Grinding Abrasives
Die Grinder Cut-Off Wheel, SG STEELOX
ShapeEHT / 41 / T1AbrasiveAluminum oxide ADrive typeFlexible shaft drive, Straight grinderMax. RPM30000Pack qty50Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. PFERD offers small cut-off wheels in various dimensions for straight grinders. These general-purpose cut-off wheels are designed to cut steel, stainless steel (INOX), cast iron, aluminum and other materials. General-purpose cut-off wheel for use on straight grinders. High cutting performance and maximum service life. PFERD is a global leader in performance and safety of thin cut-off wheels. We maximize the performance and benefits for our users with: Thinner, faster cutting with minimal burr formation. Highest possible productivity and Comfort and safety. Intensive research, development and targeted implementation in our state-of-the-art production facilities guarantee the highest quality and compliance with safety standards.AdvantagesIdeal for hard-to-reach areas.General-purpose cut-off wheel for many different materials.Fast work due to high cutting performance.Maximum economic efficiency due to maximum durability.ApplicationsCutting of profilesCutting of sheet metalCutting of solid materialCutting out holesMaterials that can be workedStainless steel (INOX)SteelAluminumCast ironNickel-based alloys (e.g. Inconell and Hastelloy)Nickel or titanium-based superalloysOther non-ferrous metalsSafetyNote the maximum rotational speed for the cut-off wheel and arbor – adhere to whichever speed is lower.
Die Grinder
Pack qty1Accessory for mounting small cut-off wheels on straight grinders. Rugged product with maximum shank fracture resistance.SafetyNote the maximum rotational speed for the cut-off wheel and arbor – adhere to whichever speed is lower.
DS Multi Power Carbide Cut-off Wheel
General-purpose cut-off wheel for effective cutting of many different materials, such as wood with embedded nails, plastics (e.g. pipes), non-ferrous metals and drywall construction materials. The cutting edge made of sharp tungsten carbide grains achieves clean, precise cuts.
DS Multi Power Carbide Cut-off Wheel, 5" x 0.045 x 7/8, retail packaging
Shape1A1R / DSDrive typeAngle grinderDrive type 2Cordless angle grinderDia. hole7/8 InchMax. RPM12200Pack qty1DS Multi Power Carbide Cut-off Wheel, 5" x 0.045 x 7/8, retail packagingGeneral-purpose cut-off wheel for effective cutting of many different materials, such as wood with embedded nails, plastics (e.g. pipes), non-ferrous metals and drywall construction materials. The cutting edge made of sharp tungsten carbide grains achieves clean, precise cuts.Special featuresIdeal choice for a variety of materials.Optimum cutting speed due to consistent diameter and high ease of cutting.Made in Germany.Long service life due to unique high-quality bonding of the tungsten carbide grain to the steel body.ApplicationsCutting of pipesCutting of profilesCutting of sheet metalCutting of solid materialCutting of thin sheet metal and profilesAbrasive materialsMaterials that can be workedAluminumBrassBrickBronzeChipboardCopperThermosetting plasticsElastomersFibre-reinforced thermosetting plastics (GRP, CRP)Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ? 40 %Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %Graphite and synthetic carbonHard aluminium alloysHard non-ferrous metalHardwoodOther non-ferrous metalsOtherPlasticsSoft aluminium alloysSoft non-ferrous metalSoft stoneSoft woodStainless steel (INOX)SteelStoneThermoplasticsTilesTough aluminium alloysWoodZincConcrete
Flap Disc Set, 4-1/2"x7/8, ZPSF EXTRA STEELOX, 40/60/80/120Grit
ShapePFF / A / T27AbrasiveZirconia, ZDrive typeAngle grinder, Cordless angle grinderMax. RPM12200Pack qty1This set contains four POLIFAN flap discs for steel and stainless steel (INOX). High stock removal rate and good durability.AdvantagesFast work and high economic efficiency due to the aggressive stock removal rate.Very good durability due to high flap density.Also works well with low-power angle grinders.ApplicationsChamferingDeburringSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel
Flap Disc Set, ZPSF EXTRA STEELOX, Flat
This set contains four POLIFAN flap discs for steel and stainless steel (INOX). High stock removal rate and good durability.
