Shop
Mounted points - Series A CAST EDGE
Mounted points - Series A CAST EDGESeries A mounted points are generally used on larger components. Due to the special shapes of series A mounted points, it is possible to grind in a variety of contours. Applications include grinding out slits and grooves in hard-to-reach areas, machining bores and small holes, and smoothing surfaces. The CAST EDGE type is designed to work with high cutting speeds for edge grinding and grinding out sharp burrs, sand inclusions, and scale in grey and nodular cast iron. Its main applications include removal of sharp burrs and grinding out sand contamination and metal contamination on cast material parts.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedAnnealed cast ironGrey/nodular cast iron (GG/GJL, GGG/GJS)Recommendations for useCAST EDGE mounted points perform best at a peripheral speed of 6,000-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted points - Series A STEEL
Mounted points - Series A STEELThe STEEL type is the most universal bond for machining steel and cast steel. It is ideal for grinding high-speed steel (HSS) molded parts and weld dressing on steel constructions. Series A mounted points are generally used on larger components. Due to the special shapes of series A mounted points, it is possible to grind in a variety of contours. Applications include grinding out slits and grooves in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.Special featuresGood grinding performance and stock removal rate in universal use on steel workpieces.High stock removal rate results in increased productivity.Designed for work on surfaces and edges.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedSteelCast steelRecommendations for useSTEEL mounted points perform best at a peripheral speed of 6,000-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to an unsupported shank length of 1/2".
Mounted points - Series A STEEL EDGE
Mounted points - Series A STEEL EDGEThe STEEL EDGE type is ideal for edge grinding and deburring work on steel and cast steel components. Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours. Series A mounted points are generally used on larger components. Due to the special shapes, it is possible to grind in a variety of contours. Applications include grinding out slits and grooves in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.Special featuresLong service life and low wear due to hard, dimensionally stable bond.Cost-effective due to high edge stability, even on low-speed power tools.Ideal for work on edges.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedSteelCast steelRecommendations for useSTEEL EDGE mounted points perform best at a peripheral speed of 5,000-7,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted points - Series A TOUGH
Mounted points - Series A TOUGHThe TOUGH type is specifically designed for use on titanium materials, nickel-based and cobalt-based alloys, hardened steel components and built-up weld deposits. Its applications include weld dressing on repair welds and reworking on turbine blades during aircraft maintenance and regrinding of repair welds in tool and die-making. Series A mounted points are generally used on larger components. Due to the special shapes of series A mounted points, it is possible to grind in a variety of contours. Applications include grinding out slits and grooves in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.Special featuresCool grinding due to the easily broken-down grain mixture.High stock removal rate results in increased productivity.The self-sharpening properties of the ceramic oxide grain provide consistent stock removal rates throughout the life of the product.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedTitaniumTitanium alloysCobalt-based alloysHardened, heat-treated steels over 370 HV (38 HRC)High-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTOUGH mounted points perform best at a peripheral speed of 6,000-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted points - Series B STEEL EDGE
Mounted points - Series B STEEL EDGEThe STEEL EDGE type is ideal for edge grinding and deburring work on steel and cast steel components. Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours. Series B mounted points are generally used on smaller or more delicate components, such as in tool and die construction. Due to the special shapes, it is possible to grind in a variety of contours. Applications include grinding out slits and grooves in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.Special featuresLong service life and low wear due to hard, dimensionally stable bond.Cost-effective due to high edge stability, even on low-speed power tools.Ideal for work on edges.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedSteelCast steelRecommendations for useSTEEL EDGE mounted points perform best at a peripheral speed of 5,000-7,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted points - Series B TOUGH
Mounted points - Series B TOUGHThe TOUGH type is specifically designed for use on titanium materials, nickel-based and cobalt-based alloys, hardened steel components and built-up weld deposits. Its applications include weld dressing on repair welds and reworking on turbine blades during aircraft maintenance and regrinding of repair welds in tool and die-making. Series B mounted points are generally used on smaller or more delicate components, such as in tool and die construction. Due to the special shapes of series B mounted points, it is possible to grind in a variety of contours. Applications include grinding out slits and grooves in hard-to-reach areas, machining bores and small holes, and smoothing surfaces.Special featuresCool grinding due to the easily broken-down grain mixture.High stock removal rate results in increased productivity.The self-sharpening properties of the ceramic oxide grain provide consistent stock removal rates throughout the life of the product.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedTitaniumTitanium alloysCobalt-based alloysHardened, heat-treated steels over 370 HV (38 HRC)High-temperature-resistant materialsNickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTOUGH mounted points perform best at a peripheral speed of 6,000-9,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted points set - STEEL EDGE
Mounted points set - STEEL EDGEThe STEEL EDGE type is ideal for edge grinding and deburring work on steel and cast steel components. Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours.Special featuresLong service life and low wear due to hard, dimensionally stable bond.Cost-effective due to high edge stability, even on low-speed power tools.Ideal for work on edges.ApplicationsDeburringFinishingGrinding outGroutingLevelingSurface workWork on weld seamsWorking on edges (chamfering, rounding)Materials that can be workedSteelCast steelRecommendations for useSTEEL EDGE mounted points perform best at a peripheral speed of 5,000-7,800 SFPM.SafetyThe maximum permitted rotational speed relates to the unsupported shank length of 1/2".
