Products
COMBITWIST® Knot Wire Cup Brush
Technical informationBrush Diameter2 3/4 InchFilament MaterialSteel wire (ST)Wire Diameter0.014 InchThread / Arbor5/8-11Trim Length7/8 InchNumber of Knots18Max. RPM14000 RPMPack Qty5The brush knots are knotted to 75% of the length. The brush is designed for brushing large areas and for heavy-duty brushwork, such as deburring, cleaning, derusting and descaling, as well as removing spatter. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. Steel wire is temperature-resistant up to 600°F.AdvantagesMaximum economic efficiency due to maximum service life and stock removal rate.Brush runs smoothly due to it's flawless balance.Designed for work on corners and edges as the knots are less likely to unravel.Optimal ratio of aggressiveness and flexibility.Long service life through use of PFERD special wire.ApplicationsCleaningDeburringDerustingDescalingRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSteel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)Cast ironCast steelDrive TypesAngle grinder
COMBITWIST® Knot Wire Cup Brush
Technical informationBrush Diameter4 InchFilament MaterialStainless steel wire (INOX)Wire Diameter0.02 InchThread / Arbor5/8-11Trim Length1 3/8 InchNumber of Knots48Max. RPM7000 RPMPack Qty1The brush knots are knotted to 75% of the length. The two-row brush is designed for brushing large areas and for heavy-duty brushwork, such as deburring, cleaning, derusting and descaling, as well as removing spatter. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.AdvantagesDouble-row design enables fast results due to larger filament width.Maximum economic efficiency due to maximum service life and stock removal rate.Brush runs smoothly due to it's flawless balance.Designed for work on corners and edges as the knots are less likely to unravel.Optimal ratio of aggressiveness and flexibility.Very corrosion-resistant.ApplicationsCleaningDeburringDerustingDescalingRemoving heat discolourationRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)TitaniumTitanium alloysAluminumBronzeCobalt-based alloysHard non-ferrous metalHigh-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Drive TypesAngle grinder
COMBITWIST® Knot Wire Wheel Brush
Technical informationBrush Diameter4 InchFilament MaterialStainless steel wire (INOX)Wire Diameter0.014 InchThread / Arbor5/8-11Trim Length3/4 InchNumber of Knots22Max. RPM20000 RPMPack Qty10Very aggressive brush. Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.AdvantagesMaximum economic efficiency due to maximum service life and stock removal rate.Brush runs smoothly due to it's flawless balance.Designed for work on corners and edges as the knots are less likely to unravel.Aggressive brushing action due to tightly-twisted wire knots.Very corrosion-resistant.ApplicationsCleaningDeburringDerustingDescalingRemoving heat discolourationRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)TitaniumTitanium alloysAluminumBronzeCobalt-based alloysHard non-ferrous metalHigh-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Drive TypesAngle grinder
COMBITWIST® Knot
Technical informationBrush Diameter4 InchFilament MaterialStainless steel wire (INOX)Wire Diameter0.014 InchThread / Arbor5/8-11Trim Length7/8 InchNumber of Knots22Max. RPM20000 RPMPack Qty10The brush knots are knotted to 75% of the length. The brush is designed for brushing large areas and for heavy-duty brushwork, such as deburring, cleaning, derusting and descaling, as well as removing spatter. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.AdvantagesOptimal ratio of aggressiveness and flexibility.Maximum economic efficiency due to maximum service life and stock removal rate.Brush runs smoothly due to it's flawless balance.Designed for work on corners and edges as the knots are less likely to unravel.Very corrosion-resistant.ApplicationsCleaningDeburringDerustingDescalingRemoving heat discolourationRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)TitaniumTitanium alloysAluminumBronzeCobalt-based alloysHard non-ferrous metalHigh-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Drive TypesAngle grinder
COMBITWIST® Stringer Bead Wheel Brush
Technical informationBrush Diameter4 InchFilament MaterialStainless steel wire (INOX)Wire Diameter0.02 InchThread / Arbor5/8-11Trim Length3/4 InchNumber of Knots32Max. RPM20000 RPMPack Qty10Very aggressive and robust brush that is able to withstand high mechanical loads. Perfect for heavy-duty brushing in pipeline and container construction. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.AdvantagesExtra-slim design allows access to hard-to-reach areas such as root weld seams.Maximum economic efficiency due to maximum service life and stock removal rate.Brush runs smoothly due to it's flawless balance.Designed for work on corners and edges as the knots are less likely to unravel.Aggressive brushing action due to tightly-twisted wire knots.Very corrosion-resistant.ApplicationsCleaningDeburringDerustingDescalingRemoving heat discolourationRemoving oxide layersPaint strippingRoot seam processingWork on weld seamsWork on fillet weldsMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)TitaniumTitanium alloysAluminumBronzeCobalt-based alloysHard non-ferrous metalHigh-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Drive TypesAngle grinder
Condenser Pipe Brush Double Spiral
