Abrasives
Mounted Crimped Wire Wheel Brush PSF
Technical informationBrush Diameter2 InchFilament MaterialSteel wire (ST)Wire Diameter0.012 InchShank Diameter1/4 InchTrim Length1/2 InchMax. RPM20000 RPMPack Qty5Designed for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.AdvantagesHighly flexible, enabling optimal adaptation to the workpiece contour.Packaged for retail.Long service life through use of PFERD special wire.ApplicationsCleaningDeburringDerustingRemoving oxide layersPaint strippingRougheningMaterials that can be workedSteel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsWoodCast ironCast steelThermosetting plasticsElastomersDrive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Mounted Flap Wheel
Mounted Flap WheelWith mounted flap wheels, coated abrasive flaps are arranged radially around the core in a fan-like structure. The flexible flaps perfectly adapt to surface contours. The abrasive grain is embedded in the sturdy, flexible cloth backing material with a resinoid bond. In ISO 3919, mounted flap wheels are designated as "flap wheels with shaft." For universal applications from coarse to fine grinding.Special featuresConforms to contours due to high flexibility.Consistently high stock removal rate throughout the entire service life as new, aggressive abrasive is constantly exposed.Can be used face-down very close to edges and in corners due to the flat, molded-core design.ApplicationsDeburringStep-by-step fine grindingLevelingStructuring (matt finishing, brush matting and satin finishing)Surface workWork on weld seamsMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumAnnealed cast ironBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Recommendations for useFlap wheel wear and the thermal load on the workpiece are reduced by decreasing the contact pressure and peripheral speed, and by adding grinding oil.Stock removal rate should be increased by using a coarser grit, not by increasing the contact pressure. This avoids unnecessary flap wheel wear and prevents the thermal load of the workpiece.Increasing the speed results in a slightly finer surface quality. An increase in contact pressure results in a slightly coarser surface. The softer the workpiece material, the coarser the resulting surface (when using the same grit size).For the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.SafetyFor safety reasons, the maximum permitted rotational speed indicated must never be exceeded.The contact pressure has to be reduced significantly when the optimum rotational speed is exceeded.Ensure the clamping depth is at least 5/8" and the specified maximum rotational speed is not exceeded with unsupported shank lengths.Technical informationDia. External1 1/2 inWidth1/2 inDia. shank1/4 InchDrive typeFlexible shaft driveGrit40Max. RPM23000Pack qty10
Mounted Flap Wheel, Aluminum oxide
With mounted flap wheels, coated abrasive flaps are arranged radially around the core in a fan-like structure. The flexible flaps perfectly adapt to surface contours. The abrasive grain is embedded in the sturdy, flexible cloth backing material with a resinoid bond. In ISO 3919, mounted flap wheels are designated as "flap wheels with shaft." For universal applications from coarse to fine grinding.
Mounted Flared Cup Brush
Technical informationBrush Diameter1 1/2 InchFilament MaterialStainless steel wire (INOX)Wire Diameter0.006 InchShank Diameter1/4 InchTrim Length5/16 InchMax. RPM20000 RPMPack Qty10Excellent for medium-duty brushing such as deburring, cleaning, and derusting. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.AdvantagesHighly flexible, enabling optimal adaptation to the workpiece contour.Ideal for cleaning narrow or hard-to-reach areas such as grooves, fillets, and inside edges.Very corrosion-resistant.Creates fine surfaces.ApplicationsCleaningDeburringDerustingRemoving heat discolourationRemoving oxide layersPaint strippingRougheningMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)TitaniumTitanium alloysAluminumBronzeCobalt-based alloysHard non-ferrous metalHigh-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Drive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Mounted Knot Wheel Brush
Technical informationBrush Diameter3 InchFilament MaterialStainless steel wire (INOX)Wire Diameter0.014 InchShank Diameter1/4 InchTrim Length3/4 InchNumber of Knots18Max. RPM25000 RPMPack Qty10Aggressive brush for cleaning, derusting and work on weld seams. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.AdvantagesOptimal access to hard-to-reach areas such as grooves and recesses.Aggressive brushing action due to tightly-twisted wire knots.Very corrosion-resistant.ApplicationsCleaningDeburringDerustingDescalingRemoving heat discolourationRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)TitaniumTitanium alloysAluminumBronzeCobalt-based alloysHard non-ferrous metalHigh-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Drive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Mounted Knot Wire Wheel Brush PSF
Technical informationBrush Diameter3 InchFilament MaterialSteel wire (ST)Wire Diameter0.012 InchShank Diameter1/4 InchTrim Length3/4 InchMax. RPM25000 RPMPack Qty5Aggressive brush for cleaning, derusting and work on weld seams. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. Steel wire is temperature-resistant up to 600°F.AdvantagesOptimal access to hard-to-reach areas such as grooves and recesses.Packaged for retail.Aggressive brushing action due to tightly-twisted wire knots.Long service life through use of PFERD special wire.ApplicationsCleaningDeburringDerustingDescalingRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSteel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast ironCast steelDrive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Mounted points - cylindrical type CAST EDGE