Z START STEELOX, Flap Disc
Technical informationThe START range offers reliable PFERD TOOLS quality for trade and assembly work. For grinding and blending steel and stainless steel (INOX). Zirconia abrasive for long service life.
Flap Disc, A SG STEELOX
ShapePFF / A / T27AbrasiveAluminum oxide AGrit40Drive typeAngle grinderMax. RPM15300Pack qty10Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. POLIFAN flap disc for steel and stainless steel (INOX). High stock removal rate and very long service life.AdvantagesFast work and high economic efficiency due to the high stock removal rate.Very long service life.ApplicationsStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel
Flap Disc, A SGP CURVE ALU
ShapePFR CURVEAbrasiveA-COOLGrit40Drive typeAngle grinderMax. RPM13300Pack qty10POLIFAN-CURVESpecial Line SGP includes products engineered for specific tasks that offer the user key advantages over conventional products. This quality line also includes products that, due to their particularly high performance, offer ultimate economic efficiency. The patented flap disc POLIFAN-CURVE has been specially developed for work on fillet welds. It is the only flap disc in the world featuring a radial configuration of flaps allowing for grinding with all surfaces of the disc. PFERD’s POLIFAN CURVE is patented in many countries across the globe. Special flap disc for work on fillet welds on aluminum.AdvantagesHigh productivity due to high stock removal rate.Excellent service life when working on fillet welds.Precise and optimum grinding of the fillet weld geometry.ApplicationsChamferingDeburringWork on weld seamsWork on fillet weldsMaterials that can be workedAluminumOther non-ferrous metalsRecommendations for useAfter the abrasive on the outer edge of the disc has worn down, the disc can continue to be used as a conventional flap disc.For fillet weld radii > 5/16” or throat thickness > 1/4” with 90° joint, width at the radius: 9/16” with diameter 6” or 7”.
Flap Disc, A-COOL SG INOX+ALU
ShapePFC / B / T29AbrasiveA-COOLGrit40Drive typeAngle grinderMax. RPM13300Pack qty10Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. POLIFAN flap disc with particularly cool grinding on materials with poor thermal conduction such as stainless steel (INOX) and aluminum.AdvantagesLess heat build-up in the workpiece compared with other flap discs.Special top-sized abrasive material prevents loading on soft metals such as aluminum.ApplicationsChamferingDeburringStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)AluminumOther non-ferrous metalsRecommendations for useUse only grit sizes 40 and 60 for aluminum.
Flap Disc, CO SGP CURVE STEELOX
ShapePFR CURVEAbrasiveCO-COOLGrit60Drive typeAngle grinderMax. RPM12200Pack qty10POLIFAN-CURVESpecial Line SGP includes products engineered for specific tasks that offer the user key advantages over conventional products. This quality line also includes products that, due to their particularly high performance, offer ultimate economic efficiency. The patented flap disc POLIFAN-CURVE has been specially developed for work on fillet welds. It is the only flap disc in the world featuring a radial configuration of flaps allowing for grinding with all surfaces of the disc. PFERD’s POLIFAN CURVE is patented in many countries across the globe. High-performance flap disc for achieving fine finishes on steel and stainless steel (INOX).AdvantagesHigh productivity due to high stock removal rate.Excellent service life when working on fillet welds.Precise and optimum grinding of the fillet weld geometry.ApplicationsChamferingDeburringWork on weld seamsWork on fillet weldsMaterials that can be workedStainless steel (INOX)SteelRecommendations for useAfter the abrasive on the outer edge of the disc has worn down, the disc can continue to be used as a conventional flap disc.For fillet weld radii > 3/16” or throat thickness ≤ 1/4” with 90° joint, width at the radius: 7/16” with diameter 6”.
Flap Disc, CO-COOL SG STEELOX
ShapePFF / A / T27AbrasiveCO-COOLGrit40Drive typeAngle grinderMax. RPM13300Pack qty10Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. POLIFAN flap disc with particularly cool grinding for materials that are difficult to machine such as high-alloy and rust-resistant steel, nickel-based alloys or titanium alloys.AdvantagesThe self-sharpening action of the ceramic oxide grain guarantees optimal results, even on materials that are difficult to grind.Less heat build-up in the workpiece compared with other flap discs.ApplicationsChamferingDeburringStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)SteelHard aluminium alloysMill scaleNickel-based alloys (e.g. Inconell and Hastelloy)Nickel or titanium-based superalloysScale
Flap Disc, CO-FREEZE SG INOX
ShapePFF / A / T27AbrasiveCO-FREEZEGrit36Drive typeAngle grinderMax. RPM13300Pack qty10Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. POLIFAN flap disc designed for stainless steel (INOX) with ultra-cool grinding. Due to the ceramic oxide CO with cooling topsizing (FREEZE), there is no heat discoloration – no reworking is required.AdvantagesThe FREEZE topsizing significantly reduces heat build-up in the workpiece compared with standard flap discs.Fast work and high economic efficiency due to the aggressive stock removal rate.Maximum aggressiveness over the entire service life.Excellent durability.Sparks are minimized. Damage to stainless steel workpieces from sparks is almost entirely eliminated.ApplicationsStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)Cobalt-based alloysNickel-based alloys (e.g. Inconell and Hastelloy)Nickel or titanium-based superalloysRecommendations for useDuring use of the POLIFAN CO-FREEZE SG INOX, the flaps exhibit an unusual wear pattern after just a few seconds. Highly effective fillers form a shiny cooling film on the flaps (this should not be mistaken for “glazing”). This provides the basis for ultracool grinding.
Flap Disc, Z PSF EXTRA STEELOX
ShapePFF / A / T27AbrasiveZirconia, ZGrit36Drive typeAngle grinderMax. RPM13300Pack qty10Universal Line PSFChoose the Universal Line PSF for processing the most common materials. These robust products achieve good results with increased economic efficiency. POLIFAN flap disc for steel and stainless steel (INOX). Aggressive stock removal rate and good service life.AdvantagesFast work and high economic efficiency due to the aggressive stock removal rate.Very good durability due to high flap density.Also works well with low-power angle grinders.ApplicationsChamferingDeburringStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel
Flap Disc, Z PSF STEELOX
ShapePFC / B / T29AbrasiveZirconia, ZGrit40Drive typeAngle grinder, Cordless angle grinderMax. RPM13300Pack qty10Universal Line PSFChoose the Universal Line PSF for processing the most common materials. These robust products achieve good results with increased economic efficiency. POLIFAN flap disc for steel and stainless steel (INOX). Aggressive stock removal rate and good service life. The Bosch X-LOCK system for angle grinders enables you to change products quickly and easily. Instead of a round center hole, the X-LOCK system features an X-shaped contour, which allows the product to be fixed on the angle grinder in a form-fitting manner. This means different kinds of products can be clamped in a reliable manner in a very short space of time. The unique system meets the highest of quality and safety standards and can withstand rough and harsh application conditions. X-LOCK from Bosch is the world's first quick-changing system for angle grinders: Position the tool in the X-LOCK holder, click it into place – and you're ready! It's never been so easy to change accessories on angle grinders. X-LOCK is creating a new standard which makes professionals’ lives easier and increases their productivity. Bosch Power Tools relies on strong partners like PFERD. PFERD has developed the principle for connecting the X-LOCK punched part with the bonded abrasive, flap discs and brushes and created the conditions to enable them to be produced industrially.AdvantagesWith X-LOCK arbor for quick and easy product changingSecure fixing as the product audibly clicks into place.POLIFAN flap discs with X-LOCK can also be used on traditional angle grinders with M14 and 5/8"-11 threads.Fast work and high economic efficiency due to the high stock removal rate.Durable.Also works well with low-power angle grinders.ApplicationsChamferingDeburringStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)SteelRecommendations for usePlace the product on the X-LOCK quick-change system of your angle grinder and secure it by lightly pressing it down. The product will audibly click into place.Release the product by using the lever.
Flap Disc, Z PSF TRIM STEELOX
ShapePFF / A / T27AbrasiveZirconia, ZGrit40Drive typeAngle grinderMax. RPM13300Pack qty10Universal Line PSFChoose the Universal Line PSF for processing the most common materials. These robust products achieve good results with increased economic efficiency. POLIFAN flap disc for steel and stainless steel (INOX). Aggressive stock removal rate and good service life. POLIFAN flap disc with trimmable plastic backer.AdvantagesFast work and high economic efficiency due to the aggressive stock removal rate.Very good durability due to high flap density.Also works well with low-power angle grinders.Easily trimmable product.ApplicationsChamferingDeburringStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)SteelRecommendations for useTrim the flap disc on sharp metal edges, files, or with cutting inserts.Trimming should only be done at a 45° contact angle of.Press the disc carefully on to the workpiece and increase the pressure until a chip is formed. Keep the pressure until the disc has been trimmed to the desired dimension.Plastic backer can be trimmed to expose unused coated material once the outside edge has worn down.
Flap Disc, Z SG POWER STEELOX
ShapePFC / B / T29AbrasiveZirconia, ZGrit40Drive typeAngle grinderMax. RPM12200Pack qty10Performance Line SGThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. The POLIFAN POWER flap disc stands out due to its aggressive stock removal rate and excellent service life while achieving maximum economic efficiency. It is the best conventional flap disc for steel. For demanding requirements, the high-performance POLIFAN-POWER flap disc is the first choice for the machining of steel. This versatile POLIFAN flap disc offers an optimal combination of outstanding service life and extremely high stock removal rates. The Bosch X-LOCK system for angle grinders enables you to change products quickly and easily. Instead of a round center hole, the X-LOCK system features an X-shaped contour, which allows the product to be fixed on the angle grinder in a form-fitting manner. This means different kinds of products can be clamped in a reliable manner in a very short space of time. The unique system meets the highest of quality and safety standards and can withstand rough and harsh application conditions. X-LOCK from Bosch is the world's first quick-changing system for angle grinders: Position the tool in the X-LOCK holder, click it into place – and you're ready! It's never been so easy to change accessories on angle grinders. X-LOCK is creating a new standard which makes professionals’ lives easier and increases their productivity. Bosch Power Tools relies on strong partners like PFERD. PFERD has developed the principle for connecting the X-LOCK punched part with the bonded abrasive, flap discs and brushes and created the conditions to enable them to be produced industrially.AdvantagesWith X-LOCK arbor for quick and easy tool changing.Secure fixing as the product audibly clicks into place.POLIFAN flap discs with X-LOCK can also be used on traditional angle grinders with M14 and 5/8"-11 threads.Fast work and maximum economic efficiency due to the aggressive stock removal rate.Maximum aggressiveness over the entire service life.Excellent durability.ApplicationsChamferingDeburringWork on weld seamsMaterials that can be workedStainless steel (INOX)SteelRecommendations for useCan also be used for surface grinding on steel.Place the product on the X-LOCK quick-change system of your angle grinder and secure it by lightly pressing it down. The product will audibly click into place.Release the product by using the lever.
Flap Disc, Z SGP CURVE STEELOX
ShapePFR CURVEAbrasiveZirconia, ZGrit40Drive typeAngle grinderMax. RPM12200Pack qty2POLIFAN-CURVESpecial Line SGP includes products engineered for specific tasks that offer the user key advantages over conventional products. This quality line also includes products that, due to their particularly high performance, offer ultimate economic efficiency. The patented flap disc POLIFAN-CURVE has been specially developed for work on fillet welds. It is the only flap disc in the world featuring a radial configuration of flaps allowing for grinding with all surfaces of the disc. PFERD’s POLIFAN CURVE is patented in many countries across the globe. High-performance flap disc for maximum stock removal on steel and stainless steel (INOX).AdvantagesHigh productivity due to high stock removal rate.Excellent service life when working on fillet welds.Precise and optimum grinding of the fillet weld geometry.ApplicationsChamferingDeburringWork on weld seamsWork on fillet weldsMaterials that can be workedStainless steel (INOX)SteelRecommendations for useAfter the abrasive on the outer edge of the disc has worn down, the disc can continue to be used as a conventional flap disc.For fillet weld radii > 3/16” or throat thickness ≤ 1/4” with 90° joint, width at the radius: 7/16” with diameter 6”.
Flap Disc, Z SGP STRONG STEEL
ShapePFC STRONG / B / T29AbrasiveZirconia, ZGrit36Drive typeAngle grinderMax. RPM13300Pack qty10Special Line SGPSpecial Line SGP includes products engineered for specific tasks that offer the user key advantages over conventional products. This quality line also includes products that, due to their particularly high performance, offer ultimate economic efficiency. Users who rely on top performance choose the POLIFAN-STRONG flap disc. It surpasses conventional flap discs and redefines the highest levels of efficiency. With its patented and unique design, it achieves an unsurpassed stock removal rate. It also has an astonishingly long service life over conventional flap discs. PFERD’s POLIFAN STRONG is patented in many countries across the globe. The innovative POLIFAN-STRONG flap disc is unique and has a particularly high performance level. Due to its patented design, it offers significantly higher economic efficiency compared to conventional flap discs.AdvantagesFast grinding due to constant grinding aggressiveness down to the last abrasive grit.Ultimate economic efficiency due to maximum stock removal and less wear on discs.The ultimate durability.ApplicationsChamferingDeburringWork on weld seamsMaterials that can be workedSteelRecommendations for useIdeal for work that requires a high stock removal rate like on weld seams.
Grinding disc, CC-GRIND® VIEW, 5" x 7/8, SGP STEELOX VICTOGRAIN®, Ceramic
ShapeCC-GRIND®-ROBUSTAbrasiveVICTOGRAINDrive typeAngle grinder, Cordless angle grinder, RobotMax. RPM12200Pack qty10CC-GRIND® VIEWSpecial Line SGP tools are specially developed for specific tasks and offer users key advantages over conventional products. In addition, the Special Line SGP includes tools that deliver maximum cost efficiency thanks to their exceptionally high performance in use. With the CC-GRIND®-ROBUST, PFERD TOOLS provides a modern, high-performance, and ergonomic alternative to grinding wheels, flap discs, and fiber discs. PFERD TOOLS’ CC-GRIND®-ROBUST is patented in many countries worldwide. Grinding disc with precision-molded, triangular high-performance abrasive VICTOGRAIN® for steel and stainless steel (INOX), offering maximum grinding performance and outstanding tool life. VICTOGRAIN products are among the most effective grinding tools in the world. The triangular, precision-formed abrasive grain from PFERD TOOLS delivers an exceptionally high level of abrasive performance. The VICTOGRAIN® abrasive grit triangles are uniform in shape and size, and their cutting edges engage the workpiece at the optimum angle, requiring very little energy to penetrate. This gives the user an efficient grinding process with fast material removal, long tool life, reduced heat input into the workpiece, and lower power demand on the tool drive. The VICTOGRAIN® abrasive grain triangles are bonded to the backing on one side, keeping them securely in place. Together with their slim design, this creates very large chip clearance, further improving grinding efficiency. The triangular VICTOGRAIN® structure has also been specifically engineered to maximize results. The tiny crystals inside the triangles ensure ideal wear characteristics, as sharp cutting edges are continually exposed while only minimal amounts of abrasive grain or triangle segments break off. By combining all these properties, users benefit from consistent, optimal performance in cool grinding, extremely long tool life, and uniform workpiece surface finish.AdvantagesThe viewing panes on the CC-GRIND® VIEW provide a clear view of the grinding process for maximum control during grinding.Users can ensure an optimal contact angle based on the sparking in the middle of the viewing pane.Significantly more ergonomic than a grinding wheel: Noise, vibrations and dust are significantly reduced.Glass-fiber-reinforced plastic backing pad guarantees a robust, reliable application.The ultimate in aggressive performance for the fastest work progress.In contrast to flap discs, they can achieve flat surfaces thanks to their dimensional stability.In contrast to fiber discs, CC-GRIND® VIEW does not deform, even under extreme climatic conditions, and is considerably more robust in heavy-duty use.ApplicationsChamferingDeburringStep-by-step fine grindingLevelingSurface grindingSurface workWork on weld seamsWorking on edgesWorking on edges (chamfering, rounding)Materials that can be workedStainless steel (INOX)SteelTool steelsWoodCase-hardened steelsRecommendations for useFor optimum results, use with a flat contact angle.Only use the face of the disc, not suitable for peripheral grinding (on edge).