Mounted Wheel Brush
Technical informationBrush Diameter3/4 InchFilament MaterialBristle, blackWire Diameter0 InchShank Diameter1/8 InchTrim Length3/16 InchMax. RPM25000 RPMPack Qty36Designed for light brushing such as deburring, cleaning and polishing. PFERD offers a wide range of miniature brushes for precision work. These can be used on flexible shaft drives, micro motors or electric grinders. Brushes with natural bristles (animal hair) are designed for light cleaning and dust removal, as well as for polishing (in combination with polishing pastes). These bristles are harder and less flexible than other natural bristle types. Natural bristles are temperature-resistant up to 300°F.AdvantagesMaximum precision and efficiency on delicate workpieces.Precise handling in hard-to-reach areas.ApplicationsCleaningPolishingMaterials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Stainless steel (INOX)Steel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)TitaniumTitanium alloysZincAluminumBrassDrive TypesFlexible shaft driveStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Needle file handle set
Technical informationPFERD Needle File Set 6-1/4" Cut 0 12 PiecesItem number12704082Cut1EDP no.12039Length6.25 InchPFERD TOOLS type266/16 PPackaging unit1 EACHIdeal for working on very small surfaces, corners, cut-outs, intricate areas, and holes. The following shapes: flat with round edges and crossing oval round-oval, are only available in a set and not individually.Special featuresCan be used with or without an additional needle file handle due to the tang shape.Ordering notesComes in a PVC plastic pouch.Workpiece materialsSteels up to 370 HV (< 38 HRC)ApplicationsDeburringFinishingCompatible power toolsManual filing toolManual application
Needle File Set 6-1/4" 12 Pieces
Ideal for working on very small surfaces, corners, cut-outs, intricate areas, and holes. The following shapes: flat with round edges and crossing oval round-oval, are only available in a set and not individually.
Needle file square
Technical informationPFERD Square Needle File 5-1/2" Cut 0Item number12511061Cut0EDP no.12005Length5.5 InchPFERD TOOLS type2408Width3/32 InchShapeSquarePackaging unit12 EACHIdeal for working on very small surfaces, corners, cut-outs, intricate areas, and holes. Swiss cut 0 for coarse precision work.Special featuresCan be used with or without an additional needle file handle due to the tang shape.Workpiece materialsSteels up to 370 HV (< 38 HRC)ApplicationsDeburringFinishingCompatible power toolsManual filing toolManual application
Needle files crossing oval
Technical informationPFERD Crossing Needle File 6-1/4" Cut 2Item number12504083Cut2EDP no.12066Height5/64 InchLength6.25 InchPFERD TOOLS type2403Width13/64 InchShapeCrossing oval shapePackaging unit12 EACHIdeal for working on very small surfaces, corners, cut-outs, intricate areas, and holes. Swiss cut 2 for medium-fine precision work.Special featuresCan be used with or without an additional needle file handle due to the tang shape.Workpiece materialsSteels up to 370 HV (< 38 HRC)ApplicationsDeburringFinishingCompatible power toolsManual filing toolManual application
Needle files flat
Technical informationPFERD Crochet Needle File 6-1/4" Cut 0Item number12505081Cut0EDP no.12012Height3/64 InchLength6.25 InchPFERD TOOLS type2406Width7/32 InchShapeFlatPackaging unit12 EACHIdeal for working on very small surfaces, corners, cut-outs, intricate areas, and holes. Swiss cut 0 for coarse precision work.Special featuresCan be used with or without an additional needle file handle due to the tang shape.Workpiece materialsSteels up to 370 HV (< 38 HRC)ApplicationsDeburringFinishingCompatible power toolsManual filing toolManual application
Needle files half-round
Technical informationPFERD Half Round Needle File 6-1/4" Cut 2Item number12509083Cut2EDP no.12057Height5/64 InchLength6.25 InchPFERD TOOLS type2402Width7/32 InchShapeHalf-roundPackaging unit12 EACHIdeal for working on very small surfaces, corners, cut-outs, intricate areas, and holes. Swiss cut 2 for medium-fine precision work.Special featuresCan be used with or without an additional needle file handle due to the tang shape.Workpiece materialsSteels up to 370 HV (< 38 HRC)ApplicationsDeburringFinishingCompatible power toolsManual filing toolManual application
Needle files hand
Technical informationPFERD Equalling Needle File 6-1/4" Cut 0Item number12501081Cut0EDP no.12030Height3/64 InchLength6.25 InchPFERD TOOLS type2401Width7/32 InchShapeHandPackaging unit12 EACHIdeal for working on very small surfaces, corners, cut-outs, intricate areas, and holes. Swiss cut 0 for coarse precision work.Special featuresCan be used with or without an additional needle file handle due to the tang shape.Workpiece materialsSteels up to 370 HV (< 38 HRC)ApplicationsDeburringFinishingCompatible power toolsManual filing toolManual application