Technical informationBrush Diameter1/2 InchFilament MaterialSteel wire (ST)Wire Diameter0.01 InchPack Qty1Double stem, double spiral brushes with internal threaded end for handle attachment. Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.AdvantagesLoop end for easy use.Long service life through use of PFERD special wire.ApplicationsCleaningDrive TypesManual application
Contact file hand
Technical informationPFERD Tungsten Point File 4" Second CutItem number11509150Cut2Cut files typeSecondEDP no.17008Height3/64 InchLength4 InchPFERD TOOLS type1118 AWidth5/16 InchPackaging unit10 EACHTungsten point files are used to prepare or clean electrical contacts for use, and are ideal for narrow grooves and cut-outs. Rectangular file with flat handle and cut 2 on two sides. Very thin file, specifically designed for work on contacts, narrow grooves, and cut holes. Second cut for universal filing work. These contact files are delivered in industrial packaging. The punch file handle eliminates the need for an additional handle.Special featuresThe punch file handle eliminates the need for an additional handle.Very small cross section for use in keyways.Practical design.Workpiece materialsSteels up to 370 HV (< 38 HRC)Cast steelOther non-ferrous metalsApplicationsDeburringSurface workCompatible power toolsManual application
CORINOX files half-round
Technical informationPFERD CORINOX® Machinists File 8" Half Round Cut 2Item number19607204Cut2EDP no.15117Height7/32 InchLength8 InchPFERD TOOLS typeCOR 835Width3/4 InchShapeTang files, half-roundPackaging unit12 EACHCORINOX files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to precisely file very small and delicate components. Swiss cut 2 for medium-fine precision work.Special featuresExtremely wear-resistant and sturdy due to high surface hardness.Can be used on materials that are difficult to file.Does not clog.Chips can easily be removed by knocking the tool gently against a hard object.Workpiece materialsStainless steel (INOX)Fibre-reinforced thermosetting plastics (GRP, CRP)Hard non-ferrous metalHigh-temperature-resistant materialsApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
CORINOX files hand
Technical informationPFERD CORINOX® Machinists File 10" Hand Cut 0Item number19600252Cut0EDP no.15134Height1/4 InchLength10 InchPFERD TOOLS typeCOR 800Width31/32 InchShapePottance files, handPackaging unit12 EACHCORINOX files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to precisely file very small and delicate components. Swiss cut 0 for coarse precision work.Special featuresExtremely wear-resistant and sturdy due to high surface hardness.Can be used on materials that are difficult to file.Does not clog.Chips can easily be removed by knocking the tool gently against a hard object.Workpiece materialsStainless steel (INOX)Fibre-reinforced thermosetting plastics (GRP, CRP)Hard non-ferrous metalHigh-temperature-resistant materialsApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
CORINOX files round
Technical informationPFERD CORINOX® Machinists File 8" Round Cut 2Item number19609204Cut2EDP no.15123Length8 InchPFERD TOOLS typeCOR 845Dia. external5/16 InchShapeRoundPackaging unit12 EACHCORINOX files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to precisely file very small and delicate components. Swiss cut 2 for medium-fine precision work.Special featuresExtremely wear-resistant and sturdy due to high surface hardness.Can be used on materials that are difficult to file.Does not clog.Chips can easily be removed by knocking the tool gently against a hard object.Workpiece materialsStainless steel (INOX)Fibre-reinforced thermosetting plastics (GRP, CRP)Hard non-ferrous metalHigh-temperature-resistant materialsApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
CORINOX files square
Technical informationPFERD CORINOX® Machinists File 6" Square Cut 2Item number19612154Cut2EDP no.15132Length6 InchPFERD TOOLS typeCOR 860Width7/32 InchShapeSquarePackaging unit12 EACHCORINOX files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to precisely file very small and delicate components. Swiss cut 2 for medium-fine precision work.Special featuresExtremely wear-resistant and sturdy due to high surface hardness.Can be used on materials that are difficult to file.Does not clog.Chips can easily be removed by knocking the tool gently against a hard object.Workpiece materialsStainless steel (INOX)Fibre-reinforced thermosetting plastics (GRP, CRP)Hard non-ferrous metalHigh-temperature-resistant materialsApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
CORINOX files three square
Technical informationPFERD CORINOX® Machinists File 8" Three Square Cut 2Item number19611204Cut2EDP no.15129Length8 InchPFERD TOOLS typeCOR 855Width5/8 InchShapeThree squarePackaging unit12 EACHCORINOX files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to precisely file very small and delicate components. Swiss cut 2 for medium-fine precision work.Special featuresExtremely wear-resistant and sturdy due to high surface hardness.Can be used on materials that are difficult to file.Does not clog.Chips can easily be removed by knocking the tool gently against a hard object.Workpiece materialsStainless steel (INOX)Fibre-reinforced thermosetting plastics (GRP, CRP)Hard non-ferrous metalHigh-temperature-resistant materialsApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
CORINOX needle files flat
Technical informationPFERD CORINOX® Needle File 7" Flat Cut 2Item number12471184Cut2EDP no.15203Height1/16 InchLength7 InchPFERD TOOLS typeCOR 2306Width7/32 InchShapeFlatPackaging unit12 EACHCORINOX needle files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to precisely file very small and delicate components. Swiss cut 2 for medium-fine precision work.Special featuresExtremely wear-resistant and sturdy due to high surface hardness.Can be used on materials that are difficult to file.Does not clog.Chips can easily be removed by knocking the tool gently against a hard object.Can be used with or without an additional file handle due to the tang shape.Workpiece materialsStainless steel (INOX)Fibre-reinforced thermosetting plastics (GRP, CRP)Hard non-ferrous metalHigh-temperature-resistant materialsApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual filing toolManual application
CORINOX needle files half-round
Technical informationPFERD CORINOX® Needle File 7" Half Round Cut 0Item number12478182Cut0EDP no.15251Height3/32 InchLength7 InchPFERD TOOLS typeCOR 2302Width7/32 InchShapeHalf-roundPackaging unit12 EACHCORINOX needle files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to precisely file very small and delicate components. Swiss cut 0 for coarse precision work.Special featuresExtremely wear-resistant and sturdy due to high surface hardness.Can be used on materials that are difficult to file.Does not clog.Chips can easily be removed by knocking the tool gently against a hard object.Can be used with or without an additional file handle due to the tang shape.Workpiece materialsStainless steel (INOX)Fibre-reinforced thermosetting plastics (GRP, CRP)Hard non-ferrous metalHigh-temperature-resistant materialsApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual filing toolManual application
CORINOX needle files hand
Technical informationPFERD CORINOX® Needle File 7" Hand Cut 2Item number12472184Cut2EDP no.15213Height1/16 InchLength7 InchPFERD TOOLS typeCOR 2301Width7/32 InchShapeHandPackaging unit12 EACHCORINOX needle files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to precisely file very small and delicate components. Swiss cut 2 for medium-fine precision work.Special featuresExtremely wear-resistant and sturdy due to high surface hardness.Can be used on materials that are difficult to file.Does not clog.Chips can easily be removed by knocking the tool gently against a hard object.Can be used with or without an additional file handle due to the tang shape.Workpiece materialsStainless steel (INOX)Fibre-reinforced thermosetting plastics (GRP, CRP)Hard non-ferrous metalHigh-temperature-resistant materialsApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual filing toolManual application
CORINOX needle files round
Technical informationPFERD CORINOX® Needle File 7" Round Cut 0Item number12476182Cut0EDP no.15241Length7 InchPFERD TOOLS typeCOR 2310Dia. external9/64 InchShapeRoundPackaging unit12 EACHCORINOX needle files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to precisely file very small and delicate components. Swiss cut 0 for coarse precision work.Special featuresExtremely wear-resistant and sturdy due to high surface hardness.Can be used on materials that are difficult to file.Does not clog.Chips can easily be removed by knocking the tool gently against a hard object.Can be used with or without an additional file handle due to the tang shape.Workpiece materialsStainless steel (INOX)Fibre-reinforced thermosetting plastics (GRP, CRP)Hard non-ferrous metalHigh-temperature-resistant materialsApplicationsChamferingDeburringFinishingRoundingWorking on edges (chamfering, rounding)Compatible power toolsManual filing toolManual application
CORINOX needle files square
Technical informationPFERD CORINOX® Needle File 7" Square Cut 0Item number12475182Cut0EDP no.15231Length7 InchPFERD TOOLS typeCOR 2308Dia. external7/64 InchShapeSquarePackaging unit12 EACHCORINOX needle files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to precisely file very small and delicate components. Swiss cut 0 for coarse precision work.Special featuresExtremely wear-resistant and sturdy due to high surface hardness.Can be used on materials that are difficult to file.Does not clog.Chips can easily be removed by knocking the tool gently against a hard object.Can be used with or without an additional file handle due to the tang shape.Workpiece materialsStainless steel (INOX)Fibre-reinforced thermosetting plastics (GRP, CRP)Hard non-ferrous metalHigh-temperature-resistant materialsApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual filing toolManual application
CORINOX needle files three square
Technical informationPFERD CORINOX® Needle File 7" Three Square Cut 0Item number12474182Cut0EDP no.15221Length7 InchPFERD TOOLS typeCOR 2307Dia. external5/32 InchShapeThree squarePackaging unit12 EACHCORINOX needle files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to precisely file very small and delicate components. Swiss cut 0 for coarse precision work.Special featuresExtremely wear-resistant and sturdy due to high surface hardness.Can be used on materials that are difficult to file.Does not clog.Chips can easily be removed by knocking the tool gently against a hard object.Can be used with or without an additional file handle due to the tang shape.Workpiece materialsStainless steel (INOX)Fibre-reinforced thermosetting plastics (GRP, CRP)Hard non-ferrous metalHigh-temperature-resistant materialsApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual filing toolManual application
CORINOX® Machinists File 8" Half Round Cut
CORINOX files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to precisely file very small and delicate components. Swiss cut 0 for coarse precision work.