Grinding disc, CC-GRIND®-FLEX
ShapeCC-GRIND®-FLEXAbrasiveCO-COOLGritFINEDrive typeAngle grinderMax. RPM13300Pack qty10CC-GRIND®-FLEXThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. The CC-GRIND®-FLEX is the semi-flexible addition to the CC-GRIND® family. It was specially developed for work on weld seams. Butt welds can be smoothed completely flat. This gets rid of any dents and bumps that are visible, particularly after painting or varnishing. Semi-flexible grinding disc for steel. High grinding performance and maximum service life.AdvantagesHighly aggressive abrasive produces fast results.Significantly more ergonomic than a conventional grinding wheel: noise and vibrations are reduced by 50%, dust by 80%.Layered structure of the fibreglass backing pad facilitates use that is just as durable and safe as with a grinding wheel.Complete smoothing of butt welds – without dents or bumps.Superior surface finish compared to conventional grinding wheels.ApplicationsStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedSteelRecommendations for useOnly use the face of the disc, not suitable for peripheral grinding (on edge).For optimal results, use with a flat contact angle and the SFS CC-GRIND® clamping flange set.
Grinding disc, CC-GRIND®-ROBUST, SG STEELOX
ShapeCC-GRIND®-ROBUSTAbrasiveCeramic CODrive typeAngle grinderMax. RPM13300Pack qty10CC-GRIND®-ROBUSTThe wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. With the CC-GRIND®-ROBUST, PFERD offers a modern, high-performance and ergonomic alternative to conventional grinding wheels, flap and fiber discs. Grinding disc for steel and stainless steel (INOX). High grinding performance and maximum tool life.AdvantagesHighly aggressive abrasive produces fast results.Fiberglass-reinforced plastic backing pad facilitates a robust, reliable application.Significantly more ergonomic than a conventional grinding wheel: Noise, vibrations and dust are significantly reduced. A considerably superior surface quality is also produced.In contrast to flap discs, they can achieve flat surfaces due to their dimensional stability.In contrast to conventional fibre discs, CC-GRIND®-ROBUST does not deform, even in extreme climates, and is considerably more robust in heavy-duty use.The use of a special clamping flange set is not necessary due to the design.Easily trimmable product.ApplicationsChamferingDeburringStep-by-step fine grindingSurface grindingWork on weld seamsMaterials that can be workedStainless steel (INOX)SteelRecommendations for useTrim the CC-GRIND®-ROBUST on sharp metal edges, files, or with cutting inserts.Trimming should only be done at a 45° contact angle of.Press the disc carefully on to the workpiece and increase the pressure until a chip is formed. Keep the pressure until the disc has been trimmed to the desired dimension.For optimum results, use with a flat contact angle.Only use the face of the disc, not suitable for peripheral grinding (on edge).Choose the CC-GRIND®-ROBUST SG STEELOX for deburring.
Grinding disc, CC-GRIND®-ROBUST, SG STEELOX, Ceramic
The wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. With the CC-GRIND®-ROBUST, PFERD offers a modern, high-performance and ergonomic alternative to conventional grinding wheels, flap and fiber discs. Grinding disc for steel and stainless steel (INOX). High grinding performance and maximum tool life.
Grinding disc, CC-GRIND®-ROBUST, SG STEELOX, Ceramic
The wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. With the CC-GRIND®-ROBUST, PFERD offers a modern, high-performance and ergonomic alternative to conventional grinding wheels, flap and fiber discs. Grinding disc for steel and stainless steel (INOX). High grinding performance and maximum tool life.