Needle files knife
Technical informationPFERD Knife Needle File 6-1/4" Cut 2Item number12506083Cut2EDP no.12054Height5/64 InchLength6.25 InchPFERD TOOLS type2405Width15/64 InchShapeKnife shapePackaging unit12 EACHIdeal for working on very small surfaces, corners, cut-outs, intricate areas, and holes. Swiss cut 2 for medium-fine precision work.Special featuresCan be used with or without an additional needle file handle due to the tang shape.Workpiece materialsSteels up to 370 HV (< 38 HRC)ApplicationsDeburringFinishingCompatible power toolsManual filing toolManual application
Needle files round
Technical informationPFERD Round Needle File 6-1/4" Cut 0Item number12512081Cut0EDP no.12003Length5.5 InchPFERD TOOLS type2410Width1/8 InchShapeRoundPackaging unit12 EACHIdeal for working on very small surfaces, corners, cut-outs, intricate areas, and holes. Swiss cut 0 for coarse precision work.Special featuresCan be used with or without an additional needle file handle due to the tang shape.Workpiece materialsSteels up to 370 HV (< 38 HRC)ApplicationsDeburringFinishingCompatible power toolsManual filing toolManual application
Needle files three square
Technical informationPFERD Three Square Needle File 6-1/4" Cut 2Item number12508083Cut2EDP no.12048Length6.25 InchPFERD TOOLS type2407Width9/64 InchShapeThree squarePackaging unit12 EACHIdeal for working on very small surfaces, corners, cut-outs, intricate areas, and holes. Swiss cut 2 for medium-fine precision work.Special featuresCan be used with or without an additional needle file handle due to the tang shape.Workpiece materialsSteels up to 370 HV (< 38 HRC)ApplicationsDeburringFinishingCompatible power toolsManual filing toolManual application
Needle Rasp Set - 6 Piece 5-1/2" Cut
Swiss cut 2 for medium-fine precision work. Contains an application-oriented selection of needle rasps for work in hard-to-reach areas.
Non-Woven Shop Roll
Non-Woven Shop RollDesigned for very fine grinding on small to large surfaces and contours, and for manually cleaning metal and painted surfaces. Achieve matte and satin-finished surfaces. Highly open structure.Special featuresConforms to contours due to high flexibility.Access hard-to-reach areas.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useCut to the necessary size if needed.Technical informationWidth4 inDrive typeManual applicationGrit80Pack qty1
Paper Backed Abrasive Sheet
Paper Backed Abrasive SheetThe aluminum oxide A abrasive is the low-cost alternative for normal workloads when working on painted wooden and metal surfaces. The paper-backed abrasive sheets comply with ISO 21948. Grit size 40 comes in packs of 50.Special featuresGood grain adhesion on sturdy paper.Good abrasive performance.High tear strength with optimum quality.ApplicationsCleaningStep-by-step fine grindingRougheningSurface workMaterials that can be workedStainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsTitaniumTitanium alloysZincAluminumAnnealed cast ironBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosetting plastics (GRP, CRP)Grey/nodular cast iron (GG/GJL, GGG/GJS)Hardened, heat-treated steels over 370 HV (38 HRC)Nickel-based alloys (e.g. Inconell and Hastelloy)Recommendations for useTear to the necessary size as needed.Technical informationWidth9 inDrive typeManual applicationGrit40Pack qty50
PEARL | Cut-Off Wheel | Slimcut Redline | Aluminum Oxide
PROPRIETARY HIGH-PERFORMANCE GRAIN FOR EXCEPTIONAL CUTTING SPEED AND LIFE Type 1 (41) and Type 27 (42) Slimcut™ are thin cut-off wheels from Pearl. Pearl Abrasive has an expanded line of thin cut-off wheels that meet a variety of performance standards and price demands. Aluminum Oxide. Ferrous metals, iron, steel, non-ferrous, sheet metals, copper and stainless steel. IN STACKABLE PLASTIC CONTAINERS. 25 wheels per container WARNING: Cancer For more information, go to www.P65Warnings.ca.gov
Pearl | Cutoff Wheel - Chop Saws/Stationary Saws | Aluminum Oxide | PREMIUM | Type 1
Cut-off wheel for chop saws and stationary saws. Aluminum Oxide Premium line Ferrous metals, iron, steel, angle iron, rebar, pipes. T-1 shape. WARNING: This product can expose you to chemicals, including Phenol, Formaldehyde, and Sulfur, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: THIS PRODUCT CAN EXPOSE YOU TO FORMALDEHYDE, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER. For more information, go to www.P65Warnings.ca.gov
Pearl | Cutoff Wheel - Chop Saws/Stationary Saws | Aluminum Oxide | SILVER LINE | Type 1
Cut-off wheel for chop saws and stationary saws. Aluminum Oxide. Silver Line™. Ferrous metals, iron, steel, angle iron, rebar, pipes. T-1 shape. WARNING: This product can expose you to chemicals, including Phenol, Formaldehyde, and Sulfur, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov