typeFlexible shaft drivePack qty5
COMBICLICK® Surface Conditioning Disc Hard
COMBICLICK Surface Conditioning Disc HardThe COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Designed for universal work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation, and light deburring work. Achieve matte and satin-finished surfaces.Special featuresInnovative quick-mounting system guarantees convenient handling and cool grindingExtremely quick and easy disc changes reduce process costs.With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.Low wear due to high tear strength.The open structure of the non-woven material prevents loading.ApplicationsCleaningDeburringStep-by-step fine grindingRougheningStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysAluminumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useUse COMBICLICK® non-woven discs with COMBICLICK® backing pads on variable speed angle grinders.For the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.Adding oil or water during grinding results in a finer finish, cooler grinding, and longer service life.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.Technical informationVersionfine, blueDia. External4 1/2 inDrive typeAngle grinderGrit240 FMax. RPM10500Pack qty10