CORINOX® Machinists File 8" Hand Cut
CORINOX files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to precisely file very small and delicate components. Swiss cut 0 for coarse precision work.
Crimped Mounted Cup Brush
Technical informationBrush Diameter1 3/4 InchFilament MaterialStainless steel wire (INOX)Wire Diameter0.012 InchShank Diameter1/4 InchTrim Length11/16 InchMax. RPM13000 RPMPack Qty10Designed for cleaning, derusting and smoothing. Perfect tool for the removal of corrosion and paint. Ideal for brushing on large, flat and easily accessible surfaces with the entire brush face applied to the workpiece. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.AdvantagesHighly flexible, enabling optimal adaptation to the workpiece contour.Very corrosion-resistant.Creates fine surfaces.ApplicationsCleaningDeburringDerustingRemoving heat discolourationRemoving oxide layersPaint strippingRougheningMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)TitaniumTitanium alloysAluminumBronzeCobalt-based alloysHard non-ferrous metalHigh-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Drive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Crimped Mounted Wheel Brush
Technical informationBrush Diameter2 InchFilament MaterialBrass wire (MES)Wire Diameter0.008 InchShank Diameter1/4 InchTrim Length1/2 InchMax. RPM15000 RPMPack Qty10Designed for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Brass wire filament brushes are designed for applications like surface finishing on copper or brass workpieces. Compared to steel wire, brass wire is softer and more flexible. For all brushes with brass wire, PFERD uses wire quality CuZn37. Brass wire is temperature-resistant up to 350°F.AdvantagesHighly flexible, enabling optimal adaptation to the workpiece contour.Low-sparking.Creates fine surfaces.ApplicationsCleaningDeburringRemoving oxide layersMaterials that can be workedZincBrassCopperOther non-ferrous metalsDrive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Crimped Wire Bevel Brush
Technical informationBrush Diameter4 InchFilament MaterialStainless steel wire (INOX)Wire Diameter0.014 InchThread / Arbor5/8-11Trim Length3/4 InchMax. RPM12500 RPMPack Qty5Excellent for medium-duty brushing such as deburring, cleaning, and derusting. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.AdvantagesDesigned for use on angle grinders up to 15,800 SFPM.Highly flexible, enabling optimal adaptation to the workpiece contour.Ideal for cleaning narrow or hard-to-reach areas such as grooves, fillets, and inside edges.Very corrosion-resistant.Creates fine surfaces.ApplicationsCleaningDeburringDerustingRemoving heat discolourationRemoving oxide layersPaint strippingRougheningMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)TitaniumTitanium alloysAluminumBronzeCobalt-based alloysHard non-ferrous metalHigh-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Drive TypesAngle grinderCordless angle grinder
Crimped Wire Coated Cup End Brush
Technical informationBrush Diameter1/2 InchFilament MaterialStainless steel wire (INOX)Wire Diameter0.006 InchShank Diameter1/4 InchTrim Length1 InchMax. RPM25000 RPMPack Qty10Designed for light brushing such as deburring, cleaning and derusting. End brush with plastic-covered brush body. In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316.;The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion. Stainless steel wire (INOX) is temperature-resistant up to 850 °F.AdvantagesThe brush is degreased and does not leave any oil residue on the workpiece.Optimal access to hard-to-reach areas, such as drilled holes and crevices, as the filament spreads out upon rotation.The plastic covering prevents the risk of corrosion.Very corrosion-resistant.Creates fine surfaces.ApplicationsCleaningDeburringDerustingRemoving heat discolourationRemoving oxide layersPaint strippingRougheningMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)TitaniumTitanium alloysAluminumBronzeCobalt-based alloysHard non-ferrous metalHigh-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Drive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.