Mounted points - cylindrical type CAST EDGEThe cylindrical shape is ideal for grinding bores, radii and contours. The CAST EDGE type is designed to work with high cutting speeds for edge grinding and grinding out sharp burrs, sand inclusions, and scale in grey and nodular cast iron. Its main applications include removal of sharp burrs and grinding out sand contamination and metal contamination on cast material parts.Special featuresHighly dimensionally stable due to the high bond content.Cost-effective due to high edge stability, even on low-speed power tools.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedAnnealed cast ironGrey/nodular cast iron (GG/GJL, GGG/GJS)Recommendations for useCAST EDGE mounted points perform best at a peripheral speed of 6,000-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted points - cylindrical type STEEL
Mounted points - cylindrical type STEELThe STEEL type is the most universal bond for machining steel and cast steel. It is ideal for grinding high-speed steel (HSS) molded parts and weld dressing on steel constructions. The cylindrical shape is ideal for grinding bores, radii and contours.Special featuresGood grinding performance and stock removal rate in universal use on steel workpieces.High stock removal rate results in increased productivity.Designed for work on surfaces and edges.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedSteelCast steelRecommendations for useSTEEL mounted points perform best at a peripheral speed of 6,000-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to an unsupported shank length of 1/2".
Mounted points - cylindrical type STEEL EDGE
Mounted points - cylindrical type STEEL EDGEThe STEEL EDGE type is ideal for edge grinding and deburring work on steel and cast steel components. Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours. The cylindrical shape is ideal for grinding bores, radii and contours.Special featuresLong service life and low wear due to hard, dimensionally stable bond.Cost-effective due to high edge stability, even on low-speed power tools.Ideal for work on edges.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedSteelCast steelRecommendations for useSTEEL EDGE mounted points perform best at a peripheral speed of 5,000-7,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted points - cylindrical type TOUGH
Mounted points - cylindrical type TOUGHThe TOUGH type is specifically designed for use on titanium materials, nickel-based and cobalt-based alloys, hardened steel components and built-up weld deposits. Its applications include weld dressing on repair welds and reworking on turbine blades during aircraft maintenance and regrinding of repair welds in tool and die-making. The cylindrical shape is ideal for grinding bores, radii and contours.Special featuresCool grinding due to the easily broken-down grain mixture.High stock removal rate results in increased productivity.The self-sharpening properties of the ceramic oxide grain provide consistent stock removal rates throughout the life of the product.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedTitaniumTitanium alloysCobalt-based alloysHardened, heat-treated steels over 370 HV (38 HRC)High-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTOUGH mounted points perform best at a peripheral speed of 6,000-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted points - Series A CAST EDGE
Mounted points - Series A CAST EDGESeries A mounted points are generally used on larger components. Due to the special shapes of series A mounted points, it is possible to grind in a variety of contours. Applications include grinding out slits and grooves in hard-to-reach areas, machining bores and small holes, and smoothing surfaces. The CAST EDGE type is designed to work with high cutting speeds for edge grinding and grinding out sharp burrs, sand inclusions, and scale in grey and nodular cast iron. Its main applications include removal of sharp burrs and grinding out sand contamination and metal contamination on cast material parts.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedAnnealed cast ironGrey/nodular cast iron (GG/GJL, GGG/GJS)Recommendations for useCAST EDGE mounted points perform best at a peripheral speed of 6,000-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted points - Series A STEEL
Mounted points - Series A STEELThe STEEL type is the most universal bond for machining steel and cast steel. It is ideal for grinding high-speed steel (HSS) molded parts and weld dressing on steel constructions. Series A mounted points are generally used on larger components. Due to the special shapes of series A mounted points, it is possible to grind in a variety of contours. Applications include grinding out slits and grooves in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.Special featuresGood grinding performance and stock removal rate in universal use on steel workpieces.High stock removal rate results in increased productivity.Designed for work on surfaces and edges.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedSteelCast steelRecommendations for useSTEEL mounted points perform best at a peripheral speed of 6,000-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to an unsupported shank length of 1/2".
Mounted points - Series A STEEL EDGE
Mounted points - Series A STEEL EDGEThe STEEL EDGE type is ideal for edge grinding and deburring work on steel and cast steel components. Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours. Series A mounted points are generally used on larger components. Due to the special shapes, it is possible to grind in a variety of contours. Applications include grinding out slits and grooves in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.Special featuresLong service life and low wear due to hard, dimensionally stable bond.Cost-effective due to high edge stability, even on low-speed power tools.Ideal for work on edges.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedSteelCast steelRecommendations for useSTEEL EDGE mounted points perform best at a peripheral speed of 5,000-7,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted points - Series A TOUGH
Mounted points - Series A TOUGHThe TOUGH type is specifically designed for use on titanium materials, nickel-based and cobalt-based alloys, hardened steel components and built-up weld deposits. Its applications include weld dressing on repair welds and reworking on turbine blades during aircraft maintenance and regrinding of repair welds in tool and die-making. Series A mounted points are generally used on larger components. Due to the special shapes of series A mounted points, it is possible to grind in a variety of contours. Applications include grinding out slits and grooves in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.Special featuresCool grinding due to the easily broken-down grain mixture.High stock removal rate results in increased productivity.The self-sharpening properties of the ceramic oxide grain provide consistent stock removal rates throughout the life of the product.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedTitaniumTitanium alloysCobalt-based alloysHardened, heat-treated steels over 370 HV (38 HRC)High-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTOUGH mounted points perform best at a peripheral speed of 6,000-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted points - Series B STEEL EDGE
Mounted points - Series B STEEL EDGEThe STEEL EDGE type is ideal for edge grinding and deburring work on steel and cast steel components. Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours. Series B mounted points are generally used on smaller or more delicate components, such as in tool and die construction. Due to the special shapes, it is possible to grind in a variety of contours. Applications include grinding out slits and grooves in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.Special featuresLong service life and low wear due to hard, dimensionally stable bond.Cost-effective due to high edge stability, even on low-speed power tools.Ideal for work on edges.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedSteelCast steelRecommendations for useSTEEL EDGE mounted points perform best at a peripheral speed of 5,000-7,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted points - Series B TOUGH
Mounted points - Series B TOUGHThe TOUGH type is specifically designed for use on titanium materials, nickel-based and cobalt-based alloys, hardened steel components and built-up weld deposits. Its applications include weld dressing on repair welds and reworking on turbine blades during aircraft maintenance and regrinding of repair welds in tool and die-making. Series B mounted points are generally used on smaller or more delicate components, such as in tool and die construction. Due to the special shapes of series B mounted points, it is possible to grind in a variety of contours. Applications include grinding out slits and grooves in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.Special featuresCool grinding due to the easily broken-down grain mixture.High stock removal rate results in increased productivity.The self-sharpening properties of the ceramic oxide grain provide consistent stock removal rates throughout the life of the product.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedTitaniumTitanium alloysCobalt-based alloysHardened, heat-treated steels over 370 HV (38 HRC)High-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTOUGH mounted points perform best at a peripheral speed of 6,000-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted points set - STEEL EDGE
Mounted points set - STEEL EDGEThe STEEL EDGE type is ideal for edge grinding and deburring work on steel and cast steel components. Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours.Special featuresLong service life and low wear due to hard, dimensionally stable bond.Cost-effective due to high edge stability, even on low-speed power tools.Ideal for work on edges.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedSteelCast steelRecommendations for useSTEEL EDGE mounted points perform best at a peripheral speed of 5,000-7,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted Wheel Brush
Technical informationBrush Diameter3/4 InchFilament MaterialBristle, blackWire Diameter0 InchShank Diameter1/8 InchTrim Length3/16 InchMax. RPM25000 RPMPack Qty36Designed for light brushing such as deburring, cleaning and polishing. PFERD offers a wide range of miniature brushes for precision work. These can be used on flexible shaft drives, micro motors or electric grinders. Brushes with natural bristles (animal hair) are designed for light cleaning and dust removal, as well as for polishing (in combination with polishing pastes). These bristles are harder and less flexible than other natural bristle types. Natural bristles are temperature-resistant up to 300°F.AdvantagesMaximum precision and efficiency on delicate workpieces.Precise handling in hard-to-reach areas.ApplicationsCleaningPolishingMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)Steel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)TitaniumTitanium alloysZincAluminumBrassDrive TypesFlexible shaft driveStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Non-Woven Shop Roll
Non-Woven Shop RollDesigned for very fine grinding on small to large surfaces and contours, and for manually cleaning metal and painted surfaces. Achieve matte and satin-finished surfaces. Highly open structure.Special featuresConforms to contours due to high flexibility.Access hard-to-reach areas.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useCut to the necessary size if needed.Technical informationWidth4 inDrive typeManual applicationGrit80Pack qty1
Paper Backed Abrasive Sheet
Paper Backed Abrasive SheetThe aluminum oxide A abrasive is the low-cost alternative for normal workloads when working on painted wooden and metal surfaces. The paper-backed abrasive sheets comply with ISO 21948. Grit size 40 comes in packs of 50.Special featuresGood grain adhesion on sturdy paper.Good abrasive performance.High tear strength with optimum quality.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTear to the necessary size as needed.Technical informationWidth9 inDrive typeManual applicationGrit40Pack qty50
Pencil End Brush Crimped Wire Coated Cup End Brush
Technical informationBrush Diameter3/16 InchFilament MaterialStainless steel wire (INOX)Wire Diameter0.012 InchShank Diameter1/4 InchTrim Length3/8 InchMax. RPM8000 RPMPack Qty10For cleaning blind holes and small crevices. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.AdvantagesThe metal tube can be cut back before starting work in order to achieve a large spreading diameter or to access hard-to-reach areas.Cutting back the metal tube exposes the rest of the filament so that all of it can be used.Optimal access to hard-to-reach areas.Very corrosion-resistant.Creates fine surfaces.ApplicationsCleaningDeburringDerustingRemoving heat discolourationRemoving oxide layersPaint strippingRougheningMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)TitaniumTitanium alloysAluminumBronzeCobalt-based alloysHard non-ferrous metalHigh-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Drive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
PFERD 12" Extension for Hole Saw Arbors
PFERD offers a variety of hole saw shanks designed for different hole saw dimensions. PFERD also offers arbor extensions for working on hard-to-reach areas. The bi-metal hole saw arbors EDP 29033 and EDP 29034 can be extended using this arbor extension.Special featuresDesigned for hard-to-reach areas.Ideal for work on hollow walls.Deep holes can be easily sawed.Achieves the required distance between the power tool and the work area.Reduces damage to the workpiece and power tool.Keeps dust out of the power tool during use.
PFERD 2" ALUMASTER Arbor - 3/8" Shank
PFERD offers matching arbors for ALUMASTER high speed discs. For use on flexible shaft drives and straight grinders.
PFERD ALUMASTER High Speed Disc 2"
The innovative ALUMASTER High Speed Disc is a unique product with an extremely high stock removal rate. It is ideal for processing aluminum as it does not generate hazardous or explosive dust. It consists of specially developed tungsten carbide cutting inserts, which are fixed to the High Speed Disc. Special disc for processing aluminum alloys. With its uniquely designed arbor, it can be used both on angle grinders (mounting dia. 3/8") and on straight grinders and flexible shaft drives. It is ideal for working on hard-to-reach areas and delicate components. Guards are not necessary due to the disc diameter of 2". High Speed Disc ALUMASTER HSD-R 2" including pre-mounted tungsten carbide cutting inserts, hexalobular socket key, and plastic box.Special featuresDoes not generate hazardous or explosive aluminum dust.Does not require a dust extraction system.Cost-effective and eco-friendly alternative to grinding wheels and flap discs of comparable weight.Innovative and powerful milling tool designed for maximum safety, extreme durability, and ease of use.Specially developed, turnable, and replaceable tungsten carbide cutting inserts.Exceptionally high stock removal rate.Recommendations for useThe ALUMASTER has been designed primarily for use on aluminum, wrought aluminum alloys, and cast aluminum. It can also machine non-ferrous metals that have a relatively low strength, and it can machine fiber-reinforced plastics. Check this for the specific application on a case-by-case basis.Do not push the disc deep into a workpiece. The milling disc is not a cutting tool.Do not exert unnecessarily high forces on the angle grinder. The ALUMASTER High Speed Disc already works with low forces.When machining workpiece edges, cut along the edge, never across the edge.Do not decelerate the disc while it is touching the workpiece. The cutting inserts may break.Safety notesThe flange nut must be tightened with the appropriate tool, such as a face pin wrench. Clamping systems which are designed to be tightened without the use of an additional tool, i.e. which are tightened by hand, should not be used.Tighten the mounting bolts of the cutting inserts using a torque spanner with a tightening torque of 4 Nm. The part number for the 4 Nm torque spanner is 20135.Loose cutting inserts may break during use. Regularly check to make sure they are attached securely.Workpiece materialsAluminumBrassCopperSoft aluminium alloysTough aluminium alloysZincApplicationsMillingMilling outRoot seam processingSurface workWork on weld seamsWork on fillet weldsCompatible power toolsAngle grinderCordless angle grinderRobotStationary machines